Audited Supplier
Intelligent High Speed Full Automatic Glass Double Edging Production Line 
18-grinding-head glass high-speed intelligent double-edging production line consists of a testing platform, two glass high-speed intelligent double-edging machines, and an L-shaped turning platform. It is a machine specially used for processing the double straight edges of flat glass and is suitable for deep processing of glass in the construction, furniture and other industries.
1.Main parameters of the line
Processing Size | Model | Minimum Processing Size | Maximum Processing Size |
| SSZM-G18AC(P)-3025L | 300*300mm | 3000*2500mm | |
| SSZM-G18AC(P)-3725L | 300*300mm | 3700*2500mm | |
| SSZM-G18AC(P)-4525L | 330*300mm | 4500*2500mm | |
| SSZM-G18AC(P)-4530L | 330*300mm | 4500*3000mm | |
| SSZM-G18AC(P)-5030L | 450*300mm | 5000*3000mm | |
| SSZM-G18AC(P)-6030L | 450*300mm | 6000*3000mm | |
| Glass Thickness | 3~25mm | ||
| Transmission Speed | Maximum speed without load: 25m/min Load speed range:0~20m/min | ||
| Chamfering Size | 1~3mm | ||
| Max Glass Removal of Bottom Edge | 5mm | ||
| Glass Diagonal Error | ≤±0.5mm/m | ||
| Chamfer Width Error | ≤±0.2mm/m | ||
| Glass Parallel Error | ≤±0.2mm/m | ||
| Power | 380V/50Hz | ||
| Pneumatic Working Pressure | 0.5~0.8Mpa | ||
| Installed Power | ≈132KW | ||
| Working Table Height | 900±30 mm | ||
1.Intelligent and efficient:The entire line is equipped with an industrial Internet of Things system as standard, which can realize remote machine monitoring, remote assisted maintenance, and remote system upgrades.The width adjustment adopts a servo system to drive a high-precision gear rack mechanism with high adjustment accuracy.
2.Automatic compensation function of diamond wheels: All diamond wheels and resin wheels use servo motors to control the grinding position of the grinding wheels, and automatically compensate for the grinding wheel wear according to the total number of meters of glass processed.
3.Automatic distribution of glass grinding amount: This function is used to automatically switch each grinding wheel to different grinding positions when grinding glass of different thicknesses (the grinding amount corresponding to different thicknesses needs to be preset). The system will change the grinding position of each grinding wheel through the servo motor according to the thickness parameters of the current processed glass, and distribute the grinding amount of each grinding wheel in proportion, thereby changing the single-side processing allowance of the glass.
4.Polishing servo automatic compensation function: All polishing wheels adopt servo automatic flexible compensation. During the grinding process, the grinding wheel position changes with the glass position, and the grinding wheel acts on the glass with a constant pressure.
5.Servo film removal function (including film removal grinding head): The film removal grinding wheel adopts servo automatic compensation, and automatically adjusts with constant current during the grinding process to ensure the uniform and stable quality of glass film removal effect, avoid manual intervention and adjustment, and reduce the technical level of operators.
6.Energy saving by frequency conversion: All grinding head motors use 1-level energy-efficient permanent magnet synchronous grinding head motors with individual frequency conversion control. The no-load current is less than 50% of that of asynchronous motors. In addition, the machine has a real-time energy-saving mode.
7.Machine self-maintenance function: The lubrication method for the opening and closing guide rails and gear racks is intermittent lubrication during the origin return process when the machine is turned on.
