Audited Supplier
CLW65879TYDF5
Complete Vehicle
a Years
Recycling
ISO9000
10001-15000L
Euro 4
Automatic
Gasoline
4×2
Dongfeng
Micro
Dump
New
CLW
Complete Vehicle
15 square
China
2801100000
Product Description
Model introduction:
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. It can be equipped with a variety of rear-hanging bucket flipping mechanism or garbage bucket flipping mechanism.
Main technical parameters:
Chassis configuration:
Isuzu series sanitation vehicle special chassis, 3360MM wheelbase, Isuzu engine, Wanliyang 6-speed gearbox, 245 tubeless tire, 192mm double-layer beam, 2.7T/5.5T Dana front and rear axles, exhaust brake, air brake, original air conditioning, electric glass, central control-remote control, air conditioning, nationwide warranty.
Top-loading configuration table:
Product highlights:
Precautions:
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
If the garbage heap is too high, it will affect the pressure filling of garbage and the uniform distribution of garbage in the garbage bin.
Three, When pressing and filling, you should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
Stop the operation, continue the operation after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler must not enter normal driving before it falls and is locked.
Our company makes the following commitments to the after-sales service of the vehicle:
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. It can be equipped with a variety of rear-hanging bucket flipping mechanism or garbage bucket flipping mechanism.
Main technical parameters:
| [Main Technical Parameters] | |||
| Product trademark | Cheng Liwei brand | Announcement batch | 369 |
| Product name | CLW5070ZYSQ6 type compressed garbage truck | Product number | CBE369E4305. |
| Total mass (Kg) | 7300 | Tank volume (m3) | |
| Rated Load Mass (Kg) | 1870 | Dimensions (mm) | 6650×2050×2750 |
| Prepared mass (Kg) | 5300 | Cargo compartment size (mm) | ×× |
| The number of passengers in the cab (persons) | 2 | Load mass utilization coefficient | |
| Approach angle/departure angle (°) | 15/24 | Front suspension/rear suspension (mm) | .1015/2045,1015/1965 |
| Number of axes | 2 | Wheelbase (mm) | 3360 |
| Shaft load (Kg) | 2580/4720. | Maximum speed (Km/h) | 95 |
| Other | 1. The correspondence between the rear suspension and rear extension of the car is (mm): 2045/230, 1965/310. Two. The left and right side protection materials are made of Q235B carbon steel, and the connection method is welded. The rear lower protection is replaced by a special device, and the back lower protection is at ground height (mm): 320.3. ABS and its controller model/production enterprise correspondence are: APG3550500A/Zhejiang Asia-Pacific Electromechanical Co., Ltd., CM4YL/Guangzhou Ruikemi Automotive Electronics Co., Ltd., CM4XL-4S/4M/Guangzhou Ruilikemi Automotive Electronics Co., Ltd. 4. The corresponding relationship between the engine model and the fuel consumption value is (L/100km): 4KH1CN6LB/16.12. 5. Special device: hydraulic mechanism and filler, mainly used for the transportation of urban sanitation garbage. 6. The cab is optionally equipped with the chassis. 7. This model can be optionally equipped with ETC on-board device. Eight. Optional rear flip style. Nine. Optional oil tank, multi-way valve and electronic control box layout position. | ||
| [Technical parameters of chassis] | |||
| .Chassis model | QL1070BUHACY. | Name of the chassis | Cargo vehicle chassis (Class II) |
| Trademark name | Isuzu brand | Manufacturing enterprise | Automobile Co., Ltd. |
| Dimensions (mm) | 5900×1880×2200 | Number of tires | 6 |
| Approach angle/departure angle (°) | 16/24 | Tire specifications | .7.00R16LT 14PR, 7.00-16LT 14PR |
| The number of steel plate springs | 8/6 plus 5 | Front wheelbase (mm) | 1504 |
| Types of fuel | Diesel oil | Rear wheelbase (mm) | 1425 |
| Emission standards | GB17691-2018 Country VI | ||
| Engine model | Engine manufacturers | Discharge (ml) | .Power (Kw) |
| 4KH1CN6LB 4KH1N6MD. 4KB1-TCG60. | Isuzu (China) Engine Co., Ltd. Isuzu (China) Engine Co., Ltd. Isuzu (China) Engine Co., Ltd. | 2999 2999 2499 | 88 103 96 |
Isuzu series sanitation vehicle special chassis, 3360MM wheelbase, Isuzu engine, Wanliyang 6-speed gearbox, 245 tubeless tire, 192mm double-layer beam, 2.7T/5.5T Dana front and rear axles, exhaust brake, air brake, original air conditioning, electric glass, central control-remote control, air conditioning, nationwide warranty.
