Laboratory Emergency Shower and Eye Wash with Cover

1. Laboratory Worktops

1. Epoxy Resin Worktops
2. Phenolic Resin Worktops
3. Compact Laminates
4. Ceramic Worktops

1. Laboratory Accessories and Fittings

1. Epoxy Resin Sinks and Cupsinks
2. PP Sinks and Cupsinks
3. Water Taps
4. Gas Valves
5. Eye Washes
6. Emergency Safety Showers
7. Fume Extraction Arms
8. Pegboards 
9. Laboratory Centrifugal Blower

1. Laboratory Equipment

1. Laboratory Furniture
2. Laboratory Fume Hoods
3. Biological Safety Cabinets
4. Safety Storage Cabinets
5. Laminar Flow Cabinet
6. Other Safety Products
7. Desktop Air Purifier

1. Early Learning Series
2. Classroom Series
3. Library Series
4. Training Series
5. Stadium Series
6. Cafeteria Series
7. University Laboratory Series

Emergency Safety Showers and Eye Washes are Essential Safety Devices

1. Accidents caused by fire, scalding and others often happen in numerous firms.
2. There are also risks of eye injuries at places where great amount of dust can accumulate, for example, wood products production workshops.
3. The danger also lurks at schools, in laboratories, large kitchens, ships and at other places.
4. Experience shows that thousands of industrial accidents happen every year in spite of strict precautionary measures. These accidents cause the injured acute pain, disablement and may even lead to loss of lives.
5. The consequences of such accidents could be consiuderably limited by treating with water immediately.
6. Serious personal injury can be avoided through small costs. This is why every place where the danger lurks should install emergency safety showers or eye washes.

1. As a basic rule the emergency safety showers must be placed as close to the working places as possible. The flushing must start immediately after the accidents have occurred, and last at least 5 seconds. When installing the emergency safety showers, please remember that the showers must be easy to find and that the access must always be free.
2. If a person works alone, it is wise to install a sound and/or light alarm too, which begins functioning as soon as the shower is operated.

1. All emergency safety showers are constructed in a way that enssures easy operation.
2. When activating the emergency shower, the flushing continues automatically.
3. The injured person has help to keep eyes open by hand.
4. On the eye washes, the nozzles are protected by rubber cups to keep the injured from hurting again.
5. The nozzles also protect against dust and dirt by the caps, which are removed automatically by water.

1. The emergency safety showers are connected to the cold water system which ensures clean and fresh water. The temperature should be around 8ºC to 20 ºC.
2. The eye washes have the different pressure atomizing lip. It can be on the basic of locale hydraulic pressure to use the different pressure atomizing lip for the best effect.

 

Product Description

Laboratory emergency shower with eye wash

ME-H1110 (with cover)

1) Material : Stainless Steel 304
2) Surface fnishing : sanded
3)Assembling feature : the"Union"allows easier pipe connection and disconnection
4)Usage : drenching body and rinsing faces / eyes can be operated separately or simultaneously
5)Shower & eye wash switch : SS304 ball valve
6) Shower head : spinning-formed with curled rim, diameter 250 mm
7) Pipe diameter : 48 mm
8) Nominal pressure : 1.0 Mpa
9) working pressure : 0.2~0.4 Mpa
10) Testing pressure : 1.5 Mpa
11) Temperature requirement on working environment : 0°C~40°C
12) Flow rate of body shower : ≥76 L/min
13) Flow rate of eye/face wash : ≥11.4 L/min
14) Flow rate of eye wash : ≥1.5 L/min
15) Eyewash bowl features : ABS bowl, transparent PC bowl cover
16) Spray head feature : patented design, each spray head equips with one water - flow control valve
17) Inlet thread : Rc 1",female
18) Outlet thread : Rc 1",female
19) Inlet height ( from above the floor ) : 1500 mm
20) Outlet height ( from above the floor ) : 95 mm
21) Distance between spray heads : 170 mm
22) water pattern coverage : at the height of 1524 mm above floor, the water pattern covers a
circular area of at least 510 mm in diameter
 Notes : the inlet parts and outlet parts are customizable;
shutoff valve and flter are proposed to be equipped on the water-supply end.

 

 

Packaging & Shipping

Please check the fittings according to the table below. If there is damage or the quantity is not correct please contact the distributor in your area or contact our company directly, you will get prompt response.
NO.	Name	Qty	Materials	NO.	Name	Qty	Materials
1	Hexagon headed bolt M6X30	1	304 Stainless steel	13	1-1/4 T pipe	1	304 Stainless steel
2	Sprayer Plate	1	304 Stainless steel	14	Pedestal part	1
3	Connector	1	304 Stainless steel	15	Steel expansion bolt M10x80	4
4	Sprayer head Dia.250	2	304 Stainless steel	16	Push board	1
5	Bend 1X1-1/4	1	304 Stainless steel	17	1/2"Ball Valve	1
6	Pipe Dia32X2.5X450	1	304 Stainless steel	18	Eye wash valve bend pipe	2
7	Handle	1	304 Stainless steel	19	3/4 lock net	2
8	1"Ball valve	1	304 Stainless steel	20	Gasket of 3/4 lock net	2
9	Bend pipe Dia32X2.5X705	1	304 Stainless steel	21	Gasket Dia.30XDia.1.9	1
10	T Pipe 1X1-1/4	1	304 Stainless steel	22	Back Nut	1
11	Pipe Dia42X2.5X640	2	304 Stainless steel	23	Eye wash bend pipe part	1	304 Stainless steel
12	Eye wash pipe	1	304 Stainless steel

 

 

Other safety products

 

 

FAQ

 

Q1. Why choose us?
A1. We are the leading laboratory products supplier, OEM & ODM service are offered.
 
Q2. What's MAYEN main products?
A2. We supply epoxy resin worktops, epoxy resin sinks, phenolic worktops, water faucets, gas fittings, emergency showers, eye washes, pegboards, extraction arms and other accessories, fume hoods, equipment and lab furniture for laboratory.
 
Q3. How about the sample?
A3. We could send you the samples but the freight is collect.
 
Q4. How about the payment term?
A4. T/T & L/C  (50% deposit, the balance before shipment).
 
Q5. How about the delivery time?
A5. Within 7-15 workdays after receiving deposit.
 
Q6. How about the validity of quotation?
A6. Usually 60 days as the shipping freight and exchange rate can be fluctuant.
 
Q7. What is the shipping port?
A7. FOB to Guangzhou or Shenzhen Port,China(also can ship according to customers' request).
 
Q8. How about the package?
A8. Wooden crating or carton.
 
Q9. How to inspect the goods?
A9. Products will checked by our QC staff first, then our proejct manager. Client can come and check by themselves or by the third party.