Audited Supplier
M2 M42 M35 DM05 saw blank metal cutting HSS circular saw blade SLITTING SAW
Saw blade including metal hot-cutting circular m35 hss circular saw blade for cutting stainless steel, metal cold-cutting circular m35 hss circular saw blade for cutting stainless steel , TCT circular m35 hss circular saw blade for cutting stainless steel , HSS segmental circular m35 hss circular saw blade for cutting stainless steel , and diamond circular saw blank, band saw blade ,slitting saw, slotting saw ,all available.
| ASTM | DIN | JIS | C | Si | Mn | P | S | Cr | Mo | V | W | Co |
| M2 | 1.3343 | SKH51 | 0.78~0.88 | 0.20~0.45 | 0.15~0.40 | 0.030 Max | 0.030 Max | 3.75~4.50 | 4.50~5.50 | 1.75~2.20 | 5.50~6.75 | - |
| M35 | 1.3243 | SKH55 | 0.82~0.95 | 0.2~0.45 | 0.15~0.4 | 0.030 Max | 0.030 Max | 3.8~4.5 | 4.75~5.25 | 1.75~2.15 | 5.5~6.5 | 4.6~5 |
| M42 | 1.3247 | SKH59 | 1.05~1.15 | 0.15~0.65 | 0.15~0.4 | 0.030 Max | 0.030 Max | 3.5~4.25 | 9~10 | 0.95~1.35 | 1.15~1.85 | 7.75~8.75 |
| M50 | 1.3325 | 0.78~0.88 | 0.20~0.60 | 0.15~0.45 | 0.030 max | 0.030 max | 3.75~4.50 | 3.90~4.75 | 0.80~1.25 | - | - | |
| T1 | 1.3355 | SKH2 | 0.62~0.8 | 0.2~0.40 | 0.1~0.40 | 0.030 Max | 0.030 Max | 3.75~4.5 | - | 0.9~1.3 | 17.25~18.75 | - |
| T15 | 1.3202 | SKH10 | 1.30~1.45 | <0.45 | <0.4 | 0.030 Max | 0.031 Max | 3.8~4.5 | 0.7~1.0 | 3.5~4.0 | 11.5~12.5 | 4.5~5.0 |
| T4 | 1.3255 | SKH3 | 0.7~0.8 | 0.1~0.4 | 0.1~0.40 | 0.030 Max | 0.030 Max | 3.75~4.5 | 0.4~1 | 0.8~1.2 | 17.5~19 | 4.25~5.75 |
Different Model of HSS Circular saw blade is available.
HSS/ HSS-E DMo5 circular saw blade M2 M35 DIN 1.3343 DIN 1.3243
| Dia*thickness | Hole:From 5mm-32mm-40mm-50mm etc | |
| 20x0.2-3 | 25x0.2-6 | 32x0.2-6 |
| 40x0.2-0.8 | 75x6.5-7 | 125x0.8-1.2 |
| 40x1-1.5 | 75x7.5-8.5 | 125x1.5 |
| 40x2 | 80x0.5-0.8 | 125x2 |
| 40x2.5-3 | 80x1-1.2 | 125x2.5-3 |
| 40x3.5-4 | 80x1.5 | 125x3.5-4 |
| 40x4.5-5 | 80x2 | 125x5 |
| 50x0.5-0.8 | 80x2.5-3 | 125x5.5-6 |
| 50x1-1.5 | 80x3.5-4 | 150x1-1.2 |
| 50x2 | 80x4.5-5 | 150x1.5 |
| 60x0.3-0.4 | 80x5.5-6 | 150x2 |
| 60x0.5-0.8 | 80x6.5-7 | 150x2.5-3 |
| 60x1-1.2 | 80x8 | 150x3.5-4 |
| 60x1.5 | 100x0.5-0.8 | 150x4.5-5 |
