Audited Supplier
SG
Metal+NBR
Cylinder
Floating Seals
Temperature
L Shape
Standard, Nonstandard
Acceptable
Black
Floating Seals
3-7 Days
TYS
Transparent PP Bag
30-8000mm
Xiamen
4016931000
Product Description
Floating Seals
Floating oil seals are indispensable sealing elements in hydraulic systems and mechanical equipment. They effectively prevent oil leaks and the entry of external contaminants, ensuring the stable operation of the system. When selecting materials for floating oil seals, it is necessary to comprehensively consider factors such as wear resistance, corrosion resistance, and temperature resistance. Common manufacturing materials include high-chromium cast iron and alloy cast iron. The different characteristics of these materials directly impact the performance and lifespan of the seals.
Floating oil seals are indispensable sealing elements in hydraulic systems and mechanical equipment. They effectively prevent oil leaks and the entry of external contaminants, ensuring the stable operation of the system. When selecting materials for floating oil seals, it is necessary to comprehensively consider factors such as wear resistance, corrosion resistance, and temperature resistance. Common manufacturing materials include high-chromium cast iron and alloy cast iron. The different characteristics of these materials directly impact the performance and lifespan of the seals.
| Code | Fucntion | Limited Condition | ||
| Pressure (MPa) | Speed (m/s) | Temp. (ºC) | ||
| SPGO | Piston Seals (Double Acting) | 40 | 5 | -45ºC +200ºC |
| SPG | Piston Seals (Double Acting) | 35 | 1.5 | -30ºC +200ºC |
| SPGW | Piston Seals (Double Acting) | 50 | 1.5 | -45ºC +200ºC |
| GSD | Piston Seals (Single Acting) | 40 | 5 | -30ºC +200ºC |
| DAQ | Piston Seals (Double Acting) | 40 | 2 | -30ºC +200ºC |
| AQ5 | Piston Seals (Double Acting) | 40 | 2 | -30ºC +200ºC |
| DAS | Piston Seals (Double Acting) | 40 | 0.5 | -30ºC +100ºC |
| PG | Piston Seals (Double Acting) | 35 | 0.5 | -30ºC +100ºC |
| MPA | Rod Seals (Single Acting) | 40 | 0.5 | -45ºC +120ºC |
| MPB | Rod Seals (Single Acting) | 40 | 0.5 | -45ºC +120ºC |
| MPR | Rod Seals (Single Acting) | 40 | 0.5 | -45ºC +120ºC |
| MPS | Rod Seals (Single Acting) | 40 | 0.5 | -45ºC +120ºC |
| HBY | Rod Seals (Single Acting) | 40 | 0.5 | -30ºC +110ºC |
| HBTS | Rod Seals (Single Acting) | 40 | 3 | -30ºC +110ºC |
| GSJ | Rod Seals (Single Acting) | 40 | 3 | -30ºC +110ºC |
| GSI | Rod Seals (Double Acting) | 40 | 5 | -45ºC +200ºC |
| DH-5 | Dust Sels | 2 | -40ºC +110ºC | |
| DHS | Dust Sels | 2 | -40ºC +110ºC | |
| GSZ5 | Dust Sels | 5 | -40ºC +110ºC | |
| DKBI | Dust Sels | 3 | -30ºC +100ºC | |
| DKBZ | Dust Sels | 3 | -30ºC +100ºC | |
| RVA | Rod Var i Seals | 45 | 15 | -70ºC +260ºC |
| GRS | Rotary Rod Seals | 30 | 1 | -30ºC +200ºC |
| ROI | Rotary Rod Seals | 28 | 0.3 | -30ºC +100ºC |
| BRT | Rod Seal Backup rings | 1 | -45ºC +200ºC | |
| N4W | Piston Backup rings | 1 | -45ºC +120ºC | |
| KZT | Dust Rings | 5 | -45ºC +200ºC | |
| WR | Wear Rings | 1 | -45ºC +120ºC | |
| RYT | Guide Tape | 5 | -45ºC +200ºC | |
| Sealing Component Storage Guidelines and Recommend-ed Shelf Life | |
| Storage Recommendations: | |
| Stock Control | Follow the First- In-First-Out (FIFO) princip le |
| Optimal Temp. | Seals should be kept aw ay from heat sources like direct sunlight and heat-emitting objects . The maximum storage temperature is +32°C. Low temperatures w on't cause permanent damage to the seals but can make them brittle, leading to potential breakage if mishandled. Generally , the storage temperature for seals should not go below +10°C, and they should be brought to room temperature before installation. |
| Avoid strong light | Surfaces should be shielded from direct sunlight and artificial light sources to prevent exposure to ultraviolet radiation. |
| Moisture control | Special care should be taken during storage, and the ambient humidity should not exceed 65% . Some specific polyurethane seals that are sensitive to moisture should be stored in sealed containers |
| Keep away from oxygen and ozone | Ozone and oxygen are harmful to seals . Seals should be stored in sealed containers . Any equipment that generates sparks should be kept aw ay from the storage containers . |
| Keep away from | For seals to have a longer storage life, they should be kept aw ay from contaminants . The w arehouse should be kept clean. |
| Avoid distortion | Large seals should be stored flat instead of hanging, as prolonged hanging can cause distortion. Seals should not be placed on hooks , nails , or metal plates . |
| Recommended Shelf Life : | |
| Compounds | Shelf Life |
| FEPM | 7 Years |
| EP,EPR,EPDM | 7 Years |
| FKM | 7 Years |
| NBR,HNBR,XNBR | 7 Years |
| AU or EU | 10 Years |
| TPCE | 10 Years |
| PTFE | Unlimited |
