Pure magnesium is used as alloy to increase tensile strength both in aluminium wrought and cast alloys. Pure magnesium is also added when producing pre-alloys for the treatment of nodular cast iron. The chemical industry uses magnesium to produce Grignard reagents, and it is also used in the inorganic field. Magnesium is an excellent reducing agent widely used in metallurgy.
Magnesium is delivered in an array of 99.70 to 99.98% of purity allowing our customers to make the best possible and cost-optimized selection for the required field of application.
End pieces are the remainders of pure Mg ingots from powder production having the identical chemical composition as the pure Mg ingots. Due to their geometry, end pieces melt faster allowing for fast corrections to obtain the given final chemical composition.
Magnesium alloys

Standard:
Designation | Chemical compositions % | |||||||||||
Mgz>= | Fes≤ | sis≤ | Nis≤ | Cus≤ | Al≤ | Mns≤ | Tis≤ | Pbs≤ | Sns≤ | Zns≤ | Other | |
Mg9999 | 99.99 | 0.002 | 0.002 | 0.0003 | 0.002 | 0.002 | 0.002 | 0.0005 | 0.001 | 0.002 | 0.003 | - |
Mg9998 | 99.98 | 0.002 | 0.003 | 0.0005 | 0.004 | 0.004 | 0.002 | 0.001 | 0.001 | 0.004 | 0.004 | - |
Mg9995A | 99.95 | 0.003 | 0.006 | 0.001 | 0.002 | 0.008 | 0.006 | - | 0.005 | 0.005 | 0.005 | 0.005 |
Mg9995 B | 99.95 | 0.005 | 0.015 | 0.001 | 0.002 | 0.015 | 0.015 | - | 0.005 | 0.005 | 0.01 | 0.01 |
Mg9990 | 99.9 | 0.04 | 0.03 | 0.001 | 0.004 | 0.02 | 0.03 | - | - | - | - | 0.01 |
Mg9980 | 99.8 | 0.05 | 0.05 | 0.002 | 0.02 | 0.05 | 0.05 | - | - | - | - | 0.05 |
Cd.Hg,As,Cr6+ element,The supplier does not make routine analysis, but should monitor its contentrequire o(Cd+Hg+AS+Cr)40.03% |






1.How can I get your offer?
You can leave us a message, and we will reply to each message in time. Ot we can tak online through Trademanager.
2.Can you deliver the goods on time?
Yes, we guarantee the best quality products and punctual delivery. Integrity is the tenet of our company.
3. Can l get samples before Il place an order?
Yes, of course.Usually our samples are free,we can produce according to your sample or technical drawing.
4.What are your payment terms?
Our usual terms of payment are 30% down payment and the balance against BIL.Aletter of creditis also acceptable.exw FOB,CFR,CIF.
5. Do you accept third-party inspection?
Yes, we absolutely accept it.