| 60x2 | 100x1-1.2 | 150x5.5-6 |
| 60x2.5-3 | 100x1.5 | 150x6.5-7 |
| 60x3.5-4 | 100x2 | 150x7.5-8.5 |
| 60x4.5-5 | 100x2.5-3 | 160x1-1.2 |
| 63x0.5-0.8 | 100x3.5-4 | 160x1.5 |
| 63x1-1.2 | 100x4.5-5 | 160x2 |
| 63x1.5 | 100x5.5-6 | 160x2.5-3 |
| 63x2 | 100x7 | 160x3.5-4 |
| 63x3 | 100x8 | 160x4.5-5 |
| 75x0.5 | 110x0.8-1.2 | 160x5.5-6 |
| 75x0.6-0.8 | 110x1.5 | 200x1.5 |
| 75x1-1.2 | 110x2 | 200x2 |
| 75x1.5 | 110x2.5-3 | 200x2.5-3 |
| 75x2 | 110x3.5-4 | 200x3.5-4 |
| 75x2.5-3 | 110x4.5-5 | 200x4.5-5 |
| 75x3.5-4 | 110x5.5-6 | 200x5.5-6 |
| 75x4.5-5 | 110x7 | 200x6.5-7 |
| 75x5.5-6 | 110x8 | 200x7.5-8.5 |
| 225x2 | 250*1.0-2.5 | 275x1.0-2.5 |
| 300x1.2-3.0 | 315x2.0-3.0 | 325x2.0-2.5 |
| 350x2.0-3.0 | 370x2.5 | 400x2.0-3.0 |
| 425x3.0 | 450x3.0 | 500x3.0-4.0 |
Diameter mm Bore
1.5" 40 5/8"to 2"
8" 200 5/8"to 2"
10" 250 5/8"to 2"
12" 300 5/8"to 2"
14" 350 5/8"to 2"
15" 400 5/8"to 2"
19" 500 5/8"to 2"
The different kinds of tooth forms are used according to different requirements of cutting.
How to choose the right tooth form?
1.Tooth form "A" and "AW"
For thin Metal Slitting m35 hss circular saw blade for cutting stainless steels with a tooth pitch up to approx. 3.0mm Advisable for brass, tooth form "A" is
suitable for slotting materials. All teeth of tooth form "AW" are bevelled alternatively.
2.Tooth form "B" and "BW"
Suitable for cutting tubes and profiles made of steel or non-ferrous metals. Tooth form "B" is specialized for cutting very thin walled popes and profiles. All teeth of tooth form "BW" are bevelled alternatively.
3.Tooth form HZ
This tooth is also known as form "HZ". Teeth are ground according to the roughing and finishing tooth system. A tooth pair is consisting of one roughing tooth(1/3 cutting width) and one finishing tooth(2x1/3 cutting width). According to the triple chip geometry the roughing tooth is approx.0.2-0.3mm higher compared with the finishing tooth. Tooth form "HZ" is suitable for cutting solid materials.
4.Tooth Form BR
Tooth form BR is a parrot tooth with chip breaker.This tooth form is sutiable for cutting pipes under high performance conditions because the teeth are side cutting.
