Audited Supplier
KDN Series
Support
1 Year
Nitrogen Analyzer
Infrared Analysis
Digital
Grain, Feed, Food, Dairy Products, Beverages, Soil
50±0.5Hz
Semi-automatic
Storage
20 Kg
AC220V±22V
Customized
0.1mgn~200mgn (Mg Nitrogen)
5~15 Minutes/Sample (Depending on The Amount of SA
3 L/Min
>=99%
QT
Customized
1000W
China
9031809090
Product Description
★ KDN Series protein analyzer adopts microcomputer for processing control.
★ Automatic distillation control, auto water addition, automatic water level control, and automatic water stop.
★ Various safety protections: digestive tube safety door device, steam generator water shortage alarm, water level detection failure alarm.
★ The shell of the crude protein analyzer is made of special plastic-sprayed steel plate, and the working area is made of ABS anti-corrosion panel, which is resistant to chemical reagent corrosion and mechanical damage to the surface, and is resistant to acid and alkali.
★ Water level detection, low water level alarm, instrument control system failure can automatically cut off the power.
★ The instrument adopts tap water source, which has wide adaptability and low requirements for experiments.
1. ABS panel
2. Digestion tube
3. Hard PTEE
4. Synthetic glass cover
5. Digestion tube tray
6. Erlenmeyer flask tray
7. Erlenmeyer flask
8. Ammonia gas
circumfluence glass nozzle
9. Distillation button
10. Alkali addition button
11. Power
2. Digestion tube
3. Hard PTEE
4. Synthetic glass cover
5. Digestion tube tray
6. Erlenmeyer flask tray
7. Erlenmeyer flask
8. Ammonia gas
circumfluence glass nozzle
9. Distillation button
10. Alkali addition button
11. Power
★ The digestion furnace (numeric display model) is controlled by temperature control meter. It adopts infrared radiation heating. Insert the sample into the heating furnace to get the best heating effect.
★ Through the drainpipe and the air-bleed three-way, poisonous gases (e.g. SO2) emitted from the digestion tube could be taken to the cloaca by water (the gases could also be recycled by vacuum pump and recycle bottle) which could control the emitting of poisonous gases and save the installation of ventilated case. Samples could be digested thoroughly in about 40-90 minutes (according to the amount of nitrogen).
Please note.The appearance and packaging of the product are continuously upgrading.
| The protein analyzer can measure varieties | Foodstuff, feedstuff, foods, dairy products, drink, soil, water, medicine, precipitate, chemical. |
| Working method | Semi-automatic |
| Measure quantity | Digest 4~20 pieces of tubes at the same time, adopt single distillation. |
| Measuring range | 0.1mgN~200mgN (nitrogen content 0.1%-99%) |
| Recovery rate | ≥99% (relative error, including digestion process) |
| Repetition rate | Relative standard deviation<±1% |
| Working hours | Digestion time: 40~90 minutes, distillation time: 5~15 minutes. (According to different samples, time required is also different.) |
| Water intake method | Tap water and distilled water, which can be used in a wide range of areas |
| Sample amount | Solid 0.20g~2.00g, semi-fixed 2.00g~5.00g, liquid 10.00ml~25.00ml |
| Distillation speed | 5~15 minutes/sample (depending on the amount of sample) |
| Cooling water consumption | Digestion: 5L/min Distillation: 3L/min |
| Water supply | Water temperature is less than 20ºC |
| Digestion tube capacity | 300ml |
| Power supply | AC220V/50Hz |
| Power | Distillation: 1000W Digestion: 4 holes--1000W, 8 holes--1500W, 20 holes--2000W |
| Dimensions of measuring instrument | 380×320×670mm |
| Weight | 20 Kg |
Attention.This instrument is a distillation unit; it should be used together with digestive furnace. Models of digestive furnace are: KDN-04(4-hole), KND-08(8-hole), KDN-20(20-hole), For more details, please contact us.
Note: The ZDDN - II model can also choose manual mode.
Q1. How can I choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
Q2. How can I pay?
We accept many payment term, such as T/T, Western Union…
Q3. When I receive it after pay?
Normal models can be delivered with 5-7days, please contact us to check transport time to your address.
Q4. What should I do if I do not know how to use?
Manual user will be sent together, you can also contact us with more technological support.
Q5. What should I do if some parts broken?
We do standard export package and 1 year warranty except wear parts.
Q2. How can I pay?
We accept many payment term, such as T/T, Western Union…
Q3. When I receive it after pay?
Normal models can be delivered with 5-7days, please contact us to check transport time to your address.
Q4. What should I do if I do not know how to use?
Manual user will be sent together, you can also contact us with more technological support.
Q5. What should I do if some parts broken?
We do standard export package and 1 year warranty except wear parts.
