L Pg Body Shape Face Lifting Fat Removal Slimming Machine with Vacuum RF Body Slimming Machine RF Cavitation Body Sculpting Device Body Contouring

Price $4999.00 Compare
Min Order 1 Set
Shipping From Beijing, China
Popularity 297 people viewed
Quantity
+-
 

Beijing QM Medical Co., Ltd.

VIP   Audited Supplier 3 years
Profile Certified by SGS/BV
Model: iShape III+
Body Slimming Machine
Vacuum Roller RF Cavitation
Salon, Home, Clinic, Hospital
Non Portable
4
Body, Face, Eyes
Body Sculpting, Weight Loss, Skin Tightening
Pulse
0-36 Rpm
940nm
2 Years
Real Time Online
Max: 60j/Cm
4 Types
Avaliable
QM Medical
Aluminum Box
Body Slimming
China, Beijing
8543709990
Product Description

Model: iShape III+
2024 New Machine Body Shape Face Lifting Fat Removal Slimming Machine With Vacuum Rf Body Slimming Machine Body Slimming





 

Appications

1. Skin Tightening
2. Wrinkle Removal
3. Eyes' area treatments
4. lncrease skin elasticity
5. Fat and cellulite reduction
6. Face wrinkle removal & lifting
7. Warm vacuum cellulite massage
8. Body slimming, contouring & shaping
9. Promote cell metabolism, improveblood circulation




 

Working Principle

 
  • 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue;
  • The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect;
  • The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment.
 

Technology Introduction


Technology 1: Cavitation
40KHz Cavitation technology in itself means that the ultrasound causes the fat cells to vibrate so fast (high frequency) so vacuum bubbles are formed in the cell. As a consequence, the outer casing of the fat cells (the membrane) is "blown out" and the fat ends outside the cells. Outside of the membrane, the fat can be broken down to rapidly accessible energy, which is then taken up in the blood or transported by lymph nodes, after which they are either burned or stored in other fat cells elsewhere in the body.

Technology 2: Mechanical roller massage

The mechanical roller massage works profoundly on densified connective tissues. The mechanical massage rollers enhance the skin's cell-generating activity, resulting in thickened fat deposits being drained.

Technology 3: Vacuum massage

The vacuum massages lift, mold and massage the skin deep and on the surface. The massage also increases the blood circulation, which in turn leads to the release of fat from the fat cells. The massage further provides a tightening of the skin.


Technology 4: Bipolar RF(radio frequency)

Bipolar RF makes water molecules in the fat revolve with high speed to produce friction and shock, then triglyceride go out from fat. RF energy with 1-10M could get to 4-15mm skin depth, which makes every layer get heat evenly. The new collagen makes skin turn tighten. This Bipolar RF makes the reorganizing fat cells connect more closely, stimulate the collagen re-grow, avoiding flabby skin after slimming treatment.


Technology 5: 980nm infrared light

Infrared light (IR) has a direct and very positive effect on muscles and joints. IR increases the oxygenation in the cells and gives a warming effect, which leads to increase the production that relieves pain and stiffness in muscles and joints. IR also strengthens the elasticity of the connective tissue and increases lymph and blood circulation. When treating the skin in, for example, the face with IR, clogged pores are opened, gray and glossy skin gets a new and finer luster.

Technical Specifications

 

Technical SpecificationElectrical requirement90kPa -25kPa(68.4Hg -19Hg)
Relative value10kPa -75kPa(7.6Hg -57Hg)
Working Mode1-8s cyclical working
 High-frequency vibration working
Radio frequencyPower150W Max
FrequencyThree different frequencies
Penetration depthDeep/Middle/Light(Optional)
Output wayRollers of Handpiece No.1
 Electrode pieces of Handpiece No.2 & No.3
 Transducer of Handpiece No.4
CavitationPower60W Max
Frequency60kHz
Infrared lightPower40W rated of Handpiece No.1
 16W rated of Handpiece No.2
Wavelength850nm
OutputFocused by convex lens
RollerPower4W Max
Speed15RPM rated
Display screenMain machine10.4 inch touch screen
Handpiece No.1 & No.42.4 inch color display screen
Electrical requirementAC220V±10%,50Hz/AC110V±10%,60Hz

Before & After


 

Company Profile


                                               

Certifications

                                                                   

FAQ:
                                                                                                                    
 

1. Who is QM Medical?
QM Medical is located in the capital city of China-Beijing. We are a global professional manufacturer and supplier in aesthetic and medical equipments filed. We start to do this career since 2008,In past years, we have accumulated rich experience to provide the professional OEM/ODM services for numerous factories and trading companies in domestic market, while nowadays we aim to further expand to overseas market working to serve the varied and growing needs of the global customers around the world.

2. How can we guarantee quality?
Strictly pre-production sample before mass production;
Strictly Inspection before each shipment.


3. What can you buy from us?
- Diode Laser/IPL Hair Removal System
- Q-Switch Nd: YAG Laser System,
- Co2 Fractional Laser Therapy System
- Pico Laser Therapy System
- HIFU System
- Cryolipolysis Body Slimming System
- EMS body slimming System
- Body and Skin Analyser System


5. What services you can enjoy from us?
1) We not only provide the professional machines,but also the good after-sale service
2) OEM/ODM service are our specialty,you can customize the machine design,colors,software and logo,etc 
3) Different payment solution
4) Consignment delivery service to any countries



6. How long is the Delivery time?
3-7 working days after payment confirmation, if large quantity or OEM/ODM service, we will talk specially.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA