Audited Supplier
Introduction
LORK is a alloy manufacturer with 20 years of manufacturing experience.
Common Trade Names: Invar 36, Nilo 6, Pernifer 6
Invar 36 UNS K93600 UNS K93603 1.3912 Ni36 Nickel Alloy
Invar 36 is a nickel-iron, low expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel. Alloy 36 maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500°F. This nickel iron alloy is tough, versatile and retains good strength at cryogenic temperatures.
Invar 36 (also known as Nilo, Nilvar, Permalloy D, FeNi36, and 64FeNi) is an nickel-iron alloy notable for its extremely low thermal expansion. Primary uses for Invar include laser and cryogenic components, tooling, dies, and any other application requiring high dimensional stability. Generally immediately available in most volumes, AE Alloys are available in machined shapes such as bar, ingot, ribbon, wire, shot, sheet, and foil. Ultra high purity and high purity forms also include metal powder, submicron powder and nanoscale, targets for thin film deposition, and pellets for chemical vapor deposition (CVD) and physical vapor deposition (PVD) applications. Please contact us above for information on specifications, lead time and pricing.
Invar 36 Alloy Bar Applications
As direct Invar 36 suppliers, ANTON distributes high-grade Invar 36 material for a wide range of industries where dimensional changes due to temperature variation must be minimized, some of the applications where UNS K93600 is utilized include:
▪ Tooling and Dies for Aerospace Composite
▪ ToolingThermoset Epoxy Systems
▪ Resin Transfer Molded Tools
▪ Cryogenic Components and Piping
▪ Laser Components
▪ Liquified Natural Gas (LNG)Marine fixtures and fastenersProduction and Storage Equipment
▪ LNG Tanker Membranes
▪ Marine Components
▪ Wind Turbines
Invar 36 Alloy Bar Specifications
| Grade | UNS | DIN |
| Kovar 4j36 | K93600 | W. Nr.1.3912,Ni36 |
Invar 36 Alloy Bar Chemical Composition
| Element | Content (%) |
| C | 0.15max |
| Mn | 0.6 max |
| P | 0.006 max |
| S | 0.004 max |
| Si | 0.4 max |
| Cr | 0.25 max |
| Ni | 36.0 |
| Co | 0.5 max |
| Fe | balance |
Invar 36 Alloy Bar Mechanical Properties
| Temperature | Yield Strength | Tensile Strength | Elongation | Reduction | |||
| °C | °F | MPa | Psi | MPa | Psi | 2" % | % |
| 20 | 68 | 240 | 35.0 | 490 | 71.0 | 42 | 70 |
Available Sizes And Specifications
| Invar 36 available sizes and specifications | |
| Grade | Invar 36 |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
