Audited Supplier
| Capstan diameter | 560mm |
| Capstan number | 11 |
| Inlet wire diameter | Φ6.0mm-Φ8.0mm |
| Outlet wire diameter | Φ2.0mm-Φ3.0mm |
| Tensile strength | ≤600mpa |
| Total compressibility | 90.53% |
| Average compressibility | 25.52% |
| Max. Speed | 12 m/s |
| Power | 22 KW*11 (Frequency conversion motor )+22KW*11(inverter) |
| Mold size | Φ40mm×25 |
| Block type | Vertical ,tilted |
| Take-up wire | Elephant trunk type take-up system |
| Die box | The mould box is composed of mixer and water cooling(4 set) |
| Drawing drum | Cast steel ZG45, surface surfacing and spraying tungsten carbide, HRC60. Surface roughness less than 0.8mm. |
| Mold box cooling | The drawing die is cooled by direct water inlet and water outlet, and the cooling effect is very good. |
| Tension frame | Internal tension frame. |
| Main frame | Welding of steel plate and square pipe. |
| Stop brake | Pneumatic brake |
| Vacuuming design | Reserve suction hole |
| Lighting | Each stand with separate lighting. |
| PLC | Siemens |
| Touch screen | Siemens |
| Low voltage electrical appliances | Delixi |
1) Easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) Running in a high automatization and intellectualization,no pollution
4)As the use of the frequency technology, changes in the larger context of parts of the compression ratio to meet the wide range of technology and high speed drawing.
5)Good cooling system, final wire quality is very good.
1. Warranty period: 1 year or 2000 working hours
2. Pay attention to the warranty scope
3. If the customer reports a quality problem, the following information must be provided:
1) Please verify the working time of the whole machine (nameplate photo, instrument photo)
2) Make a clear statement or cause analysis of the failure of the component (provide working environment, pictures, videos)
3) Give us feedback as soon as possible
Q1:1:What is your minimum order quantity?
----1unit, customized service is available
Q2:How Long for lead time ?
----If the parts are in stock, it is usually delivered within 10 working days. Other customized styles take about 20 working days. It depends on the customer's requirements for the forklift
Q3:How long is your warranty period?
---1 year or 2000 working hours
Q4: What payment terms do you accept?
---1) T/T 30% in advance as deposit,70% before loading
---2) T/T30% as deposit ,40% after inspection forklift ,30% before loading ----3) T/T20% as deposit ,50% after inspection forklift ,30% against BL copy
Q5:How about the shipping term ?
---1)LCL By Sea
---2)20GP/40HQ/45FT
---3)By Bulk Cargo
