Audited Supplier
L3 DIN-Rail Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 1G/10G SFP+ Managed Ethernet Switch
Introducing the L3 8G+4x10G SFP+ Managed DIN Rail Industrial Ethernet Switch by Shenzhen UTP Fiber Technology Co., Ltd. This industrial switch offers full-duplex and half-duplex transmission modes, a transmission rate of 10/100/1000Mbps, and is designed for rugged environments. With 30W PoE support, it is perfect for industrial applications.
Overview
UF-MIES4X8GP-SFP Series is an industrial Managed switch with 8-Port 10/100/1000BASE-T 802.3at PoE+ and 4-Port 1G/10G SFP+. It supports Layer 3 IP routing in a DIN Rail Mount case. With a 4 x 10Gbps uplink, the UF-MIES4X8GP-SFP allows operators to deal with many thousands of data in a secure topology connected to industrial backbones or high-capacity servers. Modernizing the industrial LAN dramatically allows it to meet ever-increasing bandwidth demands. With dual power input design, UF-MIES4X8GP-SFP can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 80°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments.
Features
- 8x10/100/1000Base-T PoE+ ports, 4x1G/10G SFP+ ports
- Compliant with IEEE802.3af/at PoE
- Layer 3 Model support OSPFv2, RIPv2, Static Route
- Support both IPv4/IPv6 applications
- LLDP, LLDP-MED protocol suitable for IIoT Applications
- Support IEEE802.3az energy efficient Ethernet technology, 8K MAC address table
- Electric 8KV surge protection
- Power input polarity protection design, no worry about wrong operation
- Aluminum case, no fan design
- Installation method: DIN Rail/Wall mounting
Application
The UF-MIES4X8GP-SFP Series is suitable for a wide range of applications, including industrial networking, intelligent transportation systems (ITS), and utility market applications that require robust performance in harsh environmental conditions.
Specifications
| Ethernet Interface | |
| Model | UF-MIES4X8GP-SFP |
| Ports | 4×1G/10G SFP+ 8×10/100/1000M Base-TX |
| Port Mode (Tx) | Auto-Negotiation Full/Half Duplex Mode Auto MDI/MDI-X Connection |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3ae for 10 Gigabit Ethernet IEEE 802.3x for flow control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication IEEE 802.3ad for Port Trunk with LACP |
| Packet Buffer Size | 12Mbits |
| Maximum Packet Length | Up to 10K |
| MAC Address Table | 16K |
| Transmission Mode | Store and Forward (full/half duplex mode) |
| Exchange Property | Delay time: < 7μs Backplane bandwidth: 128Gbps |
| IGMP Group | 4096 |
| Max. No. of VLAN | 256 |
| VLAN ID Range | VID 1 to 4094 |
| Power over Ethernet | |
| PoE Standard | 8 x IEEE 802.3af /IEEE 802.3at PoE |
| Power budget | Max. PoE output power budget 30W each port |
| Power Pin Assignment | 1/2, 4/5(+); 3/6, 7/8(-) in default |
| Physical Characteristics | |
| Housing | Aluminium case |
| IP Rating | IP40 |
| Dimensions (LxWxH) | 138mmx108mmx49mm |
| Installation | Rack Mount |
| Weight | 680g |
| Environmental | |
| Operating Temperature | -40ºC~80ºC (-40 to 176 ºF) |
| Operating Humidity | 5%~90% (non-condensing) |
| Storage Temperature | -40ºC~85ºC (-40 to 185 ºF) |
| MTBF | >250,000@Telcordia(Bellcore)GB |
| Heat Dissipation | 34 BTU/h |
| Cooling | Passive Cooling, Fanless Design |
| Noise Level | 0 dBA |
| Software Features | |
| Management Interface | CLI (Console/Telnet (RFC854)), WebUI (HTTPS), SNMPv3 |
| Management | ARP, Flow Control, DDM, DHCP Server/Client, IPv4/IPv6, LLDP, LLDP-MED, UDLD, Port Mirror, RMON, SNMPv1/v2c/v3, Syslog, Telnet, |
| File Management | Firmware Upgrade/Backup, Dual Images, Configuration Download/Backup, Multiple Configuration, TFTP(RFC783), HTTP, UART |
| Management Access | Management VLAN, Management ACL (256) |
| Filter | 802.1Q, GMRP, GVRP, IGMP Snooping v1/v2/v3, IGMP Querier V2/V3, QinQ VLAN |
| Redundant Network | Link Aggregation, STP/RSTP/MSTP/ERPSv2, Auto Edge Port, BPDU Filtering, Self-Loop Detection |
| Routing Redundancy | VRRP (Interface and IP Address) |
| VLAN | Support IEEE 802.1Q 4K VLAN, QINQ, Double VLAN, Voice LAN, Surveillance VLAN(Auto/Manual), Multicast VLAN Registration (MVR) |
| Time Management | Local, SNTP, NTP |
| Unicast Routing | OSPFv2, RIPv1/v2, Static Route |
| QOS | Support Queue Scheduling (WRR, WFQ, Strict Priority , Hybrid(WRR+SP or WFQ+SP); Priority Queue(8 queues/port); Class of Service(Port-based, 802.1p, IP TOS Precedence, IP DSCP), Trusted QoS, Rate Limitation |
| ACL Type | L2/L3/L4, MAC-based, IPv4-based, IPv6-based |
| Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
| Security | Broadcast Storm Control, HTTPS/SSLv2v3,TLSv1 RADIUS, TACACS+,AAA SSHv1/v2,Support DHCP Snooping, Option 43/82, 802.1X security access, Support user hierarchical management, ACL access control list, Support DOS, port-based MAC filtering/binding, MAC whitelist |
| MIB | Ethernet-like MIB, MIB-II, MIB-I, Bridge MIB, Bridge MIB extensions, RMON MIB(1,2,3 & 9 groups, RFC2737 Entity, RFC2863 Interface Group, SNMP-Community-MIB |
| Power Supply | |
| Power Consumption | 16 Watts Max (no PoE) |
| Power Inputs | 2 |
| Input Voltage | 48-57VDC, Redundant dual inputs |
| Connector | DC:1 removable 6-contact terminal blocks Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm |
| Protection | Overload Current Protection, Reverse Polarity Protection |
| LED Indicator | |
| PWR | Power status |
| RUN | System running status |
| Link/ACT | Data transmission status |
| RJ45 Port Speed | 1000M running status |
| ALM | Alarm information status |
| Certification Standard | |
| EMI | FCC Part15 Subpart B Class A, EN 55022 Class A |
| EMS | EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 |
| Collision | IEC60068-2-27 |
| Drop | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety grade | EN60950-1 |
Ordering Information
| Model | Description |
| UF-MIES4X8GP-SFP | L3 Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 1G/10G SFP+ Managed Ethernet Switch |
| SFP Options | SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
| SFP module is to be purchased separately. | |
| Mounting Options | Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |
| Power Options | 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
| Power Supply is to be purchased separately. |
