Audited Supplier
LX Single Girder Suspension Explosion Proof Overhead Crane with electric Hoist
TYPE | single Beam Overhead Crane |
Tonnage | 1T/ |
Span(main beam length) | 5 meters to 40 meters |
Lifting Height | 3 meters to 40 meters |
Working Level | A3 | A4 | A5 | A6 | A7 |
Lifting Speed | 5/0.8 m/min double speed OR Customized |
Trolley running speed | 0-20 m/min frequency conversion OR Customized |
Cart running speed | 0-32 m/min frequency conversion OR Customized |
Warranty time | 18 MONTHS AFTER SHIPMENT |
Lifting Motor | Squirrel cage 2-speed motor with Disc electromagnetic brake inside |
Gear Motor | Hardened tooth gear for C.T.& L.T. |
Surface preparation type | Shot Blasting Sa2.5 |
Painting Type/Depth | E/120µm |
Electric Panel | Schneeider brand |
Max./Min. Static Wheel Load | 62.9/11.8 kN |
Control Method | Remote control |
Industrial Voltage | 380V 50HZ 3P AC OR Customized |
Working temperature | -20~45ºC OR Customized |
Application area | Factory,workshop,warehouse,power station,logstic,etc. |
Brief Introduction:
This under hung single girder bridge crane is one kind of light duty crane, it runs under H steel rail .It is designed and made by reasonable structure and higher strength steel .
It uses together with CD1 model MD1 model electric hoist as a complete set, it is a light duty crane with a capacity 0.5 ton ~ 20ton. The span is 5-40m. Working duty is A3~A5, working temperature is -25-40ºC.
This product is widely used in plants, warehouse,steel plant,steel yard, material stocks etc to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosive environment(Need explosion proof type for this).
This product has two operational methods, ground(pendent controller /remote controller) or operational cabin room .
We accept customized production according to your special requirements.
- Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the bridge and runway beams
- Most economical option for light to medium-duty cranes
- Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing roof structure without the use of additional support columns.
- Better hook approach for both trolley travel and bridge travel
- Easier to install, service, and maintain
- Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
- Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
- Great for facilities with low headroom
other products
Dlk is mainly engaged in European standard single and double bean bridge crane and gantry crane's design, amnufacturing, and installation work.
DLK products derived from international advanced German technology, the main product is advanced European standard hoisting machinery, based on energy conservation and environmental protection, lightweight, low failure,convenient operation, easy maintenance, creating economic practical value and complete services, thus lasting customer satisfaction is guaranteed.
Q1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.Please give us the information as clear as you can, so we can give our best design to suit for your demands.
Q2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.
Q3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
Q4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
Q5:In order to offer the most suitable design solution for you, It will be great helpful if you can offer us the following information to us:
1.Lifting capacity.
2.Span length.(rail center to rail center)
3.Lifting height.(hook center to ground)
4.Have you installed the rails?Do you need us to supply the rails?How long is it?
5.Power supply:Voltage.
6.Working condition:What kind of material to lift?Temperature?
7.It would be much better if it is possible for you to offer the drawing photo of your workshop.
