Audited Supplier
Main applications:
These models can be used to heat the rod of steel, stainless steel, copper, brass or aluminium with diameter from dia 10 to 80mm in the shaping of screws, nuts, valves, locks and other metal parts.
Advantages and characteristics:
1. The coil is usually 500mm or 1000mm long, and there are five to ten pieces of metal bars inside the coil to be heated. Coil size is depended on the rod diameter, and coils can be easily changed.
2. The output oscillating frequency is about 5-15kHz when heating rods from diameter dia 10 to 80mm, penetrating heating is maintained, at the same time, high heating efficiency can be achieved.
3. Pneumatic rod feeding system is applied, and to certain rod, only the heating power and the feeding speed are adjusted to send the red rod out continuously by step. It is very convenient to operate.
4. With the small size and tight structure, the Rod heating furnace can be put besides the press machine to ease the operation.
| Main specifications and heating ability | |||
| models | Max. Input Power | Heating ability of normal material | |
| Steel or S.S to 1100 degree C | |||
| GSF-50 forging furnace | 50kw | 1.55KG/min | |
| GSF-70 forging furnace | 70kw | 2.0 KG/min | |
| GSF-90 forging furnace | 90kw | 3.8 KG/min | |
| GSF-160 forging furnace | 120kw | 5.6 KG/min | |
| GSF-160 forging furnace | 160kw | 7.5 KG/min | |
| GSF-220 forging furnace | 220KW | 9.0 KG/min | |
| GSF-260 forging furnace | 260KW | 11.6 KG/min | |
| Installation desire | ||||
| Models | Input voltage | Power supply wire | Circuit breaker | Cooling Water |
| GSF-50 forging furnace | Three phase 380V,415V,480V, 50 or 60HZ | 10 mm soft copper wire | 3P 60A | 10-20L/Min, 0.2Mpa |
| GSF-70 forging furnace | 16 mm soft copper wire | 3P 100A | ||
| GSF-90 forging furnace | 16 mm soft copper wire | 3P 150A | ||
| GSF-120 forging furnace | 35 mm soft copper wire | 3P 250A | 20-30L/Min, 0.2Mpa | |
| GSF-160 forging furnace | 50 mm soft copper wire | 3P 300A | ||
| GSF-220forging furnace | 75 mm soft copper wire | 3P 350A | ||
| GSF-260 forging furnace | 90 mm soft copper wire | 3P 450A | 25-30L/Min, 0.2Mpa | |
Packing detail:
1.Standard wooden case, plywood case, and custormized case;
2. Inner packing: packing plastic film and foam to avoid any damage during shipping
3.Accessories: induction coilX 2, foot pedal X1, installing and operating instruction X1 and custormized;
Our service
1. Pre-sale service:
1. recommend the most suitable machine for customers, according to their application details. 2. Inquiry and consulting support. 3. Sample testing support. 4. View our Factory.2. In-sale service:
1. Strictly control all the prduction process 2. Take run test, according to relevant equipment test run regulations.3. Strictly inspection the machine, before delivery4. Delivery on time.3. After-sale service:
1. 12 months warranty period2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, we will provide replacement parts after detecting the faults.3. If any big quality problems occurs during the guarantee period, we will send maintenance4. technician to provide visiting service after checking with the customer and charge for a favorable price. 5. We provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.
FAQ
China Supplies Induction Heating Power Supply
Questions and Answers:
1. Which countries your products are exported to?
Our products are sold many countries and Areas
2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
3.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port is ok, usually, we will use Shenzhen ,Guangzhou ,Hongkong port, it can appoint as you like.
5.How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 30% deposit,70% before shipment (we will take relative pictures for total delivering process for customer's confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
6.If I have paid but can not receive the goods, how should I do?
Made-in-china website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear,
7.What is your nature of your company:dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us.
