Insertion Type Stainless Steel Gas Liquid Steam Gas Flow Meter Digital Steam Biogas Vortex Compressor Air Flow Meter

Price $1000.00 Compare
Min Order 1 Piece
Shipping From Shanghai, China
Popularity 220 people viewed
Quantity
+-
 

Aister Instrument (Shanghai) Co., Ltd.

VIP   Audited Supplier 2 years
Profile Certified by SGS/BV
LUGB
>±1%
Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas
Tube/Flange
Industrial Production
Vortex Flow Meter
Electrical Principles
Closed Pipeline
CE, ISO
DN15 - 300
DC12V or DC24V
Typically -40 ~ 150 Degree
Carbon Steel, Stainless Steel
Carton Box with PP Film Wooden Box
China
9026801000
Product Description
Product Description

The company produced LUGB vortex flowmeter, there are remote transmission type, field display type, temperature and pressure automatic compensation type. Can be widely used in chemical, petroleum, metallurgy, light industry, environmental protection, municipal, electric power and other departments.

Product Parameters
PerformanceTechnical parameter
Measuring mediumSteam, compressed air, liquid (single phase media)
Medium temperature-40ºC~+350ºC
Medium pressure1.6,2.5,4.0Mpa
Range ratio1:8~1-30(air at reference scale) 1:8~1:40(Refer to normal temperature water)
Measuring rangeLiquid 0.4 ~ 0.7m/s Gas 4.0 ~ 60m/s Steam 5.0 ~ 70m/s
SpecificationDN25~DN300mm
Material304, 316L a variety of materials
Reynolds numberNormal 2 x 104Cd to 7 x 106
Drag coefficientCd≤2.6
Vibration accelerationLUGB type≤0.2g
Class of protectionIP65
Explosion-proof class(ia)   II CT6
AccuracyLevel 1.0, level 1.5
Environmental conditionAmbient temperature-40ºC~+55ºC(non-explosion-proof place) -20ºC~+55ºC(explosion-proof place)
Relative humidity≤85%
Atmospheric pressure86~106Kpa
Power supplyNon-explosion-proof typePulse type+12VDC 20mA
current type+24VDC 20mA
Output signalFrequency pulse signal 2 ~ 3000Hz Low level ≤1V High level ≥6V
Two-wire 4-20mA signal (isolated output) load ≤500Ω
Why Choose Us
Installation Instructions
  1. When using a vortex flowmeter to measure steam, the body and pipe must be insulated, the flange must be clamped, and there must be no air leakage, otherwise the instrument is easy to damage;
  2. It is better to install the instrument indoors, away from vibration and strong electromagnetic interference. If outdoors, the watch head can be protected;
  3. The instrument should have 10-15 times the straight pipe section, and then have more than 5 times the straight pipe section. Select the installation place to facilitate installation, wiring and debugging;
  4. For a straight pipe section, weld the two flanges before installation, then install the instrument and clamp it, cut off the equal length straight pipe, and then install the whole table welded before. Never weld the watch on the flange.
Model Selection
Selection Directions:

1. Measuring medium: Vortex flowmeter is a speed flowmeter, its principle, determines its measuring medium type, can be liquid, can also be gas or steam;

2. Pipe diameter: Flange connected vortex flowmeter can be divided into pipe type and insert type installation according to the different installation methods;

3. Measurement accuracy: The accuracy of the flange connected vortex flowmeter also has several grades, and it is divided according to the measurement medium. If it is to measure liquid, the measurement accuracy can reach 1.0%, and if it is to measure gas, the accuracy can reach 1.5%. If it is inserted vortex flowmeter, the accuracy can reach level 1.5% and 2.5%;

4. Medium temperature: Generally speaking, it is divided into three ranges, which are divided into normal temperature, medium and high temperature;

5. Nominal pressure: mainly divided according to the installation method, the main demand on the market is as follows: for example, flange clamp type (2.5MPa), flange connection type (1.0/1.6/2.5MPa), plug-in installation type (1.6MPa/2.5MPa/4.0MPa);
Calibration
Critical Venturi Sonic Nozzle Calibration Device

Certifications

        Q: How long is your delivery time?
       A: it depends on the quantity. Normally it's about a week to two weeks.

        Q: How to get quotation?
       A: Please tell us the pipe diameter, measuring medium, flow rate, temperature, pressure, connection type and accuracy of the product you need, we will choose the most suitable product for you.

        Q:can i design our own logo or color ?
       A:sure ! we are glad to help you.

        Q:Can I place a small order for the first time?
       A:YES. This shows your recognition of us, I believe we will have longer-term cooperation.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA