Audited Supplier
Induction Heater Preheating Treatment for Steel Wire Annealing wire annealing heating
Annealing (tempering and modulation):
1. Annealing of various stainless steel products,such as stainless steel basin, annealed and extruded can, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces,
such as golf ball head, hardware copper fitting, aluminum radiator and various aluminum products.
More Application for the induction heating machine:
1, Brazing: it can be used for the brazing of various hardware cutting tools, diamond tools including diamond circular saw from diameter 300-2500mm, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit etc. It is suitable to used for the brazing of circular saw and other tools, usually 9 to 15 seconds is needed to braze one diamond blade.
2, Heat treatment: heat treatment of small parts
3, Melting: Melting below 2KG for gold, sliver, copper, brass, steel and iorn etc4,Forging,
5, Hardening
6, quenching
7,Annealing
Main characteristics:
1, MOSFET and Inverting technologies of First generation been used;
2, Simple structure and light weight;
3, Simple to operate, A few minutes is enough to learn it;
4, Simple to install, Installation can be done by unprofessional person very easily;
5, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
| Model | Input power | Frequency | Input voltage | Duty cycle | Heating current | Retaining current | Time control | Size CM/weight |
| GHF-30B | 30KW | 30-80KHZ | 380V,415V,440V, 50/60Hz, three-phase | 100% | 10-70A | Generator:60*26*50/28KG Transformer:47*27*40/26KG | ||
| GHF-30AB | 30KW | 10-70A | 1--99s | |||||
| GHF-40B | 40KW | 10-90A | Generator:60*26*50/36KG Transformer:47*27*40/33KG | |||||
| GHF-40AB | 40KW | 10-90A | 1--99s | |||||
| GHF-50B | 50KW | 10-105A | | Generator:60*26*50/40KG Transformer:51*27*40/39KG | ||||
| GHF-50AB | 50KW | 10-105A | 1--99s | |||||
| Cable lengthfrom generator to transformer is 2 meters, and max. length is 6 meters | ||||||||
1.Standard wooden case, plywood case, and custormized case;
2. Inner packing: packing plastic film and foam to avoid any damage during shipping
3.Accessories: induction coilX 2, foot pedal X1, installing and operating instruction X1 and custormized;
Shenzhen Geelly Induction Technology Co, Ltd is a Shenzhen based one stop induction heater producer. We are a professional in induction heating machine with scientific research, design, own production line and rich experience in various of heating application. It is a State High-tech Enterprises by Ministry of Science and Technology of China by 2021.
Our registered trademark is "SZGEELLY", Our main products are the semiconductor MOSFET tube And IGBT as the core of induction heating equipment.
Our products including
1, Medium frequency: 1-20kHz: Melting furnace, forging furnace, preheating
2, Ultrasonic frequency: 10-30kHz: Forging furnace,
3, High frequency: 30-100kHz: Brazing, quenching, annealing, preheating, melting, hot sealing
4, Ultra high frequency: 100kHz-1.5MHz: Brazing, quenching, annealing, preheating, melting,
5, Air cooling heating machine: Preheating
6, Handheld mobile induction heater
7, Water chiller
8, Induction coils
9, Graphite Crucibles, ceramic crucible, quartz crucible
Advantage of our machines
1, Small size, light weight
2, Energy-efficient
3, High quality
1. recommend the most suitable machine for customers, according to their application details.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly control all the prduction process 2. Take run test, according to relevant equipment test run regulations.
3. Strictly inspection the machine, before delivery
4. Delivery on time.
After-sale service:
1. 12 months warranty period
2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, we will provide replacement parts after detecting the faults.
3. If any big quality problems occurs during the guarantee period, we will send maintenance 4. technician to provide visiting service after checking with the customer and charge for a favorable price5. We provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.
Q: What's your advantage? Why we choose you?
A: 1,Our factory has over 15 years induction line production experience, we have rich experience in the production and design the induction technology machine for customers.
2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing
3, We use 100% new materials and the striclty control for the production process, in consequence our defective rate is lower than 0.01%
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: 13 Months
A: Sure, we double test all our machines before delivery
For more questions or details about us and our machines, please contact us as below,
