Audited Supplier
Customized Industrial Electrostatic Spray Line Manual Powder Coating System Painting Machine
Customized Industrial Electrostatic Spray Line Manual Powder Coating System Painting Machine, consisting of a pass-through spray booth, a pass-through oven and a conveyor system. It's more suitable for long and flat workpieces such as aluminum proflie. When the powder coating work is completed, there is no need to load and unload the workpiece, and only need to manually pull the sprayed workpiece into the oven through the overhead conveyor.
| Powder coating line type | Manually |
| Powder coating booth type | Tunnel spray booth with filter powder recovery system |
| Powder coating oven | Gas/LPG/Diesel/Electric oven |
| Conveyor | Overhead tracks |
COLO-191S Powder Coating Machine Gun
COLO-191S manual powder coating machine gun is developed for easy and efficient job, suits for both beginners and specialists. Based on COLO advanced technology, especially complex parts can be perfectly coated with this model.
Configurations and Features
1. Applies latest technology allows precise setting electric and pneumatic parameters. The flexible control helps operators find the optimal data for each part, each powder.
2.There are 3 pre-set application programs stand for flat parts, profiles and re-coating, as well as 20 personalized programs.
3. 100kv manual spray guns delivers high transfer efficiency that saves powders.
4. 60lbs fluidizing powder hopper allows big continuous production, which is welled sealed to avoids powder damp and contaminated.
5. Flexible trolley with wheels can be moved everywhere.
COLO Pass Thru Powder Spray Booth
This pass thru powder coating booth has 2 working station allows parts recieving coating from both side, parts enter the booth from one entrance and exit from the other through conveyors, continuous coating increases efficiency and ensures application quality.
Configurations & Features
1. The recovery module combines a group high-precision filters made of 100% polyester that maximize separating efficiency.
2. Pulse jet device provides interval filters cleaning, effectively eliminates powder accumulation and prolongs filters' useful life.
3. Full parameters and functions can be handled on the PLC panel, such turning on / off fan, setting pulse-jetting time and interval, light on/off, emergency stop etc.
4. A collection hopper beneath the filter stage ensure the collected overspray powders are clean, and can be easily taken away for recycling.
5. Simple installation - only electrical and air connections are required to start production.
Specifications
| Model | COLO-S-3212 |
| Operating Dimensions | Width620 * Depth2920 * Heght1500mm |
| Overall dimensions | Width1200 * Depth3000 * Heght2033mm |
| Weight | 500kg |
| Power Supply | 220V/380V, 3Phase, 50-60HZ |
| Fan Power | 4kw |
| Filter Count | 6 pcs, Quick-release Type |
| Filter Material | Polyester |
| Filter Cleaning | Pneumatic |
Track Powder Coating Oven
This powder coating oven installed with overhead track system is designed to carry heavy materials into the oven for continuous production, can be heated by electric, gas or diesel as required. Our powder coating ovens features environmental friendly, reducing operating cost and curing more parts everyday.
Configurations & Features
1. PLC system provides a precise and reliable heating process with easy setting of temperature and time.
2. Itatly Riello burner fully burns fuels, quickly reach to required temperature saving your production time everyday.
3. Circulation fans causes uniform temperature in the entire inner space that results in quality cured finishes.
4. 100 mm thickness rockwool board inserted between galvanized steel wall and durable steel skin always keeps the chamber a consistent high temperature with minimum heat loss.
5. It is recommended to take gas or diesel as fuels, which fearures higher heating efficiency and lower energy expense.
Specifications
| Model | COLO-7021 |
| Worksize Dimensions | Width1800 * Height2100 * Depth7000 mm |
| Overall Dimensions | Width2000 * Height2400 * Depth7200 mm |
| Power Supply | LPG / Gas / Diesel |
| Voltage/Frequency | 380V/220V (50-60Hz) |
| Warm-up Time | 15-30 min. (180° C) |
| Temperature Stability | < ± 3.0-6°C |
| Temperature | Max. 250° C |
| Transport System | Two trolleys |
| Burner | Italy Riello, 20,0000cal |
| Circulation/ Air flow | Vertical ,Variable through holes on the walls |
| Ventilation Performance | 8288-16576m3/h |
| Motor Power | 5.5kW |
| Warranty | 12 months |
Different type of powder coating line solution. We have more then 10 years professional engineer that can design a best line solution based or according to your supplied information.
We are a typical Chinese supplier and specialized in the research, development and production of powder coating line equipment, such as powder coating line, powder coating gun, reciprocator, powder coating booth, powder coating oven,sandblasting machine etc. We also supply various kinds of powder coating spare parts to our customer. We insist in offering superior quality products and efficient service.
We commited to your satisfactory and safety, if you are interested in our products,please feel free to contact us,thank you!
We are sincerely looking to cooperate with you! Please feel free to contact us if you like our products.