Top-loading configuration table:
| Order | .Name | Specifications and models |
| 1 | Chassis name/model | ISUZU Series |
| 2 | Wheelbase (mm) | 3360 |
| Three | The volume of the box is m3 | 7 |
| 4 | Box thickness mm | Wugang Q345 low-alloy manganese steel (side four and bottom five) flipping mechanism scraper, arc bottom plate, slide adopts Q710 high-strength plate |
| 5 | Sewage tank | There is a sewage sink on the front of the large box, and an integrated sewage tank at the bottom of the filler. |
| 6 | Box shape | Arc, the side plate is the whole plate for one-time molding, no welding |
| 7 | Hydraulic cylinder | Hypris |
| 8 | Oil pump | Changyuan |
| 9 | Multi-way valve | Zhongmei, Yangzhou, Jiangsu Province |
| Ten | Hydraulic oil pipe | Bonway hydraulic oil pipe (high-density double-layer 24Mpa) |
| 11 | System rated pressure | 18 MPa |
| 12 | Compression ratio | ≥0.85 |
| 13 | Consolidation method | Two-way peristaltic compression |
| 14 | Control system | German Siemens PLC and German photoelectric sensors |
| 15 | Loading single cycle time | ≤24 s |
| 16 | .Time to dump garbage | ≤35 s |
| 17 | Control method | All-in-one independent operation of the handsplet (standard remote control) |
| 18 | Key component structure | Reinforced with cast steel parts |
| 19 | Shovel and skateboard slider | Highly wear-resistant nylon |
| 20 | The design of the whole vehicle | Use SW three-dimensional software to simulate |
| 21 | Back-hanging bucket method | .Standard configuration: rear-turning barrel type (can hang the national standard 240 plastic barrel or iron barrel or triangle bucket) / optional: fully sealed bucket, swing arm flip |
| 22 | Body color/text | Body color and text painting can be customized according to customer requirements. |
| 23 | Attachment | Profile light, side light, work light |
- Larger loading capacity: the same volume of the box increases by 5% per square capacity compared with the previous generation (more than 7 barrels of 240L trash cans).
- Fault-prone position: The force position of the scraper skateboard is generally prone to deformation, resulting in unstable work. The new generation of products developed by our company has innovated in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
- .Working time: The loading time of the new generation of compressed garbage trucks produced by our company is within 25 seconds in the idle state, and the loading time is the longest time used by the vehicle, so it is economical fuel, reduces costs, and improves work efficiency.
- Wear parts: The scraper is the largest force on the vehicle, and the slide is the most worn. Our company's slide adopts a high-strength Q710 of more than 8mm. The middle of the scraper is strengthened separately, which has greater bearing capacity and stronger wear resistance, greatly increasing the service life.
- Oil pump: Oil pump is the main component of the compression vehicle. Our company's new generation oil pump is customized for oil pump factory, with stable performance and extremely low failure rate.
Precautions:
- When operating, irrelevant personnel should be avoided from approaching the vehicle, especially the rear of the vehicle.
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
If the garbage heap is too high, it will affect the pressure filling of garbage and the uniform distribution of garbage in the garbage bin.
Three, When pressing and filling, you should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
Stop the operation, continue the operation after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler must not enter normal driving before it falls and is locked.
Our company makes the following commitments to the after-sales service of the vehicle:
| After-sales service commitment | ||
| 1 | Technical training program | The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user for use, mainly from the driver's operation of the hydraulic system and special equipment to familiarize himself with the basic principles of the vehicle and the ability to deal with general faults. |
| 2 | After-sales service method | The maintenance of the chassis part can be solved at the chassis manufacturer service station closest to the user's use. For the distribution location, technical strength and contact information, please refer to the chassis Maintenance Manual for details. For the maintenance of the special device part, you can use the contact information of telephone and fax. We will give a processing plan within 2 hours after receiving the user's call, and if necessary, we will send professional maintenance personnel to the place of use within 24-48 hours to solve the problem. |
| Three | Free maintenance plan | The "three-warrantee" period of the equipment provided by the supplier is one year or 30,000km. During the "three-warrantee" period, the free maintenance of the chassis part is carried out at the Dongfeng Automobile Technical Service Station where the user is located, and the free maintenance of the special device part is carried out by the supplier to send professional and technical personnel. In case of quality failure caused by illegal operation or improper use, accidents, man-made damage, etc., the supplier will provide timely maintenance services, and the maintenance cost shall be borne by the user. |
| 4 | Supply and price of accessories after the free maintenance period | After the free maintenance period (the "three's" period)After), if the equipment fails, the accessories need to be replaced. The chassis part can be carried out at the chassis manufacturer's service station. The special device part is directly supplied by us. The price of the accessories is supplied to the user at the cost price, and the maintenance period is lifetime. |
| 5 | Agree to do something | If you buy our company's special car, the "three-guarante" period will be implemented for one year or drive 30,000 km, lifelong maintenance, and after-sales service will be in place within 24-48 hours. |
| 6 | Service purpose and objectives | Fast, decisive, accurate, thoughtful and thorough; the service quality wins user satisfaction. |
