Audited Supplier
The telescopic loader is a vehicle that makes the two boom arms of the forklift truck telescopic. When needed, the forklift arm will be extended to complete the work that the original length of the shovel arm cannot reach. When it is not needed, the forklift arm will retract to the normal length to facilitate the usual work and use. Suitable for different sites, different industries, instead of manual, its compactness makes it a true partner for narrow site work.
| Model | LT1500 | TL2000 | TL2500 | |
| Engine | Brand | Domestic YUNNEI | YUNNEI turbocharged engine | YUNNEI |
| Specifi-CATion | In-line,water-colled,four-stroke four-cylinder diesel engineIn-line,water-colled,four-stroke four-cylinder diesel engine | |||
| Rated power | 37KW | 55KW | 76KW | |
| Optional engine | YUNNEI 42KW XINCHAI Euro3/EPA YANMAR EPA4 engine EPA4 KOHLER/ CUM MINS engine | YUNNEI engine(60kw/65kw),YTOE engine(58kw/62kw),CUM MINS engine(60kw),EPA4 CUM MINS/KOHLER engine | YUCHAI(78KW) | |
| Transfer system | Hydraulic torque converter, drive shaft, 50 drive axle, drum brake | Hydraulic torque converter,transmission drive,shaft,wheel brake | ||
| Bucket | Bucket capacity | 0.65m³ | 1 m³ | 1.3 m³ |
| Bucket width | 1600mm | 1900mm | 2200mm | |
| Bucket type | Bucket with teethBucket with teeth | |||
| Rated load | 1500KG (including vehicle) | 2000kg(including vehicle) | 2500kg(including vehicle) | |
| Overall weight | 4200kg | 5800kg | 6300kg | |
| Size | Dimensions | 5900*1800*2710mm | 6600*2050*2700mm | 6800*2200*2900mm |
| Max unloading height | 4200mm | 5000mm | 5700mm | |
| Distance of pin to ground | 3700mm | / | 5200mm | |
| Max turning radius of bucket outside edge | 5500mm | / | ||
| Min turning radius of front tire | 4400mm | / | ||
| Min turning radius of rear tire | 4700mm | / | ||
| Operation | Steering system | Hydraulic steeringHydraulic steering | ||
| Drive system | four-wheel drive Carter/Volvo/Bob -CAT Mechanical pilot, steady ascent | four-wheel drive Carter/Volvo/Bob -CAT Hydraulic pilot, steady ascent | four-wheel drive Carter/Volvo Hydraulic pilot | |
| Braking system | Foot/hand brake | |||
| Tyre | Model | 23.5/70-16 | 16/70-20 | 16/70-20 |
| Width | 330mm | 380mm | 380mm | |
| Diameter | 9200mm | 1075mm | 1075mm | |
| Optional tyre | 12-16.5 or 31*15.5-15 | |||
| Wheelbase | 2355mm | 2500mm | 2550mm | |
| Wheel track | 1415mm | 1600mm | 1700mm | |
| System pressure | 16Mpa | 20Mpa | 20Mpa | |
| Pressure output | 70L/min | 96L/min | 96L/min | |
| Model | TL1800 | TL3000 | TL3500 | |
| Engine | Brand | YUNNEI YN27GB | YUNNEI YN38GBZ | WEICHAI/WP6G125E22 |
| Type | In-line arrangement, water-cooled, four cylinder, diesel engine | In-line arrangement, water-cooled, four cylinder, turbocharged diesel engine | In-line arrangement, water-cooled, six cylinder, turbocharged diesel engine | |
| Rated power | 42KW | 76KW | 92KW | |
| Optional engine | YN27GB(58KW)/EURO3 or EURO5 XINCHAI KOHLER EPA4/CUM MINS EPA4/YANMAR | CUM MINS 74.5KW engine | CUM MINS engine | |
| Overall Dimension | Length | 5800mm | 7200mm | 7500mm |
| Width | 1900mm | 2200mm | 2280mm | |
| Height | 2680mm | 3000mm | 3200mm | |
| Bucket hinge pin Height | 4600mm | 6000mm | 6000mm | |
| Optional bucket hinge pin Height | 6800mm | 7000mm | 7000mm | |
| Transmission System | Gearbox+ Hydraulic converter+ Drive shaft+ Hub reduction axle(Disc brake) | Gearbox+ Hydraulic converter+ Drive shaft+ Hub reduction axle(Disc brake) | 315 Gearbox+ Hydraulic converter+ Drive shaft+ 28 Hub reduction axle | |
| Bucket | Capacity | 0.73 m³ | 1.5 m³ | 1.7 m³ |
| Width | / | 2200mm | 2300mm | |
