Audited Supplier
Line-frequency induction copper melting furnace is mainly used for melting bronze, brass and other copper alloy. Besides the furnace together with other related machines forms a series of production lines applied to produce copper rods, copper tubes, copper strips, etc.
The products are widely used in electric wire, cable, and electronics, lock making, water heating equipment, refrigeration industries and so on.
The induction furnace is mainly composed of furnace shell, refractory lining material, insulation bricks, refractory bricks, iron core, induction coil, water jacket, power cabinet, etc.
Working principle of power frequency melting holding furnace furnace is electromagnetic induction, after applying AC voltage induction coil produces alternating magnetic flux, magnetic drift diameter core, constitute and closed magnetic circuit (silicon steel sheet: Z10), the alternating magnetic flux in the melting groove induced electromotive force and the secondary current, the current through the resistance of the metal raw material, converts electrical energy into heat energy, heat the metal in melting channel. Melting and holding furnace is composed of furnace body part, furnace frame, inductor, hydraulic system and etc. The molten channel in the inductor of the melting furnace is in horizontal form, and the two sides are equipped with hydraulic backward tilt furnace device, which can quickly and safely replace the mold in the crystallizer. The whole furnace is built by masonry of quartz sand and firebrick. When building the furnace, the center position of the crystallizer is precisely positioned with the installation of single hole furnace mouth, which avoids the defect of rebuilding the furnace and inaccurate center finding. The front side of the furnace is composed of door brick, mouth brick, crystallizer component and furnace panel device. The inductors of the combined furnace are water-cooled and insulated in the middle. The inlet water pressure of water cooling device of inductor shall not be less than 0.4mpa. In the smelting process, the inlet water temperature shall not be higher than 25ºC, the outlet water temperature shall not be higher than 55ºC, and the water flow shall be tested frequently. If the water flow is lower than the required, the scale shall be cleaned. The induction coil is made of mica tape and double fiberglass tape wrapped flat copper tube, and the water jacket is made of 3mm1Cr18Ni9Ti stainless steel plate.
Model | Melting rate Ton/h | Rated Power(KW) | Voltage(V) | Temperature(ºC) |
| CTM-200 | 0.2 | 60 | 380 | 1250 |
| CTM-300 | 0.3 | 80 | 380 | 1250 |
| CTM-500 | 0.5 | 120 | 380 | 1250 |
| CTM-750 | 0.75 | 180 | 380 | 1250 |
| CTM-1000 | 1 | 300 | 380 | 1250 |
| CTM-1500 | 1.5 | 450 | 380 | 1250 |
| CTM-2000 | 2 | 600 | 380 | 1250 |
| CTM-3000 | 3 | 900 | 380 | 1250 |
| CTM-5000 | 5 | 1500 | 380 | 1250 |
| The power in the table is for melting red copper, melting brass×0.85 | ||||
Shanghai Cast Technology Co., Ltd.
As a professional manufacturer and exporter of metallurgical machinery and equipment, Shanghai Cast Technology Co., Ltd. specializes in the design, research and development, manufacture, sales, and service of metallurgical casting equipment. Owning the advanced technology and experienced engineering team, we provide professional solutions to the field of metallurgical machinery and equipment.
After operating for over twenty years, we have established comprehensive supply chains for metallurgical equipment. Our products meet the international quality standards and have earned an excellent reputation in various global markets. As a result, we have become a trusted supplier to numerous renowned domestic and international companies.
What we can provide?
Our main products include line-frequency induction melting furnaces, horizontal continuous casting machines, upwards continuous casting machines, semi-continuous casting machines, heat treatment furnaces, extrusion machines, wire drawing machines, rolling mills, dust removal equipment, surface milling machines, and cooling tower, and other related metallurgy and casting equipment.
In addition, we also provide clients who open new factories with such services as model section of complete equipment, production technology consultation, installation, commissioning and operation process training, total-package production technology, turnkey project management, and one-stop after-sales service. We customize different products according to clients' different requirements and offer worry-free pre-sales, in-sales, and after-sales services.
What is the principle that we adhere to?
Shanghai Cast Technology is committed to upholding the principles of quality, reputation, and responsibility as a core part of our management philosophy. We will continue to work with well-known domestic research and design institutions to constantly improve our equipment manufacturing technology, optimize equipment performance, and meet the unique product requirements of each of our clients. We will also continuously enhance our after-sales service and technical support, and collaborate with our clients to progress together. We hope that our equipment can help our clients generate the greatest production value and wealth.
We sincerely welcome both our current and potential clients to communicate with us and discuss business opportunities. We are eager to work closely with our clients to build a brighter future together.
Q1: Are you the manufacturer?
A 1: Yes, we are manufacturer. We have our own factory and a group of professional technicians.
A2: Our main products include Medium frequency furnace,line-frequency induction melting furnaces, electric furnaces, horizontal continuous casting machines, upwards continuous casting machines, semi-continuous casting machines,dust removal equipment, surface milling machines, and cooling tower, and other related metallurgy and casting equipment.
Q 3: What are the ways of payment?
A 3: We support FOB, CFR, CIF,DAP, payment terms:Letter of Credit, wire transfer, D/P, paypal, Western Union, Micropayments, MoneyGram.
Q 4: What kind of shipments can you offer?
A 4: By sea, air or express(DHL, Fedex, TNT, UPS, EMS).
