Kanpor Brushless Three Phase AC Synchronous Alternator Stf164

1. GENERATOR DATA                              

Voltage Available: 

50Hz: 380-400-415V/220-230-240V;

60Hz: 220-380-416-440-480V/110-208-220-240V

Any special voltage is also available as client's request

Prime Power: 

Comply with GB/T2820-97(eqv.ISO8528).

Genset can run unlimitedly under certain power range.

One hour 10% over load in every 12 running hours is allowed;

Standby Power:

standby power is the limit value of maximum output for emergency use.

It is off-oil power,overloading is prohibited

2. POWER RANGE

3. SPECIFICATION



4. THE ADVANTAGE OF OUR MATERIALS 

1. The winding enamelled wire is 100% copper(20-1000kva)

2.The silicon steel sheet we use is the products of Shanghai Baoshan Steel Co.,Ltd,which is the biggest and most famous manufacture of steel.And its advantage is its magnetic flux is large and its iron loss is smal.

3.The main frame of the alternator and lead box are made of steel,the end cover is made of high strength cast iron.

4.All the components of our factory,the stator,rotor and excitation will be dippinglacquer twice.

5.All the rotors and stators of our company use the rope of best nylon to tie.We promise the security of our products,the phenomenon of ribbon burst will never happen.

6.All the rotors should be tested by dynamic balance of Germany to go on test of balance. All the products of our factory should be tested by specialized Test Room.

5. TERMINAL AND TERMINAL BOX

The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels

Engine Adaptor and Coupling Disc

SY-A Series generators have two kinds construction.

SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available.

SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available.

Voltage Regulation:

Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR

Interference factor

-THF(BS EN60034-1)<2%

-TIF(NEMA MG1-22)<50%

Brushless system and AVR of high quality ensure radio interference very little.


6.   PRODUCT FEATURES

1) Rated output: 10 to 1000kva 
2) Rated frequency: 50/60Hz 
3) Rated speed: 1500/1800rpm 
4) Rated voltage: 210-440V
5) 3-phase 4-wire 
6) Protection: IP21 or IP22 
7) Insulation: class F/H 
8) Standard: international electrician committee command standard IEC34, 
9) Engine can be connected with steel or flexible materials standardization organization: command 
10) Steel frame: cast-iron coverstandard, ISO8528 NEMA standardinternational 
11) Excellent silicone steel chip 
12) Imported bearings. You could choose one bearing or two bearings