Audited Supplier
THJ-38
Online Support, Video Technical Support
1 Year, 1 Yeay
Transfer Print
Multi-Colour Printing Press, Multi-Colour
Semi-Automatic
10 Min, 10min
Ink Jet
Platen Press
Continuous
Transfer Print
38X38cm (15"X 15")
Entry
Manual
to Transfer DIY Photos on T-Shirts
Flat
110V 60Hz / 220V 500Hz
25kg
68*47*44cm
Refine
Export Standard Carton
CE
Hefei, Anhui
84513000
Product Description
low price uplex popular China 38*38cm clothing sublimation Heat Press Machine
This manual high pressure heat press machine is special design for those people who has shop which need to print t shirt, small space occupied.
| Model | THJ-38 |
| Working Area | 38*38cm |
| Max Temperature | 250ºC |
| Pressure | 110V 60HZ / 220V 500HZ |
| Power | 1800W |
| Weight | 25kg |
| Machine size | 55*39*35cm |
| Packing size | 68*47*44cm |
1.The whole structure is made of stamping parts.
2.The heating panel is safer because it has internal wiring mode.
3. The two blosters are precise cast aluminum sheets.
4. The temperature touching wire use silver contact, the temperature is more stable.
5.The intrument adopts LCD touch screen
6. with free switch between Fahrenheit and Celsius.
7. Temperature tolerance plus or minus
8. Adjust temperature when it is too hot.
9. The working time of the relay can be adjusted freely.
10.Thermal insulation cotton is made of environmental friendly material.
11. The internal package takes high density polystyrene mold processing molding, it can afford 80kgs weight .
12. The outside package use high strenght surface paper composite molding.
13. Due to the package is molding, the whole package size is 0.012 cube smaller than conventional models.
FAQ:
(1). We will provide you one year warranty. In the first year, if any problem, we will
exchange new parts for you and we pay for the dhl fee(not include the laser tube and
mirrors consumables.).
(2). To better serve you and assist you conveniently, we will provide you online technical
support. If you have any question, you can discuss with our technician online by Skype,
Whatsapp, etc.
Operations:
1 Attention: proper and stable protective ground-wire must be prepared for whole machine.
1)Adjust the temperature to requested temperature, which usually between 120°C-200°C.
2) Set the timer to request time which usually between 5s-20s.
3) Put the material on the lower plate then place transfer paper (pay attention on front and back of it),
Press handle till the end.
4)Attention: Strength mustn't exceed thirty kg to protect normal working of handle.
Buzzer is working when timer indicated completion of hot-stamping, then replace the handle.
5)If cold peel thermo printing paper, erase it by brush within five to ten seconds then peel the thermo
printing paper.
If hot peel thermo printing paper, erase it immediately after completion of printing.
Perfect thermo-printing requires the cooperation of correct time, temperature and time.