Glass Double Edging Machine
Processing Size | Model | Processing size range |
| SSZM-G2518AC(P) | 300~2500mm | |
| SSZM-G3018AC(P) | 300~3000mm | |
| SSZM-G3718AC(P) | 300~3700mm | |
| SSZM-G4518AC(P) | 330~4500mm | |
| SSZM-G5018AC(P) | 450~5000mm | |
| SSZM-G6018AC(P) | 450~6000mm | |
| Glass Thickness | 3~25mm | |
| Opening and closing speed | 25m/min | |
| Transmission Speed | Maximum speed without load:25m/min | Load speed range:0~20m/min |
| Chamfering Size | 1~3mm | |
| Max Glass Removal of Bottom Edge | 5mm | |
| Glass Diagonal Error | ≤±0.5mm/m | |
| Chamfer Width Error | ≤±0.2mm/m | |
| Glass Parallel Error | ≤±0.2mm/m | |
| Power | 380V/50Hz | |
| Pneumatic Working Pressure | 0.5~0.8Mpa | |
| Installed Power | ≈62KW/Single Machine | |
| Working Table Height | 900±30 mm | |
The whole machine is controlled by PLC, and can be equipped with automatic code scanning or receiving glass dimensions given by the front-end equipment to achieve automatic adjustment of any size without manual input.
2.Main structure and process of the machine
The machine base and the main body of the box are made of 12mm thick-walled square tubes. Thick steel plates are added to the mounting surface for welding and artificial aging treatment is performed to eliminate welding stress and prevent deformation during use.
3.Opening and closing part
The opening and closing part of the machine uses Taiwan brand grinding grade (6-level precision) helical gear rack transmission, and is equipped with a high-precision brake system to improve the rigidity of the machine when grinding glass edges.
4.Transmission part
The main transmission part of the machine adopts dual servo motors and hyperbolic gear reducers for transmission. Compared with traditional edge grinding machines, it is more efficient and energy-saving, has high synchronization, and is easy to repair and maintain.
5.Motor Slide Plate
All grinding head slides of the machine are high-precision double V-shaped slides, which have the characteristics of flexible adjustment, high precision and small vibration, thus improving the edge grinding quality of the machine.
6. Lifting part
The lifting and lowering of the upper pressure beam and the upper 45° chamfer are both controlled by servo motors, which have high control accuracy and fast and accurate positioning, solving the shortcomings of traditional edge grinding machines that require frequent corrections due to inaccurate lifting dimensions.
Grinding wheel configuration
| Serial number | Grinding wheel use | Motor power and speed | Grinding wheel configuration | Feed Method | |||
| Type | Spec | diameter(mm) | Brand | ||||
| 1# | Bottom edge rough grinding | 4KW 5500RPM | Diamond wheel | 120 | ∅175 | Seven Star Stone | Servo Feed |
| 2# | Bottom edge rough grinding | 4KW 5500RPM | Diamond wheel | 140 | ∅175 | Seven Star Stone | Servo Feed |
| 3# | Upper chamfer rough grinding | 2.2KW 4500RPM | Resin wheel | 240 | ∅150 | WeiFeng | Servo Feed |
| 4# | Upper chamfer polishing | 2.2KW 3000RPM | Polishing wheel | 10S40 | ∅150 | Domestic | Servo Feed |
| 5# | Rough grinding of lower chamfer | 2.2KW 4500RPM | Resin wheel | 240 | ∅150 | WeiFeng | Servo Feed |
| 6# | Lower chamfer polishing | 2.2KW 3000RPM | Polishing wheel | 10S40 | ∅150 | Domestic | Servo Feed |
| 7# | Bottom edge fine grinding | 3KW 5500RPM | Resin wheel | 240 | ∅175 | WeiFeng | Servo Feed |
| 8# | Bottom edge polishing | 2.2KW 3000RPM | Polishing wheel | 10S40 | ∅150 | Italy | Servo Feed |
| 9# | Film removal /polishing (choose one) | 2.2KW 3000RPM | Film removal wheel/Polishing wheel(choose one) | Film removal wheel /10S60 | ∅150 | Domestic | Servo Feed |
Detection size range | Model | Width direction detection size (1# size) | Long direction detection size (2# size) |
| SJCT3025 | 300~3000mm | 300~2500mm | |
| SJCT3725 | 300~3700mm | 300~2500mm | |
| SJCT4525 | 330~4500mm | 300~2500mm | |
| SJCT4530 | 330~4500mm | 300~3000mm | |
| SJCT5030 | 450~5000mm | 300~3000mm | |
| SJCT6030 | 450~6000mm | 300~3000mm | |
| Detecting Glass Thickness | 0~25mm | ||
| Measuring head moving speed | 70m/min | ||
| Transmission speed | 1~40m/min | ||
| Length and width detection accuracy | ±0.1mm | ||
| Thickness detection accuracy | ±0.2mm/m | ||
| Detection cycle | <= 12S | ||
