4 Colors 250m/min gear sleeve cylinder Central Drum Flexographic Printing Machine
Use:
This central impression (central drum) flexographic printing machine is suitable for printing such packing materials as polyethylene, polyethylene plastic bag, leather, glass paper and roll paper etc. And it is a kind of ideal printing equipment for producing paper packing bag for food, supermarket handbag, non-woven bag, vest bag and clothes bag, etc.
Characteristics:
1.Reasonable structure, advanced technology, easy operation, stable performance, accurate color register.
2.Adopting high-quality motor, high-quality inverter, save the electricity, reduce the run fluctuation.
3.When the machine is stopped working, printing rolls still keep moving; when rise the printing roller,
ink motor running automatically ;when fallen the printing roller, ink motor stop running automatically.
4.The machine is equipped with blower and heater; and the heater employed central temperature control system.
5.The use of individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
6.Roller adopts special steel processing, and through special treatment, greatly reduce the beating range.
7.Printing roller uses static balance and dynamic balance processing, hard anode oxidation treatment, small resistance,
beating small, achieves finally perfect printing effect.
8.Accurate printing effect achieved by special gear transmission device.
9.The printing machine all can choose advance configurations to achieve the high quality, the high-definition effect.
Suitable material:| Paper series: Kraft paper:40-350gsm, single-sided coated paper:30-350gsm, copy paper:15-350gsm, firecrackers and paper:40-350gsm, paper money and incense:25-350gsm, silicone paper:50-350gsm, coated paper:30-350gsm, dust-free paper:25-350gsm, release paper:40-350gsm, composite paper:30-350gsm, thermal sensitive paper:30-350gsm... | | Plastic film series: PVC:10-120micron, OPP:10-120micron, PE:12-120micron, PET:12-120micron, CPP:12-120micron... | | Woven:15-120micron, Weave fabric:15-120micron, Toilet paper, leather... | | Specific details welcome to contact Vera to know more details~ |
Main parameter:Printing width Item | 600mm | 800mm | 1000mm | 1200mm | 1400mm | 1600mm | Printing color | 4(PC:6+0,4+2,5+1,3+3) | Printing length | 16"-40cm/26"-90cm | Thickness of plate | 1.14mm.1.7mm 2.28mm.2.84mm. 3.94mm
Customized is available | Heating method | Electricity heating | Max.oven temp | Max. 80ºC(room temp. 20ºC) | Web fixing method for un/rewinder | Safety chuck+ Air expanding shaft | Printing plate lifting system | Hydraulic press control | Menchanical speed | 300m/min | Printing speed | 80m-250/min | Anilox cylinder | Ceramic anilox roller | Register precision | Longitude:±0.10mm,Transverse±0.10mm | Rewinder/UnwinderDIA | φ600mm~φ1000mm | | Total power | 107kw~110kw | Weight | 10000kg | 11500kg | 13000kg | 14250kg | 16000kg | 17050kg | Master Power | 7.5kw | 7.5kw | 7.5kw | 10kw | 10kw | 10kw | Dimension(L*W*H) | 9.5m*
2.0m*
3.95m | 9.5m*
2.0m*
3.95m | 9.5m*
2.0m*
3.95m | 9.5m*
2.0m*
3.95m | 9.5m*
2.0m*
3.95m | 9.5m*
2.0m*
3.95m |
Schematic diagram
Configuration details| Part 1 Unwind & Rewind Unit | | SN | Item | Qty | Specification | | 1 | Air shaft | 2pcs | Roller Dia. 76mm
1pcs for unwind
1pc for rewind | | 2 | Hydraulic station | 1SET | Output hydraulic oil to the hydraulic cylinder on the machine | | 3 | Ultrasonic Web guide | 1SET | 1.After manual adjustment, change to automatic mode
2.Automatic edge position control | | 4 | Corona treatment before printing | 1SET | Make the surface of the product have stronger adhesion | | 5 | Active unwinding with pneumatic loading&unloading | 1set | Active unwinding reduces material stretching.