| Type | Heavy-duty bolt on teeth | Heavy-duty bolt on teeth | Heavy-duty bolt on teeth | |
| Max. Load | 1800kg including bucket or attachment | 3000kg including bucket or attachment | 3000kg including bucket or attachment | |
| Optional Specifi-CATions | Steering system | Articulated hydraulic steering | Articulated hydraulic steering | Articulated hydraulic steering |
| Driving system | Four wheel drive | Four wheel drive | Four wheel drive | |
| Hydraulic quick release | YES | YES | YES | |
| Mechanical pilot joystick | YES | YES | YES | |
| Steady rise | YES | YES | YES | |
| Brake system | Service brake | Four wheel disc brake | Four wheel disc brake | Four wheel disc brake |
| Parking brake | Disc brake | Disc brake | Disc brake | |
| Type | Model | 23.5/70-16 | 16/70-24 Herringbone tyre | 17.5-25 herringbone tyre |
| Size(Width/Diameter) | 330mm/920mm | 410mm/1175mm | 440mm/1280mm | |
| Optional tyre | 17.5-25 herringbone tyre(W-440mm/D-1280mm) | |||
| Wheel base | 2500mm | 2800mm | 2800mm | |
| Track | 1550mm | 1750mm | 1750mm | |
| System pressure | 16Mpa | 20Mpa | 20Mpa | |
| Weight | 4500kg | 6800kg | 8000kg | |
| Model | TL4000 | |
| Engine | Brand | WEICHAI/WP6G175E22 |
| Power | 129KW | |
| Number of cylinders | 6 | |
| Colling way | Water cooling | |
| Engine type | Electronic unit injector engine | |
| Bucket | Capacity | 2 m³ |
| Wirth | 2300mm | |
| Type | Heavy-duty teeth | |
| Overall dimensions | Length | 7800mm |
| Height | 3230mm | |
| Width | 2300mm | |
| Tyre | Standard model | 20.5-25 Herringbone tyre |
| Transmission system | Hydraulic converter+ gearbox+ drive shaft+ hub reduction axles | |
| Brake syste | Service brake | Four wheel disk brake |
| Parking brake | Hand operated | |
| Braking type | Air brake | |
| Lifting to bucket hinge pin height | 6000mm | |
| Optional lifting to bucket hinge pin height | 7000mm | |
| Max. load | 4000kg including bucket or attachment | |
| Wheelbase | 2845mm | |
| Track | 1825mm | |
| Speed | 0-38km/H | |
| Weight | 1000kg(with bucket) | |
| System Pressure | 19Mpa | |
| Hydraulic Output | 184L/min | |
| Fuel tank capacity | 175L | |
The telescopic loader is a type of heavy machinery that performs well in engineering operations. It has the following characteristics:
1, High-quality and reliable engine, to provide powerful power output for the loader, and enable it to efficiently cope with a variety of complex and heavy work tasks.
2, The size of the loader is moderate, which not only ensures the stability of the operation, but also can adapt to different working Spaces to a certain extent.
3, The larger bucket capacity can reduce the number of operations and improve work efficiency. At the same time, the heavy-duty shovel teeth have the characteristics of high strength and wear resistance, which can be adapted to the excavation and loading of various hard materials.
4, Four-wheel drive for the loader to provide excellent traction and stability, in a variety of road conditions can be smoothly driven.
5, Good control performance. The hinge type hydraulic steering is flexible and the steering radius is small, which is convenient for the driver to control the steering of the loader in various working environments.
6. Complete security configuration. The use of disc brake, with good braking effect and heat dissipation performance, to provide protection for the loader's safe driving.
Hymaron Engineering Machinery Co.,ltd is engaged in bringing the most suitable solutions/equipments for client, fabri-CATors, EPC/C companies on pipe fabri-CATion, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
