Audited Supplier
PDVF-SF710
1 Year
Automatic
ABS
Die Molding
Electric
Computerized
1 Year
Blue and White
8477409000
200PCS/Year
1200mm
710mm
PUDI
Simple Packaging or Wooden Crates
Forming area: 710mm*1200mm
Dongguan
8477409000
Product Description
Parameters.
PD-SF710 Technical Parameters
| NO. | Technical specification | Technical Parameters |
| 1 | Maximum molding area | 710mm×1200mm |
| 2 | Minimum molding area | 420mm×300mm |
| 3 | Widest sheet | 740mm |
| 4 | Narrowest sheet | 460mm |
| 5 | Molding thickness | 0.2-2.5mm |
| 6 | Molding height | 180mm |
| 7 | Pulling accuracy | ±0.5MM |
| 8 | Length of upper furnace | 1250mm |
| 9 | Length of lower furnace | 1250mm |
| 10 | Total power of the upper furnace | 22KW |
| 11 | Total power of the lower furnace | 22KW |
| 12 | vacuum pumps | 5.5KW |
| 13 | drive motor | 10KW |
| 14 | Pull motor | 5.5KW |
| 15 | Total power of equipment | 68KW (Normal use of power:40-60KW) |
| 16 | vacuum volume | 200m3/h |
| 18 | Cooling method for product molding | 3HP water cooling (complimentary) |
| 19 | Total gas supply (external) | 0.6-0.8Mpa |
| 20 | power supply | 380V/50HZ(4+1 cable 50m²) |
| 21 | track | iron girder |
| 22 | Tab Chain | Double-row B-chain of KMC(Taiwan) |
| 23 | Total weight of equipment (reference) | 4.5T |
| 24 | Machine Size | 8000×1800×2500mm (Actual design prevails) |
Configuration parameters of PD-SF710
| No. | Name of Component | Brand & Description |
| 1 | PLC | Delta (Taiwan) |
| 2 | module | Delta (Taiwan) |
| 3 | touchscreen | 12 inch color touch screen(Taiwan) |
| 4 | converter | Delta (Taiwan) |
| 5 | Servo motor for sheet pulling | Delta (Taiwan) 5.5KW |
| 6 | Servomotor for molding up | Delta (Taiwan) 4.5KW |
| 7 | Servomotor for molding down | Delta (Taiwan) 5.5KW |
| 8 | Beam adjustment motor | TESECH(Taiwan) -0.75KW |
| 9 | Loading frame motor | TESECH(Taiwan) -0.75KW |
| 10 | Cutter motor | TESECH(Taiwan) -0.75KW |
| 11 | Intermediate moving motor | TESECH(Taiwan) -60W |
| 12 | Loading racks retrofitted with sprayed silicone oil | MeijiA-100 |
| 13 | Spraying anti-static on the outlet | MeijiA-100 |
| 14 | Temperature control module | Aoyi |
| 16 | pushbutton switch | Schneider (France) |
| 17 | relay | OMRON (Japan) |
| 18 | alternating current contactor | Schneider (France) |
| 19 | Thermal Overload Relay | Schneider (France) |
| 20 | Vacuum Angle Seat Valves | China |
| 21 | solenoids | AT&T(Taiwan) |
| 22 | air component | AT&T(Taiwan) |
| 23 | Precision Regulators | AT&T(Taiwan) |
| 24 | Speed control valves | AT&T(Taiwan) |
| 25 | cylinder | AT&T(Taiwan) |
| 26 | Pushbutton switch | OMRON(Japan) |
| 27 | Limit travel switches | OMRON(Japan) |
| 28 | Safety light curtains | FOTEK(Taiwan) |
| 29 | Sheet photoelectric sensors | FOTEK(Taiwan) |
| 30 | Linear guides | ABBA(Taiwan) |
| 31 | ball screw | ABBA(Taiwan) |
| 32 | timing pulley belt | GATES(America) |
| 33 | bearing | C&U(China) |
| 34 | Chain Gear | ZhengMeng(Taiwan) |
| 35 | vacuum pumps | Yuzhouxing AC200 0 |
| 36 | chiller | 3HP Industrial chiller |
| 37 | Upper Furnace Heating Brick | 6 rows*10 rows, 60 pieces 600W infrared ceramic heating bricks |
Product Description
PD-SF710 Automatic High Speed Servo Machine
Machine overview of PD-SF7101.PDSF-710 type vacuum suction servo molding machine, using microcomputer and industrial control programmable PLC control, the whole system HMI (Human Machine Interface). Chinese interface, the machine has a button operation and all the process parameters including setting and modification, so that the equipment is easy to operate and maintain.
2.Use: for HIPS, PS, PP, PVC, APET, PETG and other plastic sheet molding, processing of highly transparent, high stretch, shallow stretch, round, square, irregular, up and down the two-way stretching, flap and other products. Produce all kinds of food packaging, medical packaging, toy packaging, industrial packaging and other packaging products.
