Audited Supplier
Macor Machinable Glass Ceramic (MGC) performs like an advanced technical ceramic while having the versatility of a high-performance polymer and the machinability of a metal. It is a unique blend of characteristics from both families of materials and it is a hybrid glass-ceramic. In high temperature, vacuum, and corrosive situations, Macor performs well as an electrical and thermal insulator.
The fact that Macor can be machined using common metalworking tools is one of its key benefits. When compared to other technical ceramics, this enables noticeably quicker turnaround times and significantly reduced production costs, making it a superb material for both prototype and medium-volume production runs.
Macor has no pores and won't outgas when baked out properly. Unlike high temperature polymers, it is tough and rigid and won't creep or deform. Radiation resistance also applies to Macor machinable glass ceramic.
According to your specifications, we provide Macor Rods, Macor Sheets, and Macor Components.
| Typical Properties | Zero porosity Low thermal conductivity Very tight machining tolerances Outstanding dimensional stability Excellent electric insulator for high voltages Won't cause outgassing in vacuum environment Can be machined using common metalworking tools |
| Typical Applications | Coil supports Laser cavity components High-intensity lamp reflectors High-voltage electrical insulators Electrical spacers in vacuum systems Thermal insulators in heated or cooled assemblies |
Properties / Material | Macor Machinable Glass Ceramic |
Color | White |
Density (g/cm3) | 2.60 |
| Porosity (%) | 0 |
Compressive Strength (MPa) | 488 |
Rockwell Hardness | 40 |
Young's Modulus (@25ºC, GPa) | 65 |
| Modulus of Rupture (MPa) | 108 |
Thermal Conductivity (@25ºC, W/m·K) | 1.68 |
Thermal Expansion Coefficient (10-6/ºC) | 8.6 |
| Max.Working Temperature (ºC) | 1000 |
| Max.Continuous Working Temperature (ºC) | 800 |
| Dielectric Strength (KV/mm) | 40 |
| Dielectric Loss Tangent (@1KHz) | 4x10-3 |
| Dielectric Loss Tangent (@8.5KHz) | 7x10-3 |
| Volume Resistivity(Ω.cm) | >1014 |
| D 10 x L 100 mm | D 35 x L 150 mm | D 60 x L 100 mm | D 70 x L 150 mm | D 95 x L 100 mm |
| D 15 x L 100 mm | D 40 x L 150 mm | D 60 x L 150 mm | D 75 x L 100 mm | D 100 x L 100 mm |
| D 20 x L 150 mm | D 45 x L 150 mm | D 65 x L 100 mm | D 75 x L 150 mm | D 105 x L 100 mm |
| D 25 x L 150 mm | D 50 x L 150 mm | D 65 x L 150 mm | D 80 x L 100 mm | D 110 x L 100 mm |
| D 30 x L 150 mm | D 55 x L 150 mm | D 70 x L 100 mm | D 85 x L 100 mm | D 120 x L 100 mm |
*A standard length of 304.8mm (1 foot) is also available.
*Customized sizes are available upon request.
Machinable Glass Ceramic Sheets
| L 50 x W 50 x T 5 mm | L 200 x W 100 x T 5 mm | L 100 x W 100 x T 10mm |
| L 100 x W 50 x T 5 mm | L 50 x W 50 x T 10 mm | L 200 x W 100 x T 10mm |
| L 100 x W 100 x T 5 mm | L 100 x W 50 x T 10 mm | L 300 x W 200 x T 50mm |
*Customized sizes are available upon request.
"It has been over 6 years since your company became our trusted supplier. During all years' requisitions, we were happy with your good quality products and reliable service. Appreciated your previous service with all efforts: patience, reliability, and responsible quality." --- by CoorsTek, Nov. 2023
Q: What is your minimum order quantity (MOQ)?
A: Our minimum order quantity (MOQ) is 1 piece for standard Macor rods and Macor sheets. Customized Macor components depend on dimensions.
Q: Do you provide free samples?
A: Yes, we are pleased to provide a free sample for your initial evaluation of our materials if we have the sample in stock and its cost is bearable.
Q: Do you accept a trial order before a bulk purchase?
A: We welcome your trial order to verify our quality before your bulk purchase.
Q: What is your production time?
A: Our production time is 3-10 days for standard Macor rods and Macor sheets. For customized Macor components, it depends on structure, tolerances, and quantity, normally, it takes 15-25 days. Please share your specific requirements with us, and we will quote the fastest production time.
Q: What are your payment terms?
A: Our payment terms are T/T, L/C, and PayPal.
Q: What packaging do you use to ensure ceramics are safe?
A: We pack the ceramic products tidily with foam protection inside the carton, plastic box, and wooden box.
Q: Do you accept custom orders?
A: Of course, most of our orders are custom products.
Q: Would you provide our order's inspection report and material test certificate?
A: Yes, we can provide these documents upon request.
