Audited Supplier
RL-FLS3015-T60-3000W
Within 24 Hours
2 Years
Home Appliance, Environmental Equipment, Petroleum Machinery Manufacturing, Agriculture Machinery, Food Machinery, Aerospace Industry, Automotive Industry, Advertising Industry, Construction Industry
Water Cooling
Continuous Wave Laser
Metal
Gantry Type
Semiconductor Laser
Laser Vapor Cutting
3000*1500mm or 6000*1500mm
6000mm or 9000mm
20mm to 220mm or 20mm to 360mm
20*20mm to 200*200mm
Raycus or Ipg or Max
Raytools or Wsx or Ospri
Tongfei or Hanli
Metal Sheet and Metal Tubes
RAYLAS
Wooden Case
40HQ
China
8456110090
Product Description
Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
2.Technical Data for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
3.Technical Accuracy for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
4. Equipment Working Condition for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
5. Laser Source for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
We can equip the Raycus laser source or Max laser source with the laser cutting machine.
6.Laser Cutting Head for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
7. Laser Cutting Software for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
Cypcut Operating System (Higerman):
A simple visual operating system that allows for intuitive adjustment of laser power, gas type, and pressure; Automatic positioning; NC file import support, flexible process, image display, and simple operation The special processing system for H-shaped steel is easy to install, simple to operate, excellent in performance, complete in process solutions, realizing stable and high-precision cutting, integrating a powerful data process library, and bringing users a simple, convenient, and efficient intelligent experience
Nesting Software: supports all Tekla building software, intelligent nesting, reporting function, unlimited upgrades, and supports the WIN10 system. Intelligent temperature control, constant temperature guarantee.
8. Front Chuck and Back Chuck
For sheet and tube cutting machine, there are four types of chucks:
220mm, 240mm, 320mm, 350mm, etc.
Back Chuck System
Pneumatic Clamp:
Operate Mode: The four claws are controlled by pneumatic system which is intelligent and convenient.
Features:
1. It's easier to clamp any different kinds of pipes without any adjustment.
2. Travel distance: 0mm to 220mm. All of the axle can be adjusted easily according to pipe diameter. 3.The clamp pressure is able to adjusted, any thickness pipes can be non-damage clamped.
Sum: Save time, Save cost, Operate easily, More efficient!
Front Chuck System
Pneumatic Clamp:(0-220MM)
Operate Mode: The four claws are controlled by pneumatic system which is intelligent and convenient.
Features:
1. No matter square pipe or circular pipe, the claws can be adjusted easily according to pipe diameter.
2. Adopt fully enclosed design, effectively prevent smoke and dust from entering during cutting.
3. A large number of parts are designed with aerospace aluminum, which reduces the weight of the chuck, increases dynamic performance and rotational stability.
4. One-button clamping, easy to use and improve production efficiency.
9. Sheet & Tube Cutting Samples
10. Factory Pictures
If you want to know more, please feel free to contact us, we will reply you asap.
Model No.: RL-FLS3015-T60-3000W
Laser Source:1500W, 2000W, 3000W, 6000W, 12000W.1.Standard Configurations of RL-FLT3015-T60-3000W
| Major Configurations | Content | Brand |
| Laser Generator | Raycus | Raycus 3000W |
| Laser Cutting Head | Auto-Focus | Raytools, Switzerland BM111 |
| Height Controller | Capacitive transducer | BOCHU, China |
| CNC Controller | Cypcut/Tube-Pro | |
| Professional Laser Cutting Software | Fscut | |
| Speed Reducer | SHIMPO | SHIMPO, Japan |
| Rack and Pinion | YYC | YYC, Taiwan |
| Linear Guide | TBI | TBI, Taiwan |
| Proportional Valve | SMC | SMC, Japan |
| X/Y Drag Chain | IGUS | IGUS, Germany |
| Shield Cover | Domestic | Cangzhou, China |
| Industrial Water Chiller | Domestic | TongFei, China |
| Industrial PC and LCD Screen | Domestic | BOCHU, China |
| Voltage Stabilizer | Domestic | XiShun,China |
| Double Servo driver system | Yaskawa | Yaskawa, Japan |
2.Technical Data for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
| Technical spec | Standard Data |
| Machine Table Total weight | 7T |
| Total Power | 31KW |
| Laser Type | Fiber laser |
| Maximum Cutting Thickness | Sheet:20MM Mild steel, 12MM Stainless steel Pipe: 14MM Mild steel,8MM Stainless steel |
| Effective Cutting size | Sheet:1550x3080MM Round Pipe:20MM-220MM Square Pipe:150MM*150MM |
