Audited Supplier
| Appearance | Light Yellow |
| Density | 1.04 g/cm3(20ºC/68ºF) |
| Flash Point | ≥200ºC/392ºF |
| Kinematic Viscosity | 15.6 mm2/s(40ºC/104ºF) |
| Average Molecular Weight | 270 |
| Expansion Coefficient | 8.6 x 10-4 1/ºC |
| Pour Point | < -20ºC/-4ºF |
| Average Boiling Point | 390ºC/734ºF |
| Lgnition temperature | 459ºC/858.2ºF |
| Temperature | Vapor Pressure | Specific Heat | Thermal Conductivity | Density | Viscosity | Kinematic Viscosity | |
| ºC | ºF | kPa | KJ/Kg·K | W/m·K | kg/m3 | mPa·s | mm2/s |
| -20 | -4 | ------ | 1.427 | 0.136 | 1073 | 1619 | 1509 |
| 0 | 32 | ------ | 1.494 | 0.135 | 1059 | 203 | 192 |
| 20 | 68 | ------ | 1.561 | 0.134 | 1045 | 49.3 | 47.2 |
| 40 | 104 | ------ | 1.632 | 0.131 | 1032 | 18.1 | 15.6 |
| 60 | 140 | ------ | 1.703 | 0.129 | 1018 | 8.58 | 8.43 |
| 80 | 176 | ------ | 1.770 | 0.127 | 1004 | 4.83 | 4.81 |
| 100 | 212 | ------ | 1.841 | 0.124 | 990 | 3.06 | 3.09 |
| 120 | 248 | ------ | 1.912 | 0.122 | 976 | 2.10 | 2.15 |
| 140 | 284 | ------ | 1.996 | 0.120 | 962 | 1.53 | 1.60 |
| 160 | 320 | ------ | 2.050 | 0.117 | 948 | 1.17 | 1.23 |
| 180 | 356 | 0.2 | 2.113 | 0.116 | 936 | 0.93 | 0.99 |
| 200 | 392 | 0.4 | 2.176 | 0.114 | 920 | 0.76 | 0.82 |
| 220 | 428 | 0.8 | 2.247 | 0.112 | 906 | 0.63 | 0.70 |
| 240 | 464 | 1.8 | 2.314 | 0.109 | 892 | 0.54 | 0.61 |
| 260 | 500 | 3.4 | 2.385 | 0.107 | 878 | 0.47 | 0.54 |
| 280 | 536 | 6.4 | 2.448 | 0.105 | 865 | 0.41 | 0.48 |
| 300 | 572 | 11.5 | 2.519 | 0.102 | 852 | 0.37 | 0.44 |
| 320 | 608 | 19.7 | 2.586 | 0.100 | 838 | 0.33 | 0.40 |
| 340 | 644 | 32.7 | 2.648 | 0.098 | 824 | 0.31 | 0.37 |
| 360 | 680 | 51.6 | 2.720 | 0.095 | 810 | 0.28 | 0.35 |
Dibenzyl toluene
Product Name: DBT Heat Transfer Fluid
CAS NO.: 26898-17-9
JINTHERM 602 is a high-performance synthetic, organic heat-transfer medium for use in the liquid phase in closed, forced circulation heat-transfer systems. It can be used below 370ºC/698ºF(its max film temperature) in the liquid phase circulation system (330ºC/626ºF is recommended as the max using temperature under normal pressure).
JINTHERM 602 is most suitable for indirect heating of reactors, polymerization vessels and distillation columns, of processing machines and driers, and heat ex-changers in process plants and systems for heat recovery. JINTHERM 602 is also suitable for cooling systems.
JINTHERM 602 circuits are advantageously operated using an inert gas back pressure of less than 100 mbar at the expansion vessel. Nitrogen has proven to be a suitable inert gas. Inert gas coverage can be used to protect against oxidation boiling at high temperatures and moisture absorption at low temperatures. Antioxidants are unstable at operating temperatures above 200°C/392ºF and are ineffective even after short operating times.
JINTHERM 602 is thermally stable up to very high operating temperatures. The JINTHERM 602 charge can be used for several years without significant changes. At very high temperatures, low- boiling and high-boiling decomposition products may be formed. Their degree of formation rises with increasing operating temperatures. The decomposition products remain completely dissolved in the JINTHERM 602 charge.
To check the operating condition of heat-transfer systems, quality controls should be carried out at appropriate intervals on representative samples from the main stream of the circuit. Scope of testing and sampling must be individually matched to the charge volume and the operating temperature of the heat-transfer plant.
Shelf life and storage:
Store in a cool, dry place under the condition of keeping the original package sealed.
The product must be kept tightly sealed during storage. If it is not sealed and stored, or the packaging container with poor sealing is replaced, the product may deteriorate.
JIANGXI TIANYI SPECIAL OIL Co., Ltd. Was established in 2012 with a registered capital of 30 million yuan and total assets of 48 million yuan. It is located in Zibu Chemical Industrial Park, Fengchao Industrial Park, Wannian County, Shangrao City, Jiangxi Province. The company integrates research and development, production, sales, and service, and is a national high-tech enterprise. The main products include synthetic high-temperature thermal oil, power capacitor impregnating agent and pressure-sensitive carbon free copy paper dye solvent oil.
1. ARE YOU A MANUFACTORY OR TRADE COMPANY?
We are manufacturer, and with 24 years' experience on chemical industry.
2. DO YOU PROVIDE FREE SAMPLES ?
Yes, we can offer free sample 500g, but do not bear the cost of freignt.
3. WHAT IS YOUR TERMS OF DELIVERY?
EXW/FOB/CIF/CFR/DP
4. DO YOU TEST ALL YOUR GOODS BEFORE DELIVERY ?
Yes, we have 100% test before delivery and can provide COA.
5. HOW CAN I GET THE PRICE ?
we need to confirm which product you need first, the quantity and other requirements.
6. CAN YOU GIVE ME A DISCOUNT PRICE ?
yes, it depends on your quantity.
7. IS IT POSSIBLE TO CUSTOM THE LABELS WITH MY OWN DESIGN ?
yes, you should send us your artworks, then you can get what you want.
8. HOW CAN I RELEASE THE PAYMENT TO YOU?
we can receive your payment by TT,L/C,D/P,D/A and Western Union is strongly recommended for small amount.
9. WHICH PORT CAN YOU SHIP THE CARGO ?
SHANGHAI, NINGBO,XIAMEN,SHENZHEN,or others.
10. HOW DO YOU TREAT QUALITY COMPLAINT ?
First of all, our quality control will reduce the quality problems to near zero. If there is a real quality problem caused by us, we will send you free goods for replacement and refund your loss.