Controlled by two servo motors, Two swing arms control the tension, one swing arm controls the feeding tension, and one swing arm controls the tension before discharging to the printing group. | | 6 | Cooling chiller before rewinding | 1set | Before winding, there are double-sided watercooled double rollers to prevent the material from sticking after winding without the temperature falling.
| | 7 | Active rewinding with pneumatic loading&unloading | 1set | Active winding reduces material stretching. Controlled by two servo motors. Two swing arms control the tension, one swing arm controls the tension from the printing group to the oven, and one swing arm controls the winding tension. Rewinding pneumatic pressure roller, material rewinding is more smooth. |
| Part 2 Printing Unit | | SN | Item | Qty | Specification | | 1 | central drum | 1SET | 1. Made from superior alloy
2.Steel and precise dynamic balance and electroplated treatment
3.Installed the high precision encoder , synchronous the speed
4.Diameter 0.8m
5.central drum with water cooling control
6.Circular runout is within 0.01mm | | 2 | Cooling chiller system +double wall central drum | 1SET | central drum double wall assort with the chiller , the water running and recycle inside of the central drum,and keep the surface temperature 30ºC (the supplier need 90 days make the double wall central drum) | | 3 | Automatic lubrication system | 1SET | Lubricate the big gear of the center drive | | 4 | Gear sleeve type Ceramic anilox roller | 4 Pcs | 1.Transfer ink evenly
2.Range: 100-1000 LPI
3.Diameter 156mm
4.the bearing adopts concentric bearings to reduce circular runout
5. ink transport bearing is enlarged to improve the service life of the ink transport bearing
| | 5 | Gear sleeve type Plate roller | 4Pcs | - Standard 400mm for machine
- Circumference:400-900mm
- Dynamic balance processing
- The plate roller cover is fixed by bearings to reduce printing vibration
| | 6 | Chamber doctor blade | 4sets | 1. Made from Aluminum alloy
2.Fast speed ,not spill the ink
3.Close type to reduce solvent volatilization
4.coating surface treatment | | 7 | Ink pump | 4sets | 1.Automatic circle system
2.Double diaphragm pump | | 8 | Servo Motor for
registration | 4SETS | 1.Motorized longitudinal registration and Motorized Transversal
2.check the video inspection to plc | | 9 | Hydraulic cylinder control the printing roller backward and forward automatic by servo motor | 4SETS | When machine stop printing, the hydraulic cylinder will up automatic | | 10 | Motor for Forward and backward | 4SETS | Motor control printing group to move forward or backward | | 11 | Video inspection with PLC | 1SET | -Color register adjuster by PLC via check the printing quality on the video screen
-Speed control
-Temperature control
-PLC with English and Chinese language()
So on | | 12 | Crane | 1SET | It's easy to lift and down the printing rollers and anilox rollers.
| | | Remoter | 2SET | One control the crane
One for adjust the plate roller to achieve color register |
| Part 3 Drying Unit | | SN | Item | Qty | Specification | | 1 | Top main oven | 1SET | 1.Air return design, frequency conversion drive, automatic adjustment of air volume and temperature, energy saving and convenient operation 2.Equipped with an exhaust fan to reduce the concentration of voc produced by printing in the workshop 3.Total power: 108kw | | 2 | Color group oven | 3sets | 1.The structure adopts the Coanda effect bellows, and at the same time controls the air volume in and out to keep the bellows dry. 2.The bellows adopts a closed design to avoid dry plates. |
| Part 4 Transmission part | | 1 | Transmission | 1SET | Main motor servo + gear drive. | | 2 | The aluminum roller | 1SET | All aluminum rollers are oxidized, some with bearings, the transmission is more silky, shape of splitting roller, better flattening.
The aluminum roller is dynamically balanced to reduce jumping at high speed. | | 3 | Double roller web guide | 1SET | Better control edge position before feeding into printing system |
Sample for reference:
Plastic film: HDPE,LDPE, BOPP, OPP and so on
Paper: kraft paper, paper cup paper, hamburger paper, thermal paper and so on
Non woven bag fabric, sponbond fabric, Lazy rag fabric and so on
           
All machine will be tested before shipment. And send video, sample, and container load photo one by one. 1.Are you a factory or trading company?
A: We are a factory, the real manufacturer not trader. | 2.Where is your factory and how can I visit it?
A: Our factory is located in Ruian City, Zhejiang Province, China about 40 minutes by plane from Shanghai ( 5 hours by train) | 3.What is your after-sale service?
A: We have been in flexo printing machine business for many years, we will send our professional engineer to install and test machine. Beside, we can also provide online support, video technical support, matching parts delivery, etc. So our after-salesservices is always reliable. | 4.How to get machines price?
A: Pls provide following information:
1)The color number of printing machine;
2)Material width and effective print width;
3)What material to print;
4)The photo of printing sample. |
Our Services
1 Year Guarantee !
100% Good Quality !
24 Hours online Service!
The buyer paid tickets ( go and back to wenzhou), and pay 100usd/day during the install and testing period!
|
Audited Supplier
