YLD-SF-2000
Niphos Water Filter
Environmental Protection
Pressure
Vertical
Sophisticated Filters
CE
Multimedia Filter
30m3/H
2000*3100mm
Dn100mm
1.2t
0.6MPa/1.0 MPa
Automatic or Manual
Can Be Customized
Solid Particles Removal
Waste Water and Industrial Water Treatment
YLD
Plywood Case Into Container
CE, SGS
Jiangyin, Jiangsu
8421219990
Product Description
Industrial Graded Silica Quartz Sand Filter for Paper Mills
Pressure Sand Filter offered by us is used for water purification processes for different types of water like river water, lake water, bore well water filtration and others. For delivering optimum performance, these pressure sand filters consist of a pressure vessel that can be either vertical/ horizontal-fitted with a set of:
Description:
Frontal pipe work and valves
Graded silica quartz sand that is supported by layers of graded under bed consisting of pebbles & gravels
Distributor to distribute incoming water uniformly throughout the cross section of filter
Under drain system to collect filtered water
This product generally also known as:





Pressure Sand Filter
PSF
Sand Filter
Dual Media Filter
Multi Grade Sand Filter
Anthracite Filter
Pressure Filter
Garnet Sand Filter
Pressure Sand Filter
Sand Filter
Application
Water treatment plant
Feed water of RO plant
Post treatment of wastewater treatment plant
Pretreatment of ion exchange based plant
Iron removal &Fluoride removal
Fountain, Water bodies and swimming pool
Rain water harvesting.
Gardening & washing application.
River& lake water treatment.
Process water.

Working Principle
Also refers to multi-layer filter, a typical multimedia filter contains three layers of filter media ( anthracite coal , sand and garnet). The principle behind using these three types of filtration media is the difference between particle size and density properties of these materials. Anthracite media is the lightest and largest particle size media, which remains of top following backwash while the intermediate size media (sand) will settle in the middle and garnet, the heaviest but having the smallest particle diameter, will settle to the bottom. Periodically backwashed is mandatory to remove contaminants trapped in the media during filtration process.
This kind of arrangement allows the largest dirt particles to be removed at the top media bed and the smaller and smaller dirt particles being retained deeper and deeper in the media. This down-flow filtration permits delivery of high quality filtered water at much faster flow rates; typically particle removal approximately 5 to 25 microns.
Technical Parameters:
FAQ:
01. how small a solid needs to be removed,
02. how dirty the water is,
03. how the water will be used once it is filtered,
04. and the source of backwash water needed to clean the filters.
Pressure Sand Filter offered by us is used for water purification processes for different types of water like river water, lake water, bore well water filtration and others. For delivering optimum performance, these pressure sand filters consist of a pressure vessel that can be either vertical/ horizontal-fitted with a set of:
Description:
Frontal pipe work and valves
Graded silica quartz sand that is supported by layers of graded under bed consisting of pebbles & gravels
Distributor to distribute incoming water uniformly throughout the cross section of filter
Under drain system to collect filtered water
This product generally also known as:





Pressure Sand Filter
PSF
Sand Filter
Dual Media Filter
Multi Grade Sand Filter
Anthracite Filter
Pressure Filter
Garnet Sand Filter
Pressure Sand Filter
Sand Filter
Application
Water treatment plant
Feed water of RO plant
Post treatment of wastewater treatment plant
Pretreatment of ion exchange based plant
Iron removal &Fluoride removal
Fountain, Water bodies and swimming pool
Rain water harvesting.
Gardening & washing application.
River& lake water treatment.
Process water.

Working Principle
Also refers to multi-layer filter, a typical multimedia filter contains three layers of filter media ( anthracite coal , sand and garnet). The principle behind using these three types of filtration media is the difference between particle size and density properties of these materials. Anthracite media is the lightest and largest particle size media, which remains of top following backwash while the intermediate size media (sand) will settle in the middle and garnet, the heaviest but having the smallest particle diameter, will settle to the bottom. Periodically backwashed is mandatory to remove contaminants trapped in the media during filtration process.
This kind of arrangement allows the largest dirt particles to be removed at the top media bed and the smaller and smaller dirt particles being retained deeper and deeper in the media. This down-flow filtration permits delivery of high quality filtered water at much faster flow rates; typically particle removal approximately 5 to 25 microns.
Technical Parameters:
Model | TANK SIZE (mm) | TOTAL HIGH (mm) | FLOW RATE (m3/hr) | INLET AND OUTLET (mm) |
YLD-MF-500 | 500*1500 | 2350 | ~2 | DN32 |
YLD-MF-600 | 600*1500 | 2380 | 2-3 | DN32 |
YLD-MF-700 | 700*1500 | 2400 | ~4 | DN40 |
YLD-MF-800 | 800*1500 | 2400 | ~5 | DN40 |
YLD-MF-900 | 900*1500 | 2500 | ~6 | DN50 |
YLD-MF-1000 | 1000*1500 | 2600 | ~8 | DN50 |
YLD-MF-1200 | 1200*1500 | 2700 | ~11 | DN65 |
YLD-MF-1400 | 1400*1500 | 2800 | ~15 | DN65 |
YLD-MF-1500 | 1500*1500 | 2850 | ~18 | DN65 |
YLD-MF-1600 | 1600*1500 | 2900 | ~20 | DN80 |
YLD-MF-1800 | 1800*1500 1800*1800 | 3000 | ~25 | DN80 |
YLD-MF-2000 | 2000*1500 | 3100 | ~30 | DN100 |
YLD-MF-2200 | 2200*1500 | 3180 | ~38 | DN100 |
YLD-MF-2400 | 2400*1500 | 3330 | ~45 | DN100 |
YLD-MF-2500 | 2500*1500 | 3380 | ~50 | DN100 |
YLD-MF-2600 | 2600*1500 | 3430 | ~55 | DN125 |
YLD-MF-2800 | 2800*1500 | 3530 | ~60 | DN125 |
YLD-MF-3000 | 3000*1500 | 3630 | 70-80 | DN125 |
YLD-MF-3200 | 3200*1500 | 3730 | 80~100 | DN150 |
FAQ:
01. how small a solid needs to be removed,
02. how dirty the water is,
03. how the water will be used once it is filtered,
04. and the source of backwash water needed to clean the filters.