Audited Supplier
WiFi6 3000Mbps industrial WiFi router with RS485 and RS232
KS-BL5000 is a high-power, high-speed, high-performance Wi-Fi6 standard PCBA; Qualcomm IPQ5018 enterprise chip, 2.4G+5.8G dual band, 3000Mbps wireless high-speed, 160MHz bandwidth, support IEEE 802.1kvr seamless roaming, allow users to access into the high speed wireless signal always; With wide voltage power supply, RS485 and SP3232 terminal access, serial port access, high and low temperature up to -40~70 degrees, is widely used in UAV Communication control, industrial automation, oilfield data acquisition, hydrological monitoring system, vehicle monitoring, wireless meter reading, smart home, Safety and fire protection system, wireless SP3232 data communication, and other transmission fields.
Main Features:
- Qualcomm enterprise chips, all kinds of ICs are world-class brands, with high stability and MTBF ≥ 850000H;
- External power amplifier, high power with detachable antenna, stronger wireless signal with wider coverage;
- 3000Mbps high speed, multiple ports, wide-range voltage, widely be used in different area;
- Support 802.11kvr seamless roaming, users automatically switch to high stability signal but no Wi-Fi dropping;
- Support WPA3 and 802.1x advance encryption, guard wireless network security all the time;
- Strong hardware and firmware technical support for PCBA integrated.
| Hardware Spec: | |
| Model | KS-BL5000 |
| WiFi Standard | IEEE 802.11b/g/n/ac/ax |
| CPU | IPQ5018 + QCN6102 +QCA8337 |
| Flash | 8MB_SPI_NOR Flash+128MB_SPI_LNAND Flash |
| Memory | 256MB |
| Frequency | 2.4G: 2400 - 2484MHz |
| 5.8G: 5150 - 5850MHz -6900MHZ | |
| Data Rate | 600Mbps @ 2.4GHz; 2400Mbps @5.8GHz |
| RF Power | 2PCS antenna: 2.4G≥22 dBm/chain; 5.8G≥21dBm/chain |
| Access Users | 100+ Clients |
| Ethernet | 1*10/100/1000Mbps WAN,RJ-45; |
| 1 * 10/100/1000Mbps LAN,RJ-45 | |
| Communication terminal | 1 * RS485; 1 * SP3232; |
| Button | Reset button |
| LED Indicator | PWR LED |
| SYS LED | |
| 2.4G LED | |
| 5.8G LED | |
| Antenna | SMA Connector |
| Power Consumption | <14W |
| Power Supply | Input 9~24V, Phoenix Contact |
| MTBF | ≥850000H@25ºC |
| Working temperature | Working Temperature:-20ºC~55ºC |
| Storage temperature: -40ºC~70ºC | |
| Humidity | 5%~95% |
| Dimensions | |
| Firmware Features | |
| Operation mode | AP or Mesh |
| Wireless Functions | Multiple SSID functions: 2.4GHz: 8; 5.8GHz: 8. |
| Support SSID hidden | |
| Support seamless roaming, 802.11kvr standard. | |
| Support 5G Prior for a faster Ethernet. | |
| Support MAC filter | |
| Support parental control to limited the online time and Children behavior. | |
| Support client isolation to improve the wireless stability | |
| VPN | VPN Passthrough and VPN Client (L2TP PPTP) |
| Security | Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x, WPA3 |
| IP Protocol | IPv4/IPv6 |
| Device Management | GUI web management |
| Support firmware back-up, restore, reset, upgrade | |
| Packing List | KS-BL5000 PCBA |
Pop bag + Carton box
2 years warranty
7*12 hours technical support
Q1. What's kind of operation mode it support:
A: AP, mesh, can use it in any environment to provide stable wireless signal;
Q2. If work with AP controller:
A: Yes, worked with AP controller in MQTT protocol;
The AP controller can be gateway or AP controller bypass mode;
After work with AP controller, it support AP central management,AP group management, multiple authentications like SMS, email, account auth, radius auth, facebook auth..., can generate the working diagram automatically.
We can send you the AP controller's remote control link, you can login and check the functions before samples purchase;
Q3. If work with cloud:
A. Yes, worked with cloud management, support AP configure, AP group configure, AP location configure...
What's more, can support SDN if want;
Can send you the cloud and AP's remote control link, you can login to check the AP's web interface and cloud function in advance before samples purchase;
Q4. If support out of China production:
A. Yes, this is developed by our engineers, we can support SKD and CKD;
We can provide the SOP of assemble and finished product testing;
But for the CKD, firstly you can do the RF calibration, 2nd you should have engineer to debug the problem;
We can provide SOP or all documents, and we can send engineers to provide technical support, but will be costly.
Q5. What's the OEM and ODM service?
A: OEM: provide your LOGO to us, we can add your LOGO on the product, firmware and package;
Content will be limited by MOQ;
ODM: we can provide PCBA, housing and firmware ODM service:
PCBA: 2~3 month to finish it;
Housing: 2 month after finish the PCBA;
Firmware: we can provide the open source driver for customer to develop their firmware;
We can provide DTS files if want;
And we can provide technical support in customer firmware development.
