Audited Supplier
The product has the characteristics of high breaking capacity, good dynamic and thermal stability, flexible electrical solutions, convenient combination, strong practicality, novel structure, and high protection level. Can be used as a replacement product for low-voltage switchgear.
The GGD type AC low-voltage distribution cabinet complies with standards such as IEC439 "Low voltage switchgear and control equipment" and GB7251 "Low voltage switchgear and control equipment".
Working conditions
The ambient air temperature shall not exceed+40 ºC and not be lower than -5 ºC. The average temperature within 24 hours shall not exceed+35 ºC.
For indoor installation and use, the altitude of the usage location shall not exceed 2000m.
The relative humidity of the surrounding air shall not exceed 50% at a maximum temperature of+40 ºC, and a relatively high humidity is allowed at lower temperatures. (For example, 90% at+20 ºC) should take into account the impact of temperature changes on occasional condensation.
The inclination between the equipment and the vertical plane during installation shall not exceed 5 °.
The equipment should be installed in a place without severe vibration and impact, as well as in a place that is not sufficient to corrode electrical components. When users have special requirements, negotiate with the manufacturer to resolve them.
| Model | Rated voltage (V) | Rated current (A) | Rated short-circuit breaking current (kA) | Rated short-term withstand current (1S) (kA) | Rated peak withstand current (kA) |
| GGD1 | 380 | A1000 | 15 | 15 | 30 |
| GGD1 | 380 | B 600(630) | 15 | 15 | 30 |
| GGD1 | 380 | C400 | 15 | 15 | 30 |
| GGD2 | 380 | A 1500(1600) | 30 | 30 | 63 |
| GGD2 | 380 | B1000 | 30 | 30 | 63 |
| GGD2 | 380 | C600 | 30 | 30 | 63 |
| GGD3 | 380 | A3200 | 50 | 50 | 105 |
| GGD3 | 380 | B2500 | 50 | 50 | 105 |
| GGD3 | 380 | C2000 | 50 | 50 | 105 |
Operational safety:
We can provide users with special security measures through the following security measures:
Integrated three station load switch
The circuit breaker adopts a load switch instead of an isolation switch, which is safer and more reliable. The fully enclosed design on the primary side provides protection against accidental contact and meets the five prevention requirements. The mechanical interlocking live display can provide live indication for incoming and outgoing lines. The operation is reliable. The fully enclosed design seals all 10kV switches and the live body of the busbar in an air box welded with 3mm stainless steel plate; Equipped with silicone rubber cable plugs, the cable head is fully insulated and sealed, so that it is not affected by external environments such as dust, moisture, and small animals. The spring energy storage operation mechanism can be manually or electrically operated. The panel can provide switch position indication. The cabinet body is made of galvanized sheet, and the surface is electrostatic sprayed to enhance corrosion resistance. The pressure gauge monitors the safe pressure range of SF6 gas inside the box.
Economy:
Maintenance free
Highly reliable
The service life can reach 20 years
Flexible plan:
Multiple entry methods, capable of achieving left, right, up, or forward lines
Multiple combination methods, allowing for arbitrary combinations between units
Using insulated busbars, it is possible to achieve front and rear cabinet connection or left and right cabinet connection
Flexible design scheme
Widely applicable:
The output line has a large capacity and small footprint, making it suitable for various application needs.
Lipeng Electric Co, Ltd. is specialized in the research and development, as well as the production and manufacturing of power transmission and
distribution equipment such as cable tap connections, high and low voltage switchgear, box type substations, and switching stations. The
company has a group of high-quality technical management talents, with over 30% of R&D personnel holding intermediate or higher
professional titles, and over 20% of management personnel holding intermediate or higher professional titles. By adopting modern information technology and fully implementing lMs (Computer Integrated Manufacturing System) and PDM (Product Data Management System), the production and management capabilities of enterprises have been elevated to a new level.
On the basis of obtaining mandatory 3C certifcation and ISO9001 guality management system certification in China, the company has also
passed lS014004 environmental management systerm certification and ISO45001 occupational health and safety management system certifica
hon. The product is widelv used in maior eneineering proiects both domesticalvy and internationaly, invoiving industries such as power trans
portation, steel metallurgy, petrochemicals, national defense industry, communication, environmental protection, and construction, and has
received widespread praise from users.
1.A: Are you manufacturer?
Q: Yes, we are manufacturer. Our factory is in Guangzhou City, Guangdong Province.
2.A: Can I get guarantee of products?
Q: Yes, every product is 1 year quality warrantee under customer correct using the products.
3.A: Do you have any Certificate?
Q: Yes. Each of our unit has CE, 3C and KEMA certificate. lf you need any other Certificate, we can help you to apply it.
4.A: How can l pay you?
Q: Pay by T/T and L/C is acceptable.
5.A: What about the production?
Q: In general, it take 4~6weeks and it depend on the different style.
