Audited Supplier
Speaker wire is a passive electrical component described by its electrical impedance,. The impedance can be broken up into three properties which determine its performance: the real part of the impedance, or the resistance, and the two imaginary components of the impedance: capacitance and inductance. The ideal speaker wire has no resistance, capacitance, or inductance. The shorter and thicker a wire is, the lower is its resistance, as the electrical resistance of a wire is proportional to its length and inversely proportional to its cross-sectional area (except superconductors). The wire's resistance has the greatest effect on its performance.The capacitance and inductance of the wire have less effect because they are insignificant relative to the capacitance and inductance of the loudspeaker. As long as speaker wire resistance is kept to less than 5 percent of the speaker's impedance, the conductor will be adequate for home use.
Application: For use as a signal wire connecting amplifier and speakers in an audio system..
Jacket: A variety of colors transparent PVC & Colored PVC
Jacket colour: Red and Black, Clear, Yellow, Blue, etc or according to customer's request
Standard: AWG or according to customer'
Conductor: OFC/TCU/CCA/TCCA/CCS
Rated Voltage: Low
Red and black speaker cable CU,CCA conductor, any specification and color could customize, 100meters / plastic spool packing
Specifications
1)Conductor: Tin copper,bare copper,cooper clad steel or CCA
2)Insulation: PVC-flame proof
3)Cable core: 2C, 4C, 6C, 8C, 10C
4)Shield: Single or double bonded aluminum foil. Unbonded aluminum foil, aluminum tape screen
5)Jacket: PVC
6)Standard packing: 100m/roll or as per requirement
Resistance Unbalance:<2.5%
Insulation Resistance:>3000Mohms-km
Mutual Capacitance:<100nF/km@1KHz
Impedance:100ohms+/-10%
Conductor tensil strength:>245Mpa
Conductor Resistance:<125ohms/km
| Model | Section MM2 | OD |
|---|---|---|
| 10GA X2C | 5.26MM2 | 5.5X11.0MM |
| 12GA X2C | 3.31MM2 | 4.5X9.0MM |
| 14GA X2C | 2.08MM2 | 3.5X7.0MM |
| 16GA X2C | 1.31MM2 | 3.0X6.0MM |
| 18GA X2C | 0.823MM2 | 2.5X5.0MM |
| 20GA X2C | 0.519MM2 | 2.2X4.4MM |
| 22GA X2C | 0.324MM2 | 2.0X4.0MM |
| 24GA X2C | 0.205MM2 | 1.8X3.6MM |
| 0.5MM2 x2c | 0.50MM2 | 2.4X4.8MM |
| 0.75MM2x2c | 0.75MM2 | 2.5X5.0MM |
| 1.0MM2 x2c | 1.0MM2 | 2.8X5.6MM |
| 1.5MM2x2c | 1.5MM2 | 3.2X6.4MM |
| 2.0MM2x2c | 2.0MM2 | 3.8X7.6MM |
| 2.5MM x2c | 2.5MM2 | 4.2X8.4MM |
| 4.0MM2 x2c | 4.0MM2 | 5.0X10.0MM |
| 6.0MM2 x2c | 6.0MM2 | 5.5X11.0MM |
| Color- Coded PE/PVC Insulation | |||||||
| Insulation Wraped with or without Polyester Tape | |||||||
| Rip Cord: Synthetic Fiber | |||||||
| Shield: AI/PET Foil | |||||||
| Optional Drain Wire: Solid Or Stranded Bare Copper | |||||||
| Jacket: PVC or LSZH | |||||||
| PE/PVC Insulated & PVC Jacketed Un-shielded Alarm Cable | |||||||
| C.S.Area | Construction | Insulation | Jacket | Overall | |||
| (mm2) | Core x No./Dia. | Thickness(mm) | Thickness(mm) | Diameter(mm) | |||
| 2*0.22 | 2*7/0.20 | 0.2 | 0.7 | 3.9 | |||
| 4*0.22 | 4*7/0.20 | 4.4 | |||||
| 6*0.22 | 6*7/0.20 | 5.0 | |||||
| 8*0.22 | 8*7/0.20 | 5.4 | |||||
| 10*0.22 | 10*7/0.20 | 6.2 | |||||
| 12*0.22 | 12*7/0.20 | 6.4 | |||||
| 14*0.22 | 14*7/0.20 | 6.6 | |||||
| 16*0.22 | 16*7/0.20 | 7.4 | |||||
| 20*0.22 | 20*7/0.20 | 7.8 | |||||
| 2*0.20 | 2*1/0.50 | 0.2 | 0.7 | 3.1 | |||
| 4*0.20 | 4*1/0.50 | 3.6 | |||||
| 6*0.20 | 6*1/0.50 | 4.2 | |||||
| 8*0.20 | 8*1/0.50 | 4.6 | |||||