| Sheet Cutting X.Y Axis Drive system | Rack and Pinion mode, Japan Yaskawa Servo system X 1.3KW Y1 Y2 1.8KW |
| Tube Cutting W,Y Axis Drive system | Rack and Pinion mode, Japan Yaskawa Servo system W1 W2 1.3KW Y 1.8KW |
| Laser cutting head Drive System | Ball screw mode, Japan Yaskawa servo system 400W |
| Laser cutting head lifting distance | 200MM |
3.Technical Accuracy for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
| Maximum rapid X,Y Axis Speed | 120m/min |
| Maximum Acceleration X,Y Axis Speed | 1.2G |
| Position Accuracy | 0.02mm/M |
| Repeat Accuracy | 0.03mm/M |
| Cooling Style | Recycling water |
| Max loading weight of sheet cutting table | 1500KG |
| Max loading weight of tube cutting table | 170KG |
| Assistant Gas | Oxygen/Nitrogen/Compressor Air |
| Continuous Working Time | 24 Hrs |
4. Equipment Working Condition for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
| Sub item | Item | Requirements | Notes |
Power | Laser Source | 10KW | The total installed capacity is not less than 31KW, And this machine need very good ground line. |
| Chiller | 5.7KW | ||
| Machine Servo System | 10KW | ||
| Dust blower Motor | 3.8KW | ||
| Other accessories | 1KW | ||
| Stability of 3-phase power | 380V±5% | ||
| Instability of 3-phase power | <2.5% | ||
| Earthing | <4Ohm | ||
| Water | Water for Chiller | Distilled water without minerals | Change every month |
Gas | Cutting Gas | N2>99.5% | The processing parameters |
| O2>99.5% | |||
| AIR pressure should not less than 1MPA | |||
Working | Temperature requirements | 5-40 Degree | |
| Humidity requirements | Less than 70% | ||
Foundation requirement | There should be no vibration source nearby | If there is a vibration source on site or nearby, the user is required to dig an anti-vibration trench around the foundation | |
| Work piece | For CS and SS: quality surface and no rust | ||
5. Laser Source for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
We can equip the Raycus laser source or Max laser source with the laser cutting machine.
6.Laser Cutting Head for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
- Switzerland imported laser cutting head Raylas customized.
- Auto Focus function (software control focus)
- Anti-collision function with non-contact Capacitance sensor
- Breakpoints Cutting
- Quick and Convenient part changing
7. Laser Cutting Software for Fiber Laser Cutting Machine for Metal Sheets and Metal Tubes
Cypcut Operating System (Higerman):
A simple visual operating system that allows for intuitive adjustment of laser power, gas type, and pressure; Automatic positioning; NC file import support, flexible process, image display, and simple operation The special processing system for H-shaped steel is easy to install, simple to operate, excellent in performance, complete in process solutions, realizing stable and high-precision cutting, integrating a powerful data process library, and bringing users a simple, convenient, and efficient intelligent experience
Nesting Software: supports all Tekla building software, intelligent nesting, reporting function, unlimited upgrades, and supports the WIN10 system. Intelligent temperature control, constant temperature guarantee.
8. Front Chuck and Back Chuck
For sheet and tube cutting machine, there are four types of chucks:
220mm, 240mm, 320mm, 350mm, etc.
Back Chuck System
Pneumatic Clamp:
Operate Mode: The four claws are controlled by pneumatic system which is intelligent and convenient.
Features:
1. It's easier to clamp any different kinds of pipes without any adjustment.
2. Travel distance: 0mm to 220mm. All of the axle can be adjusted easily according to pipe diameter. 3.The clamp pressure is able to adjusted, any thickness pipes can be non-damage clamped.
Sum: Save time, Save cost, Operate easily, More efficient!
Front Chuck System
Pneumatic Clamp:(0-220MM)
Operate Mode: The four claws are controlled by pneumatic system which is intelligent and convenient.
Features:
1. No matter square pipe or circular pipe, the claws can be adjusted easily according to pipe diameter.
2. Adopt fully enclosed design, effectively prevent smoke and dust from entering during cutting.
3. A large number of parts are designed with aerospace aluminum, which reduces the weight of the chuck, increases dynamic performance and rotational stability.
4. One-button clamping, easy to use and improve production efficiency.
9. Sheet & Tube Cutting Samples
10. Factory Pictures
If you want to know more, please feel free to contact us, we will reply you asap.
