Audited Supplier
OIL DUCT STRIP TRANSFORMER OIL DUCT :
We have one pressboard stick (oil duct stick) equipment and 4 sets full-automatic edge fixing lines. Our daily putout is 10000 pcs duct stick to supply. We could provide 500 m oil duct strip one day. Oil duct strip provides duct for the flow of the cooling oil in layer and strip windings in distribution power transformers. It is manufactured by bonding transformer board sticks onto insulating paper or single-coated diamond dotted paer. Duct strip has the excellent transformer oil impregnation feature, it has high compressive strength more than corrugated pressboard which is the old technology, it's used at high temperature condition and it could be improved the circuit strength.
TRANSFORMER OIL DUCT We have 2SETS pressboard stick (oil duct stick) equipment and 4 sets full-automatic edge fixing lines. Our daily putout is 10000 pcs duct stick to supply. We could provide 500 m oil duct strip one day.
Introduction
Insulation class: A (105 °C)
100% sulphate wood pulp
Natural-color
Precompressed pressboard, even fiber orientation, hard and dimensionally stable
High purity and mechanical strength
Low shrinkage, fiber-free surface
Good compatibility with liquid dielectrics
Product Description
Description and feature:
Duct strip is made from high quality pressboard G4 grade. It has excellent transformer oil impregnation feature, high compressive strength more than corrugated pressboard which is the old technology. It is used at high temperature condition and it could be improved the circuit strength.The character are below:
1. High mechanic strength
2. High electric strength
3. Accurate dimension
Application:
Oil duct strip provides duct for the flow of the cooling oil in layer and strip windings in distribution power transformers. It is manufactured by bonding transformer board sticks onto insulating paper or single-coated diamond dotted paper.
Main strips: Rectangular strips, T-strips, Pigeon cauda strips, Abnormity strips.
TRANSFORMER OIL DUCT STRIP DATA SHEET
PART1: PRESSBOARD STICK4*5*1000MM
| ITEM | TYPICAL VALUES | MATTER OF FACT |
| Thickness: mm | 4mm±7.5% | 4.1-4.3mm≤7.5% |
| Width | 5±0.5mm | 4.95-5.38mm≤0.4mm |
| Length of 1000mm: | ±5mm | 1000±3 mm |
| Pitch of stick centre: | ±3mm | 23±2 mm |
| Apparent density: g/cm3 | 1.1-1.2 | 1.18 |
| Moisture content ,% | 4.0 to 9.0% | 5.7 |
| PH water extract: | 6.0 to 9.0 | 6.8 |
| Ash content,% maximum | 1% | 0.51 |
| Tensile strength Mpa Machine direction: Cross machine direction: | ≥90 ≥50 | 107.4 101.3 |
| Oil absorption | ≥7.0% | 12.29 |
| Shrinkage rate% MD CMD Thickness D | ≤1.0 ≤1.4 ≤6.0 | 0.16 0.25 ≤5 |
| Elongation rate MD CMD | ≥3 ≥4 | ≥4.4 ≥4.4 |
| Conductivity of aqueous extract Ms/m | ≤10.0 | 5.03 |
| Dielectric breakdown:(Kv/mm )In Air In Oil | 10 24 | 16.7 35.7 |
PART2: SINGLE SIDE DIAMOND DOTTED PAPER DATA SHEET
| ITEM | TYPICAL VALUES | MATTER OF FACT | |
| Caliper: (millimeter) | 0.25mm | ||
| Thickness: mm | 0.25±0.025mm+0.06 | 0.260 (0.260,0.258,0.262) | |
| Width: mm | 1000±5mm | 1000-1005 | |
| Apparent density: g/cm3 | 0.9 to 1.1 | 1.01 | |
| Moisture content ,% | 4.0 to 8.0% | 5.6 | |
| PH water extract: | 6.0 to 8.0 | 7.5 | |
| Ash content,% maximum | 1% | 0. 43 | |
| Coating thickness per side mm | 0.006 to 0.012 | 0.011 | |
| Tensile strength,N/mm2 Machine direction: Cross machine direction: | 80 35 | 86.6 48.1 | |
| Dielectric breakdown: (volts/layer ,dry test) | ≥2100 | 2230 | |
| Bond strength: Kpa | 450kpa | 679 | |
1.Rectangular Strips
2. Trapezoidal Strips
3. T-Strips
Product quality: With consistent quality control throughout the entire process of product design and development, material procurement, production, quality inspection, and sales, the company has passed strict quality system certification and has been widely recognized by well-known customers. The company's products have advantages in quality.
Our products all meet the national standard, IEC standard and ISO standard. We have more than 60 national inventions and utility model patents, and the reliable quality of our products and our superb service has received warm praise from our customers!
We take customer satisfaction as our goal, trying our best to be more professional. In line with the principle of "putting customers first and pursuing continuous improvement" ,we will keep innovating and never stop on our way to become a new material supplier of transformer industry at home and abroad.
Customer visit
Q: How you make sure the quality?
a. We will consult on your requirements, and recommend suitable products to you.
b. Before production, we will send samples to you
c. During production, we will always check quality, package, delivery etc.
d. Before package, with QA to check everything
e. After shipment, we will consult with you about satisfaction.
Q: How to make sure the delivery date?
a. Before production, we will see we can meet your time or not.
b. After your payment, we start our preparing material immediately.
c. During production, We will inform you of the production scheduled.
d. Before shipment, we will inform you to pay the balance on time and booking immediately.
