Audited Supplier
The new central axis midtop transport ambulance is modified with the new new central axis model launched by Jiangling Ford. With a Ford 2.0TEco Boost GTDI gasoline engine, All the standard cruise system, Central control large-screen reversing image, With a comprehensive active + passive safety protection system, Up to 170 km/h per hour; Using the ABS + EBD technique, Ability to proactively detect and analyze road conditions, Reasonable adjustment of the driving direction; Using the domestic leading boron steel plate, High-steel chassis, integrated casting, Multiple beams increase strength; the overall body weight is low, more stable, Effectively ensure the safety of drivers; Wide medical cabin space, Reasonable design; The whole vehicle adopts the domestic leading medical vehicle modification technology, Suitable for all kinds of hospitals and emergency centers, Especially suitable for patients to transfer and city first aid.
Medical warning appearance | |
Bodywork | Using steel reinforced frame structure design, safe and reliable. The right side of the car body is equipped with a sliding door, and the rear end is equipped with a double open tail door structure, and the opening width is large, which is convenient for the doctor and patient personnel and stretchers. |
Vehicle appearance | The whole body is white, the front, both sides and the rear door of the Red Cross logo, all around the body color strip, bright color, eye-catching, effective warning. Medical cabin glass paste 2 / 3 frosted cellophane, effectively protect patient privacy. |
Warning lamp | Streamline integrated LED alarm light assembly (polymer material injection molding), alarm horn power 100W, wire-controlled controller, equipped with LED lamp set. Blue flashing lights are installed on both sides and on the tail for effective warning. |
Medical cabin ambulance facilities | |
Ambulance system | Automatic car stretcher: all-aluminum alloy profile skeleton, comfortable soft stretcher mattress, light and strong, bearing 181kg, convenient, stable and easy up and down. The medical cabin has two suspended infusion bottle holders on the top, with a load-bearing capacity of 2.5kg, beautiful shape and reliable quality |
Medical oxygen-based control system | The rescue compartment is equipped with an oxygen tank cabinet with two 10L steel oxygen cylinders, nominal pressure of 15 MPA (light weight, easy to load and replace), and equipped with two single table pressure reducing valves, two German oxygen terminals, a ventilator interface and a wall oxygen inhaler. The patient can control the oxygen amount when oxygen inhalation, and equipped with humidified bottles to provide the patient with moist oxygen, more conducive to the patient oxygen inhalation. |
| Medical appliances system | |
| Headlamp | 412V cabin lights, with stable light source and large irradiation surface. |
Dc-to-ac converter | Con-board sine wave 500W, stable frequency, stable voltage, stable output power, provide power supply for vehicle equipment; 2 groups of 220V / 12V multi-function socket (can be connected to two / three holes, AC / DC). |
| Disinfection lamp 1 intelligent and regular ultraviolet ray disinfection, to ensure the health and safety of the cabin. | |
| Air circulation system | |
| 1 set of rear air conditioning and rear heating device, independent control of heating and cooling, according to the need to reasonably regulate the cabin temperature. | |
| Medical cabin cabinet interior configuration | |
Midpartition wall assembly | The new environmental protection material (light weight, environmental protection, can be used twice) will be installed between the cab and the medical compartment, which separate the front and rear carriages, and an observation window is provided on the partition wall for easy observation and communication. |
2nd generation (1992-2014) : E-350/E-450 chassis introduced modular design, allowing modification plants to achieve free combination of medical cabin lengths (5.4m-7.3m)
third generation (2015-present) : The Transit series adopts full-bearing body, which reduces the maintenance quality by 23% and improves fuel efficiency by 19%
vibration control : Through the hydraulic bushing of the subframe + the vibration isolation platform of medical equipment, the vibration level in the cabin is less than 0.5g (to meet the operating standards of CT equipment)
electromagnetic compatibility : The whole vehicle electromagnetic shielding coating is adopted to ensure that the false trigger rate of the on-board electronic system is <0.01% when the defibrillator is working
Space Revolution : The E-450 Super Duty can accommodate four sets of stretchers or 12 transfer seats with a clear cabin height of 1.9 meters
equipment integration : standard dual AC inverter (5000W), medical grade compressed air system (8CFM@50PSI)
Human factor project : 45° tilt nursing seat in accordance with NFPA 1917 standard, reducing the risk of lumbar strain of medical staff
Quanshun PHEV in London : Battery life of 50km in pure electric mode, to meet the needs of ULEZ emission zone operation, operating costs decreased by 34%
Alpine Rescue refit : Swiss version adds central charging and venting system, improves tyre grip by 62% on 30° snow slopes
digital twin system : real-time monitoring of chassis stress distribution, predicting the probability of failure of key components
V2X first aid channel : linkage with traffic lights to improve road priority efficiency by 13%
AR navigation system : HUD projects the optimal admission path to shorten the time of emergency department handover
Medical cabin interior decoration | The original car interior, a single seat on the right side of the rear cabin, a long cabinet, blue blue imitation leather, the seat is comfortable, the car is equipped with a safety hammer, to ensure the safety of the car members in an emergency. |
