Model | LRS-50-5 | LRS-50-12 | LRS-50-15 | LRS-50-24 | LRS-50-36 | LRS-50-48 | |||||
DC output voltage | 5V | 12V | 15V | 24V | 36V | 48V | |||||
Rated output voltage | 10A | 4.2A | 3.4A | 2.2A | 1.45A | 1.1A | |||||
Output current range | 0-10A | 0-4.2A | 0-3.4A | 0-2.2A | 0-1.45A | 0-1.1A | |||||
Rated power | 50W | 50.4W | 51W | 52.8W | 52.2W | 52.8W | |||||
Wave and noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |||||
Voltage Adj.range | 4.5-5.5V | 10.2-13.8V | 13.5-18V | 21.6-28.8V | 32.4-39.6V | 43.2-52.8V | |||||
Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |||||
Line regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||
Load regulation | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||
Efficiency | 83% | 86% | 88% | 88.0% | 89% | 90% | |||||
AC input voltage range | AC85~264V 47~63Hz; 120~373VDC | ||||||||||
Input current | 0.95A/115V 0.56A/230V | ||||||||||
AC inrush current | Cold-start 45A/230V | ||||||||||
Overload protection | 110%~150%Protection type: Hicc up mode,recovers automatically after fault condition is removed | ||||||||||
Overvoltage protection | 5.9-7.3V | 13.8-16.2V | 18.75-21.75V | 28.8-33.6V | 41.4-48.6V | 55.2-64.8V | |||||
Protection type: Shut down o/p voltage,re-power on to recover | |||||||||||
Setup rise time | 1000ms,30ms/230VAC 2000ms,30ms/115VAC at full lode | ||||||||||
Hold up time | 30ms/230VAC,12ms/115VAC at full lode | ||||||||||
Withstand voltage | I/P-O/P:3.0KVAC,I/P-FG:2KVAC,O/P-FG:1.25KVAC | ||||||||||
Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25ºC/70%RH | ||||||||||
Working temperature | -20ºC~+70ºC | ||||||||||
Overall dimension | 99*82*30mm | ||||||||||
Safety standards | Meet ULGB4943 UL60950 EN60950 | ||||||||||
EMC standards | Meet EN55022,EN61000-3-2,EN61000-3-3,EN55024 GB9254 Class B | ||||||||||
Weight | 0.23Kgs |