| AISI | DIN | JIS | Stock | Application |
Hot Work Tool Steel | H11 | 1.2343 | SKD6 | √ | Die Casting Dies,Extrusion Dies, Hammer Dies, |
H13 | 1.2344 | SKD61 | √ | ||
H10 | 1.2365 | SKD7 |
| ||
-- | 1.2367 | -- |
| ||
L6 | 1.2714 / 1.2713 | SKT4 | √ | ||
H12 | 1.2606 | SKD62 |
| ||
H21 | 1.2581 | SKD5 | √ | ||
Cold Work Tool Steel | D3 | 1.2080 | SKD1 | √ | Cutting Tools, Punching Tools, Shear Bladers, Reamers, Thread Rolling Dies, Calipers, Sockets etc. |
-- | 1.2601 | ~SKD11 | √ | ||
D2 | 1.2379 | ~SKD11 | √ | ||
-- | 1.2379 MOD | DC53 (Daido) | √ | ||
D6 | 1.2436 | -- |
| ||
O1 | 1.2510 | SKS3 | √ | ||
O2 | 1.2842 | -- |
| ||
A2 | 1.2363 | SKD12 |
| ||
S1 | 1.2550 | -- |
| ||
S7 | 1.2357 | -- |
| ||
-- | 1.2767 | SKT6 |
| ||
L2 | 1.2210 | -- |
| ||
Plastic | P20 | 1.2311 | -- | √ | Mold Base, Core & Cavity, Bumper Mold etc. |
P20+Ni | 1.2738 | -- | √ | ||
P20+S | 1.2312 | -- | √ | ||
-- | 1.2316 | -- |
| ||
420 | 1.2083 | SUS420J2 | √ | ||
-- | -- | NAK80 (Daido) | √ | ||
Alloy Steel | 4120 | 25CrMo4 / 1.7218 | SCM420 |
| Shafts, Gears, Drillers, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Crankshafts, Connecting Rods, Came, Couplings etc. |
4135 | 34CrMo4 / 1.7220 | SCM435 |
| ||
4130 | 34CrMo4 / 1.7220 | SCM430 | √ | ||
4140 | 42CrMo4 / 42CrMoS4 / 1.7225 | SCM440 | √ | ||
4142 | 41CrMo4 / 1.7223 | SCM440 |
| ||
4145H | -- | -- |
| ||
4330V | -- | -- |
| ||
4340 | 34CrNiMo6 / 1.6582 | SNCM439 |
| ||
5115 | 16MnCr5 / 16MnCrS5 / 1.7131 |
|
| ||
5120 | 20MnCr5 / 20MnCrS5 / 1.7147 | SMnC420H |
| ||
5140 | 41Cr4 / 41CrS4 / 1.7035 | SCr440 | √ | ||
8620 | 21NiCrMo2 / 1.6523 | SNCM220 |
| ||
8640 | 40NiCrMo2-2 / 1.6546 | SNCM240 |
| ||
-- | 18CrNiMo7-6 / 17CrNiMo6 / 1.6587 | -- |
| ||
9840 | 36CrNiMo4 / 1.6511 | -- |
| ||
E71400 | 41CrAlMo7-10 / 1.8509 | SACM1 |
| ||
-- | 34CrAlNi7 / 1.8550 | -- |
| ||
Bearing Steel | E52100 | 100Cr6 / 1.3505 | SUJ2 | √ | Bearing, Shafts |
-- | 100CrMn6 / 1.3520 | -- |
| ||
-- | 100CrMo7-3 / 1.3536 | -- |
| ||
Spring Steel | 5155 | 55Cr3 / 1.7176 | SUP9 |
| Springs |
6150 | 51CrV4 / 1.8159 | SUP10 |
| ||
9261 | 60CrSi7 / 1.7108 | -- |
| ||
Carbon Steel | 1010 | CK10 / C10E / 1.1121 | S10C |
| Shafts, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Came, Couplings etc. |
1020 | C22 / 1.0402 | S20C | √ | ||
1040 | CK40 / C40E / 1.1186 | S40C | √ | ||
1045 | CK45 / C45E / 1.1191 | S45C | √ | ||
1050 | CK50 / C50E / 1.1206 | S50C | √ | ||
1055 | CK55 / C55E / 1.1203 | S55C |
| ||
1064 | CK60 / C60E / 1.1221 | S58C |
| ||
High Speed Tool Steel | M2 | 1.3343 | SKH51 | √ | Reamer, |
M7 | 1.3348 | -- |
| ||
M42 | 1.3247 | SKH59 | √ | ||
M35 | 1.3243 | SKH55 | √ | ||
T1 | 1.3355 | SKH2 |
| ||
T15 | 1.3202 | -- |
| ||
T42 | 1.3207 | SKH57 |
