SAFETY INSTRUCTIONS
1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize loss.
3. The regulator is only suitable for lead acid batteries:OPEN,AGM,GEL it is not suited for nickel metal hydride,lithium ions or other batteries.
4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
Features:
1. Industrial-grade main control chip, 16-level AD sampling accuracy, accurate real-time display of temperature, charging current and discharge current, and the power generation is clear at a glance.
2, automatic focus MPP tracking charging, high charging efficiency, charging process does not pause detection, two-way focus tracking.
3, large-screen LCD display, adjustable charging and discharging parameters, ultra-wide charge and discharge adjustable, as long as you understand the battery characteristics set its corresponding charging parameters, you can charge any battery, the output can be adjusted when the power is off, more convenient ( There is no adjustment in the market).
4, complete 3-stage charge management, effectively protect the battery, the battery is more durable.
5, built-in overheating, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller automatically responds without damaging the device.
6, two-way moss tube placed in the irrigation circuit, high-power charging mode, ultra-low heat.
Our product is to track the current focus of the MPPT to adjust the
internal charging mode to maximize the conversion of light energy
into electrical energy. It is not the voltage tracking, the low voltage
or the high voltage is converted to the specific value of the constant
voltage to track the MPPT, so as not to cause misunderstanding TECHNICAL PARAMETER
MODEL | BL912A | BL912B | BL912C | BL912D | BL912E |
Batt voltage | 12V/24V auto | ||||
Charge current | 20A | 30A | 40A | 50A | 60A |
Discharge current | 10A | 10A | 20A | 20A | 30A |
Max solar input | 12V battery, the highest 23V; 24V battery when the highest 46V | ||||
Equalization | 14.4V | ||||
Float charge | 13.7V (defauhadjustable) | ||||
Discharge stop | 10.7V defaul,adjustable* | ||||
Discharge reconnect | 12.6 V(defaul,adjustable) | ||||
Charge reconnect | 13V | ||||
Voltage of open light | Solar panel 8V(Light lights delay) | ||||
Voltage of close light | Solar panel 8V(Light off delay) | ||||
USB output | 2 way USB output 5V/2.5A(MAX) | ||||
Self-consume | <10mA | ||||
Operating temperature | 35+60C | ||||
Size/Weight | 170 *92* 45mm / 450g |