Audited Supplier
Introducing our Exciting GF15 Reinforced Nylon 66 Resin Injection Grade Plastic!
Are you in need of a high-quality engineering plastic that offers exceptional rigidity, hardness, and thermal dimensional stability? Look no further! Our GF15 Reinforced Nylon 66 Resin Injection Grade Plastic is the perfect solution for all your durability and reliability needs.
Known for its outstanding wear resistance, low frictional properties, and excellent temperature, chemical, and impact resistance, this injection grade plastic is a game-changer. Whether you're working on cable tie injection molding or any other application that requires top-notch performance, our GF15 Reinforced Nylon 66 Resin is the way to go.
With its durable PA66 polymer chips, you can trust that your products will stand the test of time. Say goodbye to worries about wear and tear, as this plastic is designed to withstand even the toughest conditions. Plus, its low frictional properties ensure smooth operation and reduced frictional heat, making it ideal for a wide range of applications.
At Suzhou Furenxiang Trade Co., Ltd., we take pride in being your go-to supplier for high-quality raw materials. Our GF15 Reinforced Nylon 66 Resin is just one of the many products we offer to meet your engineering needs. With our extensive range of polymer chips, resin granules, and raw materials, you can trust that you're getting the best in the industry.
So why wait? Upgrade your projects with our GF15 Reinforced Nylon 66 Resin Injection Grade Plastic today! Contact us at Suzhou Furenxiang Trade Co., Ltd. to place your order and experience the difference for yourself.
Ultramid® A3EG6-PA66-GF30
Glass-fiber reinforced injection molding grades for machine parts and housings with high stiffness and dimensionally stable properties, e.g. lamp holder housings , cooling fans, insulating profiles for aluminum window frames
| Radiator tanks and electrical insulation components for automotive cooling systems. | |||
| Rheological properties | Dry/Conditioned | unit | standard test |
| Melt volume flow rate, MVR | 30/* | cm³/10min | IS01133 |
| temperature | 275/* | ºC | ISO 1133 |
| load | 5/* | kg | IS01133 |
| Die shrinkage, parallel | 0.5/* | 9% | IS0294-4,2577 |
| Die shrinkage, vertical | 1.0/* | 9% | ISO 294-4,2577 |
| Mechanical behavior | Dry/Conditioned | unit | standard test |
| Tensile modulus | 10000/7200 | MPa | ISO527-1/-2 |
| Fracture stress | 190/130 | MPa | IS0527-1/-2 |
| Elongation at break | 3/5 | 9%6 | IS0527-1/-2 |
| Tensile creep modulus, 1000h | *15300 | MPa | ISO 899-1 |
| Unnotched simply supported beam impact strength, +23ºC | 85/100 | kJ/m2 | ISO 179/1eU |
| Unnotched simply supported beam impact strength, -30ºC | 70/70 | kJ/m2 | ISO 179/1eU |
| Simple supported beam notched impact strength, +23ºC | 11/20 | k/m2 | IS0179/1eA |
| Simple supported beam notched impact strength, -30°ºC | 10/9.5 | kJ/m² | ISO 179/1eA |
| Thermal properties | Dry/Conditioned | unit | standard test |
| Melting temperature, 10°C/min | 260/* | ºC | ISO 11357-1/-3 |
| Heat deformation temperature, 1.80MPa | 250/* | ºC | IS075-1/-2 |
| Heat distortion temperature, 0.45 MPa | 260/* | ºC | IS075-1/-2 |
| Vicat softening temperature 50ºC/h 50N | 250/* | ºC | IS0306 |
| Coefficient of linear expansion, parallel | 28/* | E-6/K | IS011359-1/-2 |
| Coefficient of linear expansion, vertical | 88/* | E-6/K | IS011359-1/-2 |
| Combustibility at 1.5mm nominal thickness | HB/* | class | IEC60695-11-10 |
| Thickness of test specimen | 1.6/* | mm | IEC60695-11-10 |
| Yellow Card Existing | Yes/* | ||
| Combustibility at thickness h | HB /* | class | IEC60695-11-10 |
| Thickness of test specimen | 0.8/* | mm | IEC60695-11-10 |
| Yellow Card Existing | Yes /* | ||
| Combustibility ·Oxygen Index | twenty four/* | 9% | IS04589-1/-2 |
| Electrical properties | Dry/Conditioned | unit | standard test |
| Relative dielectric constant, 100Hz | 4.2/9.7 | IEC62631-2-1 | |
| Relative dielectric constant.,1MHz | 3.7/4.3 | IEC62631-2-1 | |
| Dielectric loss factor, 100Hz | 120/1530 | E-4 | IEC62631-2-1 |
| Dielectric loss factor, 1MHz | 210/810 | E-4 | IEC62631-2-1 |
| Volume resistivity | 1E13/1E10 | Ohm*m | IEC62631-3-1 |
| Surface resistivity | */1E10 | Ohm | IEC62631-3-2 |
| Dielectric strength | 40/37 | kW/mm | IEC60243-1 |
| Comparative Tracking Index | -/550 | IEC 60112 | |
| Other features | Dry/Conditioned | unit | standard test |
| Water absorption | 5.5/* | 9% | Similar to IS062 |
| Hygroscopicity | 1.7/* | 9%6 | Similar to IS062 |
| density | 1360/- | kg/m2 | Iso1183 |
| Special properties of molding measurement | Dry/Conditioned | unit | standard test |
| Viscosity number. | 145 | Cm3/g | Iso307 1157 1628 |
Exciting News: Introducing Our Top-Quality GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66!
Are you ready for a game-changer in the world of engineering plastics? Look no further than Suzhou Furenxiang Trade Co., Ltd.! With over 10 years of factory experience, we are thrilled to bring you the highest quality products that will exceed your expectations.
Our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 is a true masterpiece. Meticulously crafted, it guarantees exceptional quality and durability. Say goodbye to subpar materials and hello to a product that will stand the test of time!
But that's not all! We know that price matters to you, and we've got you covered. Our competitive prices ensure that you get the best value for your money. No need to compromise on quality or break the bank. With us, you can have it all!
At Suzhou Furenxiang Trade Co., Ltd., we take pride in our perfect service management system. We've left no stone unturned to meet your needs and provide you with outstanding customer service. Your satisfaction is our top priority!
We understand that you are unique, and so are your requirements. That's why we offer customization options for our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66. Tailor the product to your specific needs and make it truly yours!
Don't miss out on this incredible opportunity to revolutionize your projects. Get your hands on our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 today and experience the difference!
COMPANY INFORMATION | |
Our company is a plastic manufacturer and agent for internationally renowned brands: 1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. 2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic, Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc. |
