Audited Supplier
NBIO-5L
Long Time
1 Year
Fermentation Extraction
Borosilicate Glass
5L
Single Tube
Positive
Frame Agitator
Packed Tower Reactor
Electric Heating
Inner Coil Type
Automatic
New
3.5L
Stainless Steel 316L
50-1000rpm
Stainless Steel
off-Situ
Magnetic Drive
PLC and Touch Screen
AC Motor, Speed Adjustable
Two 250ml and Two 500ml Glass Bottles
Sterilizable PT100 Probe
NANBEI
Wooden Case
60*57*79cm
China
Product Description
Lab 1L 2L 3L 5L chemical Autoclavable Bioreactor stirred benchtop glass fermenter
Industrial computer function:(without master computer)
The NB-7000 Biology process PLC and I/O channels. English operation menu. The displaying interface which is LCD used in big screen only can display 8 lines English words or tow analysis curves at the same time. The controller system is available to receive I/O signal from different sensors and actuators.
Remark: This product is for civilian use only
BRIEF INTRODUCTION FOR LAB GLASS FERMENTER:
This system comprises 01 culture vessel with a total volume of 5L, pipelines, aeration system, sensor and
instruments, local control system (based PLC and touch screen monitor), remote control system (including software and
communications) and stainless steel bench etc.
Basic Unit For Bioreactor Lab Glass fermenter:
instruments, local control system (based PLC and touch screen monitor), remote control system (including software and
communications) and stainless steel bench etc.
| Total volume: 5L, working volume: 3.5L. Special borosilicate glass vessel with flat stainless steel (316L) top-plate and bottom end. Autoclavable. |
2.Top-plate: | Stainless steel (316L) top-plate, surface finished; with 2 septum addition ports, 1 flame inoculation port (also for harvest), 1 air inlet nozzle, 1 exhaust nozzle and 1 sampling tube etc. With 3 baffle cages and 1 "U" type cooling water tube. 1 Pt100 temperature sensor and 1 foam probe are provided. Clamp for silica gel hose at the side of the top-plate. |
3.Drive: | With AC motor, speed adjustable. Magnetic drive from bottom. P=180W. |
4.Agitator: | Solid stirrer shaft with 2 pieces of 6-blade disk impeller and 1 set of foam breaker. Rotate speed range: 50-1000rpm |
5.Aeration: | With stainless steel ring sparger in the vessel and silica gel tube and PALL air filter outside. |
6.Exhaust: | With stainless steel condenser and PALL filter. |
7.Peristaltic pumps: | 4 peristaltic pumps each assignable to function for acid/alkali, anti-foam and nutrient feeding. Each pump including perforation needles and silicone hose. Automatic or manual control. |
8.Reagent bottles: | Two 250ml and two 500ml glass bottles with screw-on cap. Autoclavable. |
9.Thermal circuit: | Electrical heating unit under the bottom end of vessel; piping and all required valves to be connected to cooling water supply. |
10.Sterilization | Off-situ sterilization in the autoclave. |
11.Power: | Main power supply for all electrical circuits, 220V/50Hz/1KW. |
12.Control cabinet | Cabinet with beveled control panel. Accommodate all control loops ordered. |
13.Bench: | Stainless steel (SS304) bench to support the glass vessel, surface polished. Accommodate motor and cooling water pipeline. |
The NB-7000 Biology process PLC and I/O channels. English operation menu. The displaying interface which is LCD used in big screen only can display 8 lines English words or tow analysis curves at the same time. The controller system is available to receive I/O signal from different sensors and actuators.
| PH | Sensor: Gel filled pH electrode made by METTLER TOLEDO (steam sterilizable) Indication: Digital display Range: 2.0~12.0 Precision: 0.01 for measuring, 0.1 for controlling Control: PI control for injecting acid or alkali via regulating 2 peristaltic pumps. Automatic alarm |
DO | Sensor: Dissolved oxygen electrode made by METTLER TOLEDO (steam sterilizable) Indication: Digital display Range: 0%-100 % or 0%-200% Control: online detected only |
Temp. | Sensor: Sterilizable PT100 probe Heater: Electric heating unit. Range: 5oC above cooling water to 40oC for controlling, and 0 to 150oC for measuring Precision: +/-0.3oC Indication: Digital display Control: PI control. Automatic alarm |
Agitation | Drive: DC motor, Magnetic drive from bottom Range: 50-1000rpm Precision: +/-3 rpm Indication: Digital display Impeller: 2 pieces of 6-blades disk impeller Control: PI control. Automatic alarm |
Pressure | Indication: pressure gauge Control: manual |
Aeration | Flow Meter: Glass rotameter Inlet Filter: 0.2um PALL filter, sterilizable Control: Manual |
Feeding | Indication: Injecting dosage cumulating and digital display Control: Set-point control via regulating a peristaltic pump. |
Anti-foam | Probe: Sterilizable conductivity probe Indication: Injecting dosage cumulating and digital display Control: Electronic control of pumping via conductivity control. Automatic alarm |
KEY PARTS:
| ITEM | DESCRIPTION | BRAND | Qty. | REMARK |
| pH electrode and cable | METTLER | 1 set | SWITZERLAND | |
| DO electrode and cable | METTLER | 1 set | SWITZERLAND | |
| Peristaltic Pump | EASTBIO | 4pcs | CHINA | |
| Reagent bottles | EASTBIO | 4pcs | CHINA | |
| Disc filter for bottles | PALL | 4pcs | USA | |
| Air filter | PALL | 2pcs | USA | |
| Touch screen | TAIWAN | 1 set | CHINA | |
| Software | BXBIO | 1 CD | CHINA |
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can we visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service:
- Warranty : 1 year
- We supply free part for quality problem in warranty
- Long life technical support and service
