Audited Supplier
FIBRIDGE F6-5800-E530 series layer3 switch(below quote as E530) is a high-performance switch is built based on Ethernet switch IC CTC7132, support multiple ports. With CentecOS system software, E530 supports mainstream protocol standard and application program for convenient deployment and management. The series applies localization self-controllable design solutions. The switch applies 1U19'' chassis, with fans for heat radiation.
The chassis applies AC 100-240V or DC -40--60V power supplies. Its working temperature is 0ºC~+45ºC, humidity is 10%~90%(no condensation).
Support straight mode and storage-and-forward mode.
Support complete L2/L3 characters
Support NVGRE/ VXLAN/ GENEVE,Tunnel Routing & Bridging
Support STP/RSTP/MSTP/ELPS/ERPS/VRRP
Support VLAN, Por/MAC VLAN, QinQ
Support static configuration and dynamic learning, black hole MAC
Support static routing, RIP, OSPF, BGP, IS-IS, URPF, equal value routing
Support VRF,cross VRF ARP divulge
Support ICMP, ECMP, PIM;
Support LDP, VPWS, VPLS, L2VPN/L3VPN, MPLS;
Support QoS, flow management, speed rate limit;
Support PFC, DCBX
Support AAA,prevent DDos support RADIUS/TRCACS+, COPP;
Support port isolation, port security, IP+MAC+ port bunding
Support mirror analysis, Elephant Flow detection, burst flow/dynamic delay monitor and analysis
Support ACL;
Support iStack
Support IPv4/IPv6;
Support based on IEEE802.1X flow control
Support Web, SNMP, CLI, Telnet, SmartConfg management
Support NVGRE, VXLAN, GENEVE, SDN, EVPN, IPFIX;
Support LLDP;
Support link aggregation, cross device link aggregation
Based on port and based on MAC 802.1x certificate
Obtain network qualification certificate
| Network Characteristics | |
| Ethernet Protocol | Support IEEE802.3/802.3u/802.3x/802.3Z/802.3AB storage and forward |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Network Interface | 1000MBase-FX SFP optical port 10GBase-FX SFP+ optical port 25GE QSFP optical port 40GE QSFP+ optical port 100GE QSFP28 optical port Ethernet port: 10/100/1000MBase-T(X)auto adaptive Ethernet RJ45 port |
| VLAN | 802.1Q standard VLAN |
| MAC Addresses | 96K |
| Jumbo Frame | Max 9600Bytes |
| Cache | 9MB |
| Packet Buffer | 880G |
| Packet Forwarding Rate | 476.16Mpps |
| Management | Web, SNMP V1/V2/V3, Console, Telnet |
| Optical Characteristics | |
| Optical Interface | SFP+ |
| Fiber Core Count | Simplex/duplex |
| Wavelength | 1310nm/1550nm(850nm) |
| Fiber Mode | SM/MM |
| Environmental Characteristics | |
| Temperature & Humidity | Working temperature: 0ºC~50ºC Storage temperature: -20ºC~70ºC Working humidity:10%~90% RH No condensation Storage humidity:5%~95% RH No condensation |
| Power | AC 100-240V/50-60Hz embedded switch power DC-40--60V external power supply |
| MTBF | ≥100000 hours |
| Hardware Configuration | |
| Expanding sub-card | None |
| Serial port type | 1 RJ45 type serial port |
| Out-band management port | 1 RJ45 out-band management port |
| In-band management port | Support |
| USB port | 1 standard USB port |
| Model | Description | Dimension | Weight | Management |
| F5E300XC-242 | 24 x 10GE SFP+ port 2 x 100GE QSFP28 port | 4.4 x 44.2 x 37.8 cm | 5.95 kg | WEB, SNMP, CLI |
| F5E300XQ-242 | 24 x 10GE SFP+ port 2 x 40GE QSFP+ port | 4.4 x 44.2 x 37.8 cm | 5.95 kg | WEB, SNMP, CLI |
| F5E300TX-484 | 48 x 1GE Base-T port 4 x 10GE SFP+ port | 4.4 x 44.2 x 37.8 cm | 6.10 kg | WEB, SNMP, CLI |
| F5E300SX-484 | 48 x 1GE SFP port 4 x 10GE SFP+ port | 4.4 x 44.2 x 37.8 cm | 6.25 kg | WEB, SNMP, CLI |
| F5E300TX-248 | 24 x 1GE Base-T port 8 x 10GE SFP+ port | 4.4 x 44.2 x 24.5 cm | 3.60 kg | WEB, SNMP, CLI |
| F5E300TXYQ-16882 | 16 x 1GE Base-T port 8 x 10GE SFP+ port 8 x 25GE QSFP port 2 x 40GE QSFP+ port | 4.4 x 44.2 x 37.8 cm | 6.10 kg | WEB, SNMP, CLI |
| F5E300PX-484 | 48x1GE Base-T port support P o E 8 0 2.3 a f/ a t 4x10GE SFP+ port | 4.4 x 44.0 x 36.0 cm | 6.55 kg | WEB, SNMP, CLI |
| F5E300PX-244 | 24x1GE Base-T port 4x10GE SFP+ port | 4.4 x 44.0 x 36.0 cm | 5.55 kg | WEB, SNMP, CLI |
| F5E300TX-412 | 4 x 1GE Base-T port 12 x 10GE SFP+ port | 4.0 × 44.0 × 22.0 cm | 2.80 kg | WEB, SNMP, CLI |
| F5E300QC-62 | 6 × 40GE QSFP+ port 2 × 100GE QSFP28 port | 4.4 × 21.5 × 35.5 cm | 3.30 kg | WEB, SNMP, CLI |
| F5E300MYQ- 4842 | 48 × 2.5GE Base-T port 4 × 25GE SFP28 port 2 × 40GE QSFP+ port | 4.4 × 44.2 × 37.9 cm | 4.10 kg | WEB, SNMP, CLI |
| F5E310MYQ- 4842 | 48 × 2.5GE Base-T port 4 × 25GE SFP28 port 2 × 40GE QSFP+ port | 4.4× 44.2 × 29.0 cm | 4.10 kg | WEB, SNMP, CLI |
| F5E310TYQ- 4842 | 48 × 1GE Base-T port 4 × 25GE SFP28 port 2 × 40GE QSFP+ port | 4.4× 44.2 × 29.0 cm | 4.10 kg | WEB, SNMP, CLI |
Price is FOB Beijing. 1 year warranty.
MOQ: 1 unit
Lead time: 3-5 working days after receiving payment. Please contact us for bulk order.
Fibridge Advantages:
1. Established in 1995; 28 years' experience tells our reliability and high reputation.
2. Full product series, including Industrial Switch, optic telecommunication and Video surveillance series.
3. Products have been exported to more than 110 countries.
4. Successful application of Industrial switch in Railway, Metro, Smart city, Highspeed road, etc.