Cabinet assembly | On the left side of the medical cabin, install a set of long equipment cabinet made of new environment-friendly materials. The cabinet is equipped with space cabinet and other storage space. The medical equipment can be placed on the surface of the cabinet, with large capacity, simple and beautiful; In front of the long equipment cabinet, there is a set of oxygen tank made of new environmental protection materials, and the cabinet can accommodate 210L oxygen tank. |
Medical floor | Using the new light body ground decoration material (light weight, environmental protection, can be used twice), the floor is waterproof, anti-corrosion, wear-resistant, antibacterial, convenient for the cleaning and finishing of medical staff. |
| Accessory equipment | |
| Grab rail | Install 1 long strip handrail on the top of the medical bay. |
| Fire extinguisher | Place a 1 KG fire extinguisher on the rear left side of the medical cabin. |
| Long bar cabinet | On the right side of the medical cabin, install a set of long cabinet, blue leather, and two-point safety belt. |
| Configure the name | Model / figure number | Main functions / technical parameters | unit | number | Remark | |
| Ambulance system | ||||||
| Stretchews and instruments | ||||||
| 1 | Automatically get on a stretcher | Bearing capacity:181KG | pcs | 1 | ||
| 2 | Infusion gripper | Bearing capacity: 2.5 KG | pcs | 2 | ||
| Oxygen supply facilities | ||||||
| 1 | oxygen cylinder | 10L | Steel, nominal pressure of 15 MPA | pcs | 2 | |
2 | Oxygen inhalator | The oxygen interface is a two-stage roller needle self-locking structure, which can effectively protect the oxygen and scale humidified bottle | PCS | 1 | ||
| 3 | Ventilator interface | Quick plug-in type | pcs | 1 | ||
| 4 | Pressure regulating valve | Single table type | pcs | 2 | ||
| Appearance, and warning system | ||||||
| Warning lamp | ||||||
| 1 | Front roof burst flash alarm lamp assembly | LED | Horn power is 100W | pcs | 1 | |
| 2 | Flash lights | LED | DC12V | pcs | 6 | |
| Color strip and logo | ||||||
| 1 | Ambulance sign | Reflective film | Bright color, eye-catching, effective warning | pcs | 5 | |
| 2 | Body color strip | Reflective film | Bright color, eye-catching, effective warning | pcs | 1 | |
| 3 | Grind film | 2 / 3 Size | Right and back door | pcs | 1 | |
| Electrical system | ||||||
| Power configuration | ||||||
| 1 | Dc-to-ac converter | 500W | pcs | 1 | ||
| 2 | Crop / DC socket | Plate connector | AC / DC dual-use socket | pcs | 2 | |
Founded in 2006, Cheng Li special Automobile Co., LTD. is a top package equipment solution provider in China, especially for Commercial Vehicle, Engineering Machinery, construction machinery, agricultural machinery, parts and so on
We Ulike industry are always committed to offer our customers high quality products with reliable performance, competitive price and comprehensive services, to ensure every engineering project to be run smoothly on schedule. With over Fifteen years' experience in the field of Commercial Vehicle, Engineering Machinery, construction machinery, agricultural machinery and accompanying to fulfill strictly ISO 9001: 2008 standard, we had established and have been consistently keeping good business relationship with many general contractors, civil engineering firms and construction companies throughout the world.
We Ulike industry participated as package equipment provider previously include airport projects in Africa, power plant projects in Middle East, dredging projects in South America, highway projects in Oceania, rural and municipal road projects in Southeast Asia, and we are still achieving more and more projects at present. To provide reliable products with quick delivery time, to make prompt reaction for spare parts and after-sales services, to visit the users field regularly for local training and maintenance, Ulike industry has been often praised by our customers and has taken great reputation as a trustworthy project partner. Ulike Inductry believe in combining our own achievement together with our customer benefits. Open communication, effective planning and elaborative preparation always commit us to execute and deliver our promises for our customers all over the world.
1. What are your terms of payment?
Our payment terms are simple: We require a T/T with a 30% deposit upfront. The remaining 70% balance must be settled before delivery.
Rest assured, we will provide you with detailed photos of the products and their packaging before you make the final payment.
2. What is the minimum quantity for an order?
The minimum order quantity is just 1 set.
3. How are your products packed?
Our products are packed naked, and we transport them using bulk cargo carriers, ro-ro, or 40/45 HQ containers, or via land transportation.
4. What is your delivery time?
Typically, our delivery time is 25 working days after receiving a 30% T/T down payment. The exact delivery time may vary based on product specifications and order quantity.
5. How can I judge the quality of your products?
We will provide photos and videos of the products and trading orders. Additionally, you are always welcome to visit our factory to inspect the quality in person.
6. Why should I trust and choose your company?
-- We offer a comprehensive production line, from trailer design to delivery.
-- We are certified with ISO 9001: 2008 and CCC quality standards.
-- We use 100% genuine brand spare parts, as per your requirements.
-- We accept and fulfill customization requests.
-- We are trusted by clients from regions including Africa, Australia, South America, and Indonesia.
-- We provide flexible payment terms, including T/T, L/C, and others.
7. Can I customize the painting and the logo?
Absolutely, we can customize the logo for any type of product.