| 10*0.20 | 10*1/0.50 | 5.3 | |||||
| 12*0.20 | 12*1/0.50 | 5.5 | |||||
| 14*0.20 | 14*1/0.50 | 5.9 | |||||
| 16*0.20 | 16*1/0.50 | 6.3 | |||||
| 20*0.20 | 20*1/0.50 | 6.9 | |||||
| 2*0.28 | 2*1/0.60 | 0.2 | 0.7 | 3.9 | |||
| 4*0.28 | 4*1/0.60 | 4.5 | |||||
| 6*0.28 | 6*1/0.60 | 5.0 | |||||
| 8*0.28 | 8*1/0.60 | 5.7 | |||||
| 10*0.28 | 10*1/0.60 | 6.0 | |||||
| 12*0.28 | 12*1/0.60 | 6.4 | |||||
| 14*0.28 | 14*1/0.60 | 6.8 | |||||
| 16*0.28 | 16*1/0.60 | 7.6 | |||||
| 20*0.28 | 20*1/0.60 | 8.2 | |||||
| PE/PVC Insulated & PVC Jacketed Un-shielded Security Alarm Cable with Power Cords | |||||||
| C.S.Area | Construction | Insulation | Jacket | C.S.Area | Construction | O.D. | Overall |
| (mm2) | Core x No./Dia. | Thickness(mm) | Thickness(mm) | (mm2) | Core x No./Dia. | (mm) | Diameter(mm) |
| 2*0.22 | 2*7/0.20 | 0.2 | 0.7 | 2*0.50 | 2*16/0.2 | 1.6 | 5.4 |
| 4*0.22 | 4*7/0.20 | 6 | |||||
| 6*0.22 | 6*7/0.20 | 6.4 | |||||
| 8*0.22 | 8*7/0.20 | 7.2 | |||||
| 10*0.22 | 10*7/0.20 | 7.5 | |||||
| 12*0.22 | 12*7/0.20 | 7.6 | |||||
| 2*0.22 | 2*7/0.20 | 0.2 | 0.7 | 2*0.75 | 2*24/0.2 | 1.8 | 6.0 |
| 4*0.22 | 4*7/0.20 | 6.6 | |||||
| 6*0.22 | 6*7/0.20 | 7.0 | |||||
| 8*0.22 | 8*7/0.20 | 7.8 | |||||
| 10*0.22 | 10*7/0.20 | 8.0 | |||||
| 12*0.22 | 12*7/0.20 | 8.2 | |||||
| *Above charter shows only the typical cables, customized order are also welcome! | |||||||
Factory photos and production process
Our Service:
1) Quick Response --All inquiries will be replied within 24 hours.
2) Professional Quotation --All prices will be quote according to customers' detailed
specifications & requirements.
3) OEM & ODM Service
4) Can print your own brand on the jacket printing with foot or meter marking.
5) Make customized designs for stickers, drums, outer cartons, etc.
6) Stable Quality --All materials and products passed restrict QC procedures,comply with
international standards.
7) Fast Delivery --LCL orders,15days after confirmation; FCL orders, 20 days after
Confirmation in usual.
Good After-sales Service
--We chose the fastest vessel to POD for delivery our goods to clients,
--All Documents will be issued according to clients' instructions, to save troubles from local customs.
--Any complaint to quality or packing issued will be responded, and terminated with proper solutions for clients.
FAQ:
Q1: What kind of cable do you produce?
A: We specialized in producing Coaxial Cable,Network Cable,Patch Cord,CCTV Cable,Optical Fiber Cable, Speaker Cable,Alarm Cable,Telephone Cable,Drop Wire,Audio Cable,HDMI Cable,Control Cable etc
We also provide cable accessory products such as connector, cable clip,cable tie,crimping tool, antenna dishe,splitters,amplifer,optical receiver,optical transmitter etc
Q2: What's your MOQ? Can you offer free samples?
A: Our MOQ is 10KM per item. Free samples can be sent to you if available in stock,freight cost need to be paid by your side.
Q3: What's your delivery time?
A: Normally, our delivery time is 15 days after received deposit,it base on the quantity of the order.
Q4: What's your payment term?
A: We accept T/T, L/C,Western Union.Other payments accept through negotiation.
Q5:What's your trade term?
A: We accept FOB ShangHai or Ningbo,CFR,CIF,EXW term
Q6: Where is your factory located? How can I visit there?
A: Our factory is located in Lin'An HangZhou City,ZheJiang Province,China.
1 hour drive from HangZhou XiaoShan International Airport
3 hours drive or 1 and half an hour by high speed rail to railway station from shanghai or Ningbo