3.Machine body: welded or spliced with steel structure profiles, the overall steel structure frame has enough strength and rigidity. All metal surfaces are treated with antirust treatment and bottom sprayed with antirust paint; common and standardized parts are used in the structure, which is convenient for maintenance and replacement of all parts in the later stage.
4.The whole machine is divided into manual / automatic mode of operation, all the settings of the operation in the touch screen to achieve; when the operator will be placed in the material according to the automatic start equipment to complete a whole process of molding technology, manual is mainly used to change the mold or starting sample control.
Detailed drawing of the machine
The specificities of PD-SF7101.The machine selects PLC control, can operate all functions in the touch screen.
2.Pulling piece using servo motor control, can be adjusted to different speed or length, faster, accurate, stable, and at the same time with the material exit function, to avoid material waste.
3.Mold table lifting is driven by servo motor, can be independently divided into rising and falling, to meet the different heights of products, to the fastest speed production.
4.The electric furnace adopts voltage temperature control, which makes the temperature more moderate, easy to control and low power consumption.
5.Built-in water transportation cooling system with chiller cabinet cooling molding, while equipped with heat insulation board, beam water transportation, more quickly.
6.Equipped with product number counting function.
7.The production efficiency is about 10 seconds cycle.
8.PLC program has been set up in 100 groups of memory system, the user can be related to the production of parameters downloaded in the memory file, to be repeated when the production is taken out to use, convenient and time-saving.
9.Product cooling is air-cooled and spray cooling, which can be chosen at will.
10.Mold change time is very short, 5-10 minutes.
Energy interface (provide if needed)
1.Electricity: three-phase five-wire 380V.
2.Gas: 1 inch compressed air interface, pressure 0.6-0.8MP.
3.Customers provide their own air storage tanks, air compressors and cold dryers.
Applicable scenarios
This vacuum forming machine is an efficient and multifunctional blister forming equipment, specially designed for the production of disposable packaging boxes, coffee cup lids, plastic trays and other products. Using advanced vacuum forming technology to /ensure product quality and consistency.PUDI MACHINERY
Dongguan Pudi Machinery Equipment Co., Ltd. is a professional vacuum forming machinery series equipment manufacturer focusing on R&D, design, manufacturing, sales and service. Pudi Company was founded in 2005. After nearly 20 years of R&D and production of vacuum forming machine equipment , we have continuously pursued innovation. Our company's professionals are committed to providing customers with excellent solutions and helping customers achieve innovation and efficiency in various fields. Production.Certificates and Logistics
Pudi Machinery Equipment Co., Ltd. has demonstrated its profound technical foundation and professional strength in the field of vacuum forming machines. The company has 16 patent copyrights and is in a leading position in the industry's innovation capabilities. Pudi Machinery Equipment Co., Ltd . has not only made remarkable achievements in technology research and development, but also obtained relevant professional certificates. These certifications further prove the high standards and quality assurance of the company's products.Logistics and transportation
To meet our customers' needs, we promise unparalleled responsiveness and professional support. No matter in any weather conditions or at any time of the day, once the machine is manufactured, we will immediately start the assembly and delivery process to ensure that our customers' Urgent needs are met as quickly as possible. We understand that rapid response is not only a reflection of our services, but also a commitment to our customers. We insist on providing customers with an all-weather, barrier-free service experience in an efficient and responsible attitude to ensure the maximization of customer interests.
OUR EXPERTISE ,YOUR ADVANTANGE
1.Professional Technical Team :20 years of R&D and production experience,with rich experience in vacuum moulding technology.
2.Non-standard customised service : Provide one-stop service to provide customers with excellent complete vacuum forming solutions.
3.Quality assurance and reliability : All mechanical parts are produced independently by CNC machining centre.
4.Worry free after-sales service : Integration of installation ,commissioning and training services.
Pudi service standard
Pre-sales service
1. According to the customer's products to provide customers with a reasonable program, plastic absorbing machine and peripheral equipment investment ratio.
2. Provide the amount of water, electricity and gas needed for the production workshop.
3. Provide reasonable workshop planning program.
4.Provide the mold manufacturers and material manufacturers for plastic injection molding.
The sale of services
1. In order to improve the subsequent production efficiency of the customer, the customer's existing molds or re-development of the mold planning proposals.
2. After the completion of the production of equipment, responsible for the installation, commissioning, training. And assist the operator to produce the ideal products.
3. Provide good production suggestions to customers who have just entered the plastic absorbing industry, and reduce customers' production costs.
After-sales service
1. One year warranty for the whole equipment, and the parts can be exchanged for new ones within one year (except for man-made damages and wearing parts).
2. Lifetime maintenance of the equipment, after the warranty period only charge the cost of materials, such as the need for door-to-door service only charge a reasonable travel expenses.
3. For all the customers who have purchased Pudi's equipment, we will make after-sale visits from time to time.
We can customise any model, if you are interested in our machines, please feel free to contact me.
