Audited Supplier
Precision Agriculture tractor autosteer Wheel motor kits for John Deere autosteer compatible motor,Keya 4nd Generation Electric Steering Motor.
Central to this groundbreaking system is its core component: a direct-drive motor that exemplifies engineering excellence. Optimized for peak performance, the motor operates at a rated speed of 100rpm, ensuring seamless compatibility with a wide range of agricultural machinery. Its intelligent controller supports both RS232 and CAN communication protocols, delivering enhanced connectivity and precise control.
Built for versatility, the motor boasts dual voltage adaptability (12V/24V) and generates a rated torque of 7N.m, with a peak torque capacity of 16N.m. These robust specifications ensure exceptional performance across diverse agricultural scenarios, from precision row-crop operations to demanding field conditions. The Keya Electric Steering Wheel redefines agricultural steering technology, combining unmatched precision, reliability, and adaptability in a single, innovative solution.
Perfect for use with the AgOpen navigation system
Keya® 4th Gen Electric Steering Actuator - Revolutionizing Auto-Guidance Systems
5 Major Technological Breakthroughs
✓ MIL-SPEC Connectivity: DEUTSCH DTO4-8P (Male) IP67 connector with 40% vibration resistance
✓ Dual-Protocol Interface: RS232 + CAN Bus online upgrade for universal compatibility
✓ Smart Calibration: Auto zero-position search cuts 60% installation time
✓ Digital Traceability: Unique S/N display enables full lifecycle quality control
✓ OTA Updates: CAN Boot firmware upgrade reduces 50% maintenance cost
Power supply
1.Rated working power: 12VDC-24VDC (power supply range 9 ~ 28VDC)
2.The power source should provide instantaneous current overload capability of 2 times continuous current.
Working environment
1.Operating temperature: -25~55°C, if you need lower temperature, please advise, we accept customized.
Storage temperature: -35~65°C.
2.Humidity: 5%--90%RH, condensation (25°C)
3.Protection level: IP55 (if you need IP65, we accept customized.)
4.Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The insulation resistance is 20 MΩ or more.
5.Three-proof requirements: Meet the requirements of three defenses (dust-proof, moisture proof, salt spray proof).
6.Vibration requirements: frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g.
Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.
Horizontal, vertical, and longitudinal directions are 30mins in each direction.
7.Cooling method: natural cooling
8.navigation system:AgOpen
| Number | Interface defintion | Recommended wiring harness type |
| 1 | IN+ | 2.5mm2 |
| 2 | IN- | 2.5mm2 |
| 3 | TX: RS232-TX | 0.5mm2 |
| 4 | TX: RS232-RX | 0.5mm2 |
| 5 | GND: 0V | 0.5mm2 |
| 6 | CAN-H | 0.5mm2 |
| 7 | CAN-L | 0.5mm2 |
| 8 | SET | 0.5mm2 |
Steering wheel motor drawing-product drawing
What's in the package?1pc Autopilot motor with model KY173DD01005-08
1pc Connect cable+connector plug, IP67 rating
1pc Steering wheel, dia. 41cm, Symmetrical type
1pc Mounting Bracket (to support the motor)
1pkg screws for assembly
1set of RS232 to USB comm. cables for configuration software
1pc Spline/Adapter (See below table to choose right adapter for your tractor. If your tractor model is not mentioned in the table, please write to Eric) Note: If you need more splines for transferring the motor among tractors, please leave messages with us.
Jinan Keya Electron Science and Technology Co., Ltd, founded in 2003, has been trading in the research &development,manufacturing and sales of DC motor and control system for 20 years. The company set technology, talent, management and other resources advantages, to effectively integrate, has maintained a healthy, stable and rapid growth. The company has adopted ISO9001:2008 quality management system certification, products through the CE certification. More than 3000 large and medium-sized domestic equipment manufacturers designated as supporting products, and exported to more than 80 countries and regions, incl. US, UK, France, Austria, Germany, Netherland, Poland, Japan, South Korea, Thailand, India, Turkey and Brazil etc.
Certifications
product application
Vehicle-mounted automatic driving system: including satellite antenna, angle sensor, high-precision positioning terminal and driving controller, etc., forming an integrated system to realize automatic control of agricultural machinery. The electric teering wheel system produced and sold by our company belongs to the driving controller part.
The automatic driving system of agricultural machinery not only represents the transformation of agricultural mechanization to intelligence, but also is the core component of intelligent agriculture. Through highly accurate navigation and automatic control, it greatly improves the efficiency of agricultural production, reduces labor intensity, and indicates a new model of agricultural production in the future. With the continuous progress of technology and the deepening of industrialization, unmanned agricultural machinery will become an important driver of agricultural modernization.
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory | Help instal and use the product 24 hours online problem solving |
1.Q: What are your main products?
A: We produce various kinds of motor & controller, the main product is tractor autopilot motor for precision agriculture.2.Q: How long have you been in this field?
A: More than 20 years in this field.
3.Q: Do you have your own R&D team?
A: Yes. R&D is our core competitiveness, continuous innovation is just what we are seeking for all the time. Some of our engineers have more than 20years experience in the industry, and we also cooperate with colleges, scientific research institutions and large enterprises.
4.Q: How soon can you deliver the goods?
A: That depends on the exact model you order. For regular products, usually we will prepare some units in stock, we can deliver them within 3 working days.
5.Q: Can you make the product according to customer's requirements?
A: Yes, welcome costom-made products.
