Idealplusing 220V 50Hz 60Hz 5kVA 10kVA 20kVA 45kVA 200kVA 4000W 8000W 16kw 160kw Static Frequency Converter Inverter Frequency Power Supply

Q: Why there are 50Hz and 60Hz?
A: 
The frequency (50 Hz or 60 Hz) of AC power source was selected arbitrarily when systems were stand-alone (not interconnected) Therefore if you had a water mill driving a generator to power the machines in your factory it didn't really matter. This gave rise to a wide range of frequencies being used from around 15 Hz up to 90 Hz and beyond. This was OK for powering machinery. However when electric light was introduced it was clear that at any frequency below about 45 Hz you could see an incandescent light bulb flickering. Thereafter 50Hz was the general minimum. AEG in Germany drove towards 50Hz which spread throughout Europe and Westinghouse settled on 60Hz which became the norm in the US. These practices spread across the world according to areas of influence - Africa and most of Asia is 50Hz while all of the Americas, parts of Japan and the Philippines and the Pacific islands are all 60Hz. This leads to some interesting situations with US bases in Europe which have to have 60Hz generators and are generally isolated from the normal supplies. You can use a static frequency converter to change between them.

IPS-FC6210

3 Phases Input and Single Phase Output 10KVA Frequency Converter
Input Phase : 3 phases 4 wires 
Input voltage: 380VAC±15%
Input frequency:  60Hz
Output :  Single Phase 
Output voltage: 0-300VAC Continuously adjustable
Voltage accuracy: ≤±1%
Output frequency:  47-63hz adjustable 
Frequency adjustment resolution:  0.1Hz
Low Grade Output current:83.3A 
High Grade Output current:41.6A 
Output capacity: 10KVA,8000W  
Circuit mode: IGBT/SPWM
Machine size: W430×475H×600D(MM) 
NW/GW: 70KG/100KG 

IPS-FC6875 
3 phase 380V 60HZ to 3 Phase 0-115VAC 400HZ  75KVA Frequency Converter
Input voltage: 3 phase 4 wire 380/220 VAC 60 Hz
Output voltage: 3 phase 4 wire 115 VAC Standard ) 400 Hz
Output Voltage :Low Range 0-260VAC
Output Voltage : High Range 0-520VAC
Voltage accuracy: ≤±1%
Output frequency: 400HZ ( fixed)
Frequency adjustment resolution: /
Low Grade(Each phase) Output current:208.4A
High Grade(Each phase)Output current:104.2A
Output capacity: 75KVA,60KW
Circuit mode: IGBT/PWM
Machine size: 1000*800*1800(MM)
NW:380KG ,GW:450KG

IPS-FC68200
3 phase 380V 60HZ to 3 Phase 0-115VAC 400HZ 200KVA Frequency Converter
Input voltage: 3 phases 4 wires +G 380VAC±10%
Input frequency: 50Hz±5% or 60Hz±5%
Output voltage: 3 phase 4 wires +G 
Output voltage:  High: 0-520VAC
Output frequency: 40-499.9Hz adjustable 
Voltage accuracy: ≤±1%
Output low current: L-N 560A
Output high current: L-N 280A 
Output capacity: 200KVA,160KW 
Circuit mode: IGBT/SPWM
Machine size: 1200*800*1850(MM) 
NW/GW: 820KG/880KG
Overload, high temperature, short circuit, instantaneous power outage protection, alarm.

IPS-FC6215 
Single Phase Input 3 Phases Output 15KVA 12KW Frequency Converter
Input Phase : Single Phase 
Input voltage: 220VAC±10% 
Output Phase: 3 Phases 
Output voltage: 0-520VAC Continuously adjustable
Voltage accuracy: ≤±1%
Output frequency: 50hz
Frequency adjustment resolution:  0.1Hz
Low Grade(Each phase) Output current:42A 
High Grade(Each phase)Output current:21A
Output capacity: 15KVA,12KW  
Circuit mode: IGBT/SPWM
Machine size: 780*500*1060(MM) 
NW/GW: 180KG/200KG  

IPS-FC6845
3-phase 220V 60HZ to 3-Phase 0-520VAC 50HZ 45KVA Frequency Converter
Input Phase : 3 phase
Input voltage: 220VAC±10% 60HZ
Output Phase: 3 Phases
Output voltage: 0-520VAC
Voltage accuracy: ≤±1%
Output frequency: 50HZ
Frequency adjustment resolution: 0.1Hz
Low Grade(Each phase) Output current:125A
High Grade(Each phase)Output current:62A
Output capacity: 45KVA,36KW
Circuit mode: IGBT/SPWM
Machine size: 1000*800*1800(MM)
NW:380KG ,GW:400KG

SPECIFICATION (AZY-FC61) SINGLE-PHASE INPUT SINGLE-PHASE OUTPUT