| Power | 380V/50Hz | ||
| Pneumatic working pressure | 0.5~0.8Mpa | ||
| Installed power | ≈5.3KW | ||
| Working Table Height | 900±30 mm | ||
Steering size range | Model | Minimum steering size | Maximum steering size |
| SLZT3025 | 300*300mm | 3000*2500mm | |
| SLZT3725 | 300*300mm | 3700*2500mm | |
| SLZT4525 | 330*300mm | 4500*2500mm | |
| SLZT4530 | 330*300mm | 4500*3000mm | |
| SLZT5030 | 450*300mm | 5000*3000mm | |
| SLZT6030 | 450*300mm | 6000*3000mm | |
| Conveyed glass thickness | 3~25mm | ||
| Transmission speed | 1~40m/min | ||
| Power | 380V/50Hz | ||
| Pneumatic Working Pressure | 0.5~0.8Mpa | ||
| Installed Power | ≈4.5KW | ||
| Working Table Height | 900±30 mm | ||
B-section roller conveyor (conveying roller shaft is 304 stainless steel)
SINGIP specializes in a diverse range of industrial machinery. Our main products include various processing lines and single - unit machines, designed for efficiency and precision. Whether it's large - scale production lines or compact equipment, each product reflects our commitment to quality and innovation in the manufacturing field.
https://singip-glass.en.made-in-china.com/product-list-1.html
Welcome to SINGIP--A Professional Glass Technology Enterprise.
Providing the highest quality Glass Cold-processing Machinery, Consulting and technical support services since 2012.
The SINGIP is created by couple of person who are full of experience in glass industry. We specialize in providing glass machinery and consulting services to the glass industry worldwide.
SINGIP brings you an affordable solution for glass cold processing. We offer you high quality low cost solutions for glass edging, beveling, drilling, washing, sandblasting, and much more.You can find out more about us and our equipment inside our web site. We welcome you to search our product list and, most important of all, look forward to making you one of our future satisfied and repeat customer.
The SINGIP workshop is a busy place. It's equipped with diverse machines and organized neatly, storing packaged components and large metal structures. The precision parts and advanced equipment showcase our focus on quality and efficient production for glass - processing machinery.
SINGIP's certificates reflect our professionalism. Our CE - marked machinery certificates, ensuring electromagnetic compatibility and low - voltage compliance, show strict international - standard adherence. A prestigious trophy highlights our industry - recognized excellence, solidifying our status as a trusted glass - processing machinery provider.
SINGIP actively participates in exhibitions. Our booths, distinct with the SINGIP logo, are well - designed and attract many visitors. At these events, we showcase our advanced glass machinery. People are not only observing the equipment but also engaging in in - depth discussions with our staff, demonstrating strong interest in our products.
SINGIP's customers are global and diverse, from small - business owners to large - enterprise managers in the glass - processing industry. Our products and services have earned their trust. These images show satisfied customers working with our team, valuing our high - quality solutions and personalized service.
Q: Do you provide on-site installation and training?
A: Yes, we offer global installation services and operator training programs.
Q: How are your glass machines packaged?
A: To be packed in containers suitable for long distance ocean transportation.
Our glass machine packaging is filled with shock-absorbing materials such as pearl cotton and film to protect the machine from damage during transportation. Wooden box packaging can be upgraded as an option.
Q: How do you ensure the stability of long - term operation of glass machines?
A: We conduct rigorous endurance tests on all glass machines before they leave the factory. During the production process, we select high - quality components and materials with excellent durability.
Q. Can I custom order machinery?
A. Yes, most of our machinery can be custom configured to match specific needs.
Q. Where can I get spare parts for the machinery?
A. SINGIP stocks a full array of parts for all of the machinery.
Q. How long is the warranty period of the machine?
A.12 months (All the wear and tear parts are excluded).
