Audited Supplier
KM6000
Professional Engineering Team
Available
Space Environment Simulation
in Seperated Parts
Sea Worthy Packing for Seperated Parts
ID. 6000mm
China
Product Description
Space Environment Simulator
Application:
To verify the adaptability and stability of the test equipment under high vacuum and low temperature condition.
Technical specification for Vacuum Vessel
| 1. Structural form | horizontal type |
| 2. Material | S30408 for shell, heads, flanges and internal parts; Q345B for reinforcing rib and skirt material |
| 3. Size of vacuum vessel | 6000mm(inner diameter) x 11000mm(straight barrel height) |
| 4. Total leakage rate | ≤4*10-6Pa.m3/s |
6. The Gate opening mechanism adopts the lateral and flat opening mode of gantry suspension crane
7. The Gate weight is 20 tons, the maximum outer diameter is φ6940mm, the lateral stroke is 7000mm, the axial stroke is less than 100mm
8. Gate side, axial drive are motor drive, axial movement with encoder
Thermal precipitator
| 1. Structure | Fin tube type |
| 2. Material | S30408+T2 |
| 3. Temperature Range | -196oC~+150oC |
| 4. Low operating temperature | 100k±5oC |
| 5. Temperature uniformity | ±5oC |
| 6. Size | 5600mm(inner diameter)×11000mm(straight barrel height) |
| 7. Total leakage rate | ≤5×10-6Pa.L/S |
| 8. Black paint half ring emissivity | ≥0.9 |
Nitrogen system
1. Medium: liquid nitrogen
2. Operating temperature ≤100k
3. Heat accumulation heat load 100kw
4. Realize open flow, empty tank cycle, one-way closed cycle, and can be switched freely
5. The heat sink of the gas-nitrogen system increased from 100k to 300k in 10 hours
Vacuum system
Equipped with vacuum pump, valve, pipe, instrument, etc
Monitoring system
Meet KM6000 control requirements
The Φ6000×11000 vacuum container cylinder is hoisted into place
KM6000 container in transit
Vibration meter for stress relief
KM6000 valve box
KM6000 nitrogen system pipeline
Preparations for commissioning the KM6000
FAQ:
Q1: What's the advantage of your company?
A: Our company specializes in trading for more than 13 years. We know how to solve any kinds of emergency accident during trading to give you a high quality and safety services . Choose the most suitable manufacture to satisfy your requirements is our goal.
Q2: I do not have experience to purchase from China before. How to start my first order?
A: It is easy and simple. Please feel free to contact with us. Experienced team is ready to help you step by step.
Q3: Can I get some samples?
A: Yes, we're honored to offer you samples for quality check.
Q4:How to confirm the quality ?
A: Third party inspection is warmly welcome before shipment. We have cooperated with SGS,IEI, CCIC,TECHNICO,BV,FIDES,etc.If you require the previous release notice issued by them,we would like to send you before order.
Q5: Is it possible to know how is my product going on without visiting your company?
A: We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.
Q6: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always try to meet customers' requirement by adjusting workshop schedule.
Q7: What is your payment?
A: Normally, by T/T 30% down payment, 70% balance before shipment. 100% L/C at sight is also accepted by us. Besides, we have Kun Lun bank to receive Iranian payment.
