Audited Supplier
Induction Heating Machine heating for Roller Case Hardening
Induction Hardening Machine Features1. Siemens IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2. 100% Duty cycle, continuous working is allowed at maximum power output.
3. Display of heating power and heating current and oscillating frequency;
4. Simple to install, Installation can be done by unprofessional person very easily;
5. Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
Induction Hardening Machine Applications
A.External circular quenching series, for all kinds of shaft, rods, tubes, circular parts,such as bearings, valve, whole or local quenching of outside round surface.
B.Plane quenching series, the end of the mechanical parts and plane parts of the whole or local quenching,such as machine slideway, linear slide rail.
C.Alien parts quenching series, heterogeneous parts surface integral or local quenching,such as car crankshafts, camshaft.
D.Large parts of quenching series, the quality of larger, heavier super-large parts whole or local quenching,such as Marine gear, dam locks rails and large oil pipelines, roll.
E.Internal quenching series,for all kinds of tubes, mechanical parts inside circles whole or local quenching,such as cylinder liner,bushings.
Advantages and characteristics:
1. The coil is usually 500mm or 1000mm long, and there are five to ten pieces of metal bars inside the coil to be heated. Coil size is depended on the rod diameter, and coils can be easily changed.
2. The output oscillating frequency is about 5-15kHz when heating rods from diameter dia 10 to 80mm, penetrating heating is maintained, at the same time, high heating efficiency can be achieved.
3. Pneumatic rod feeding system is applied, and to certain rod, only the heating power and the feeding speed are adjusted to send the red rod out continuously by step. It is very convenient to operate.
4. With the small size and tight structure, the Rod heating furnace can be put besides the press machine to ease the
| Model | GSF-40 | GSF-70 | GSF-90 | GSF-120 | GSF-160 | GSF-200 | GSF-260 |
| Worker power | Three phase 380V/50Hz | Three phase 380V/50Hz | Three phase 380V/50Hz | Three phase 380V/50Hz | Three phase 380V/50Hz | Three phase 380V/50Hz | Three phase 380V/50Hz |
| Working voltage range (AC) | 342V~430V | 342V~430V | 342V~430V | 342V~430V | 342V~430V | 342V~430V | 342V~430V |
| Max input current | 60A | 105A | 135A | 180A | 240A | 300A | 390A |
| Max output power | 40KW | 70KW | 90KW | 120KW | 160KW | 200KW | 260KW |
| Oscillation frequency | 10-40KHz | 10-40KHz | 10-35KHz | 10-35KHz | 10-35KHz | 10-35KHz | 10-35KHz |
| Efficiency | 100% | 100% | 100% | 100% | 100% | 100% | 100% |
| Continuous load rate | 100% | 100% | 100% | 100% | 100% | 100% | 100% |
| Cooling water pressure | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa |
1.Standard wooden case, plywood case, and custormized case;
2. Inner packing: packing plastic film and foam to avoid any damage during shipping
3.Accessories: induction coilX 2, foot pedal X1, installing and operating instruction X1 and custormized;
Shenzhen Geelly Induction Technology Co, Ltd is a Shenzhen based one stop induction heater producer. We are a professional in induction heating machine with scientific research, design, own production line and rich experience in various of heating application. It is a State High-tech Enterprises by Ministry of Science and Technology of China by 2021.
Our registered trademark is "SZGEELLY", Our main products are the semiconductor MOSFET tube And IGBT as the core of induction heating equipment.
Our products including
1, Medium frequency: 1-20kHz: Melting furnace, forging furnace, preheating
2, Ultrasonic frequency: 10-30kHz: Forging furnace,
3, High frequency: 30-100kHz: Brazing, quenching, annealing, preheating, melting, hot sealing
4, Ultra high frequency: 100kHz-1.5MHz: Brazing, quenching, annealing, preheating, melting,
5, Air cooling heating machine: Preheating
6, Handheld mobile induction heater
7, Water chiller
8, Induction coils
9, Graphite Crucibles, ceramic crucible, quartz crucible
Advantage of our machines
1, Small size, light weight
2, Energy-efficient
3, High quality
1. recommend the most suitable machine for customers, according to their application details.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly control all the prduction process 2. Take run test, according to relevant equipment test run regulations.
3. Strictly inspection the machine, before delivery
4. Delivery on time.
After-sale service:
1. 12 months warranty period
2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, we will provide replacement parts after detecting the faults.
3. If any big quality problems occurs during the guarantee period, we will send maintenance 4. technician to provide visiting service after checking with the customer and charge for a favorable price5. We provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.
Q: What's your advantage? Why we choose you?
A: 1,Our factory has over 15 years induction line production experience, we have rich experience in the production and design the induction technology machine for customers.
2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing
3, We use 100% new materials and the striclty control for the production process, in consequence our defective rate is lower than 0.01%
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: 13 Months
A: Sure, we double test all our machines before delivery
For more questions or details about us and our machines, please contact us as below,
