Audited Supplier
XF18/32
Technical Support Fteor Wholelife of The Equipment
12months
Colored Steel
CE
New
Customized
Roof, Wall
Hydraulic Pressure
Customized
Within1.00mm
Ibr Panel Cold Roll Forming Machine
Delta
Touch Screen Operation
XF
The Whole Machine Is Shipped Without Packaging.
China
8455221000
Product Description
Double layer roll forming machine can be made as clients' requirements and drawings. You can choose two roof or wall profiles, two IBR profiles, two corrugated profiles, or one IBR and one corrugated profile, or one glazed roof profile and one IBR or one corrugated profile. This machine is for making color steel corrugated panel and IBR roof sheet for Europ customer. Double layer machine can save clients' cost and factory space.
Trapezoidal Roof Panels
Shape and Design: Trapezoidal panels feature a flat base with sloped sides, resembling a trapezoid. This design allows for better water drainage and can provide a more modern aesthetic.
Strength: They are typically stronger and can support heavier loads, making them suitable for commercial and industrial applications.
Installation: Trapezoidal panels are usually easier to install due to their interlocking design, which can enhance weather resistance.
Applications: Commonly used in warehouses, factories, and large commercial buildings.
Corrugated Roof Panels
Shape and Design: Corrugated panels have a wavy or rippled surface, which helps to increase their strength while reducing material usage.
Flexibility: They are often lighter than trapezoidal panels and can be easier to handle, making them suitable for residential applications.
Aesthetic: They offer a more traditional look, which can be appealing for certain architectural styles.
Applications: Frequently used in agricultural buildings, sheds, and residential roofing.
| No | ||
| 1 | Suitable Material | GI/PPGI |
| 2 | Rows Of Rollers | Up layer:12rows Down Layer:16Rows |
| 3 | Productivity | 0-15m/min |
| 4 | Sidewall thickness | 16mm |
| 5 | Machine Frame | 400 H Steel |
| 6 | Total Power | 4+4KW |
| 7 | Thickness Of Raw Material | 0.3-0.6mm |
| 8 | Diameter Of Shaft | 70mm |
| 9 | Voltage | 220V 60Hz 3phases or 380V 50HZ 3phases or Customized |
The Chart of Process Flow
Components and Technical Specification
| No | Technical Specification | |
| 1 | Manual Uncoiler | Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T Inner diameter: 480-520mm |
| 2 | Main Roll Forming Machine | Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. |
| 3 | Hydraulic system | Adopted top brand hydraulic system components to ensure the stability and lifetime, avoid leakage. Provide the initial power to the cutter through a closed oil tank. It is off without cutting, which can save the power. |
| 4 | Computer Control Cabinet | Function The whole line is controlled by Delta PLC and touch screen operation Frequency converter: Delta communication module,it is easy for operation. The technical data and system parameter can be set by touch operation. Length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use. |
| 5 | Shearing Mechanism | It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
| 6 | Output Table | It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
We are a professional manufacturer of cold roll forming machine. Our main products are metal roof and wall panels roll forming machine, double layer roll forming machine, ridge cap making machine, steel purlin machine, gutter/downpipe machine, metal stud and truss forming machine, steel floor deck machine, rolling shutter door machine, slitting line, bending and shearing machine and so on. And we have passed European CE security certificate.
Our machines have been sold to worldwide, including North/South America, Asia, Africa, Australia and Europe... We know well about the requirement from different regions' customers. We have outstanding export team to listen to your request; the designed team will show you the best proposal according to your request.
We have professional workers and special loading equipment and tools to provide customers with packing and loading services, ensuring that the machines are not damaged during transportation and that customers receive satisfactory machines.
If you need our products, please contact me. We believe that our cooperation will create bright future.
