Audited Supplier
Electromagnetic Flow meter
Nominal diameter 3-3000mm
Velocity range 0-10m/s
Degree of accuracy ±0.5%R,±1%R
Medium conductivity ≥5uS/cm, Actual conductivity≥20uS/cm
Nominal pressure(hight press 0.6MPa 1.0Mpa 1.6MPa 2.5MPa 4.0MPa
DN700-DN3000 DN200-1000 DN15-DN600 DN15-DN150 DN15-DN150
Ambient TemperatureRanges fission-10~+60º
Lining Material: Chloroprene rubber (CR),80ºC
Polytetrafluoroethylene(PTFE/F4),120ºC
Fluorinated ethylene propylene (FEP/F46),140ºC; PFA,180ºC
Polyurethane(PU),80ºC
Electrode Material: 316L Stainless Steel, Hastelloy B/ C , Ti, Ta, Pt
Output signal: Current (4-20mA), pulse, frequency Serial
Communications: RS-485, support standard Mudbus protocol; GPRS, HART
Flange standard: GB.ANSI150, DIN
Power supply: 220VAC/24VDC/Lithium battery
Protection class IP65/IP67/IP68
Parameter:
Measuring Medium | Liquid (single-phase medium or can be considered as a single-phase medium) |
When the dryness of saturated steam is ≥85%, it can be considered as a single-phase medium | |
Medium Temperature | -40ºC~+200ºC |
Medium Pressure | 1.6Mpa; 2.5Mpa; 4.0Mpa (Other pressure can be customized) |
Accuracy | 1.0%(flange); 1.5% (insertion) |
Measuring range Ratio | 1:10(Standard air condition as reference) 1:15(Liquid) |
Velocity Range | Liquid: (0.4~7)m/s; Gas: (4.0~60)m/s; Steam: (5.0~70)m/s |
Pipe Diameter Range | DN15-DN300(Flange), DN80-DN2000(Insertion), DN15-DN100(Thread), DN15-DN300(Wafer), DN15-DN100(Sanitary) |
Material | SS304(Standard), SS316(Optional) |
Pressure Loss Coefficient | Cd≤ 2.6 |
Vibration Acceleration Allowed | ≤0.2g |
Power Supply | DC24V or 3.6V battery power |
Protection Class | IP65 |
IEP /ATEX | II 1G / Ex ia IIC T5 Ga |
Environmental Conditions | Ambient temperature: -40ºC~55ºC |
Relative humidity: ≤85% | |
Atmospheric pressure:(86~106) KPa | |
Output Signal | Pulse frequency signal2-3000Hz, Low level≤1V, high level≥6V |
Two-wire system 4~20mA signal(isolated output), Load≤500 |
Q: If the flowmeter can be used to measure chemical solutions?A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition
and concentration and according to this can we finally confirm the what lining and electrode materials are available.
Q: Which industries are the flowmeter used?
A: The flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment,
pharmaceutical, food, biological, fine chemical industry, etc.
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.
Q: Are you trading company or manufacturer ?
A: We are factory and has manufactured various flowmeters over 14years.
Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2~4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.
Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.
Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.
