Audited Supplier
BH 2600*6600
1 Year
≥15 Years
CE, ISO
380V
Horizontal
New
Automatic
Twin-Screw
Pyrolysis
Water-Cooling
8t/H
Motor Driven Internal Gear Drive
<85dB
Intermittent Opreation
Batch/Intermittent/Semi-Continuous/Continuous
Longyuan Baihong
Wooden Package
2200*6600
China
8419409090
Product Description
Company Profile
Our Qingdao Longyuan Baihong Machinery Equipment Co., Ltd is a big manufacturer for Pyrolysis Equipment for 22 years in China. We located at Qingdao-----a beautiful and Industry developed city. We established in year 1997, our main products are environment pyroloysis equipment. The company has passed ISO9001 certification, CE certification and SGS international third party certification. To the overall design, production and manufacturing, installation and commissioning, technical training, after-sales service in the whole industrial chain operation of high-tech enterprises.
Product Description
The whole tire is transported to the pyrolysis reactor through the loading module, the lid is automatically locked and sealed, and then the whole tire is pyrolyzed; after the pyrolysis treatment, the oil vapor is distilled, and the oil and gas pass through the light and heavy oil and gas separation device. Oil and gas enter the condensing system, the liquefiable part is condensed into tire oil, and the non-liquefiable part is input to the heating system for combustion through the gas purification system. After the oil and gas pyrolysis process is completed, the remaining carbon black and steel wire are automatically discharged through a fully enclosed automatic slag discharge system.
Equipment advantages:
1. The pyrolysis reactor adopts the structure of heat storage body to fully recycle waste heat, which can't only extend the
service life of the main furnace, but also save fuel.Thus further saving production costs
2. Special high-temperature proof approved pot is used for the reactor.
3. The equipment is equipped with infrared blocking warning and dredging device, which can detect the phenomenon of pipeline blockage in the production process and automatically solve the problem of blockage, so as to ensure that there will be no safety problem due to pipeline blockage in the production process.
4. Double cycle structure is adopted in the deslagging system, which controls the deslagging time in about 2 hours.The slag is quickly cleaned.
5. Adopt a new exhaust gas purification system to make the gas discharged after purification meet the relevant national emission standards
6. After dehydration, sulfur removal and impurity removal in the purification system, the excess combustible gas is compressed by a special gas compressor and stored in a gas storage tank. It can be used for heating later, or supplied to gas-fired generators for use or sale.
7. Add convection vents and rapid cooling devices to the main furnace, so that the temperature of the main furnace can be reduced to below 100 degrees in 2 hours.
1. Raw Material
Our Qingdao Longyuan Baihong Machinery Equipment Co., Ltd is a big manufacturer for Pyrolysis Equipment for 22 years in China. We located at Qingdao-----a beautiful and Industry developed city. We established in year 1997, our main products are environment pyroloysis equipment. The company has passed ISO9001 certification, CE certification and SGS international third party certification. To the overall design, production and manufacturing, installation and commissioning, technical training, after-sales service in the whole industrial chain operation of high-tech enterprises.
Product Description
The whole tire is transported to the pyrolysis reactor through the loading module, the lid is automatically locked and sealed, and then the whole tire is pyrolyzed; after the pyrolysis treatment, the oil vapor is distilled, and the oil and gas pass through the light and heavy oil and gas separation device. Oil and gas enter the condensing system, the liquefiable part is condensed into tire oil, and the non-liquefiable part is input to the heating system for combustion through the gas purification system. After the oil and gas pyrolysis process is completed, the remaining carbon black and steel wire are automatically discharged through a fully enclosed automatic slag discharge system.
Equipment advantages:
1. The pyrolysis reactor adopts the structure of heat storage body to fully recycle waste heat, which can't only extend the
service life of the main furnace, but also save fuel.Thus further saving production costs
2. Special high-temperature proof approved pot is used for the reactor.
3. The equipment is equipped with infrared blocking warning and dredging device, which can detect the phenomenon of pipeline blockage in the production process and automatically solve the problem of blockage, so as to ensure that there will be no safety problem due to pipeline blockage in the production process.
4. Double cycle structure is adopted in the deslagging system, which controls the deslagging time in about 2 hours.The slag is quickly cleaned.
5. Adopt a new exhaust gas purification system to make the gas discharged after purification meet the relevant national emission standards
6. After dehydration, sulfur removal and impurity removal in the purification system, the excess combustible gas is compressed by a special gas compressor and stored in a gas storage tank. It can be used for heating later, or supplied to gas-fired generators for use or sale.
7. Add convection vents and rapid cooling devices to the main furnace, so that the temperature of the main furnace can be reduced to below 100 degrees in 2 hours.
| No | Working Item | Batch Type pyrolysis plant | ||||
| 1 | Model | BH-B5 | BH-B8 | BH-B10 | BH-B12 | |
| 2 | Raw material | Waste tires, waste rubber, waste plastic, waste acrylic, sludge, household garbage | ||||
| 3 | 24-hour Capacity | 5 | 8 | 10 | 12 | |
| 4 | 24-hour oil production | T | 2.4 | 4 | 4.4 | 4.8 |
| 5 | Heating Method | Direct heating | Direct heating | Direct heating | Direct heating | |
| 6 | Working Pressure | Normal pressures | Normal pressures | Normal pressures | Normal pressures | |
| 7 | Cooling Method | Water-cooling | Water-cooling | Water-cooling | Water-cooling | |
| 8 | Water consumption | T/h | 4 | 6 | 7 | 8 |
| 9 | Noise | dB(A) | ≤85 | ≤85 | ≤85 | ≤85 |
| 10 | Total weight | T | 20 | 26 | 27 | 28 |
| 11 | Floor space (Pipe coil) | M | 20*10*5 | 20*10*5 | 22*10*5 | 25*10*5.5 |
| 12 | Floor space(tank) | M | 27*15*5 | 27*15*5 | 29*15*5 | 30*15*5.5 |
1. Raw Material
2. Final Products
| NO. | Name | Percentage | Usage |
| 1 | Tyre oil | 45% | * can be sold directly. * make diesel and gasoline by use oil distillation machine. * can be as fuel. |
| 2 | Carbon black | 30% | * can be sold directly. * make fine carbon by use carbon black refining machine. * make pellet by use carbon make pellet machine. |
| 3 | Steel wire | 15% | * can be sold directly. * make steel bloom by use hydraulic press-packing |
| 4 | Oil gas | 10% | * can be as fuel burn by use gas burn system (pyrolysis machine included) *extra gas also be storage as fuel for other heating. |
| NO. | Fuel |
| 1 | Oil(fuel oil, tyre oil, heavy oil etc...) |
| 2 | Natural gas |
| 3 | Coal |
| 4 | Firewood |
| 5 | Carbon black pellet |
Our Advantages
1. Security:
A. Adopting automatic submerged-arc welding technology
B. All of the welding will be detected by the ultrasonic nondestructive testing method to ensure the welding quality and the
Welding shape.
C. Adopting manufacture process controlling system on the quality, every manufacture process, manufacture date, etc.
D. Equipped with anti-explosion device, safety valves, emergency valves, pressure and temperature meters, as well as the alarming system.
2. Environmental-friendly:
A. Emission Standard: Adopting special gas scrubbers to remove acid gas and dust from smoke
B. Smell during operation: Fully enclosed during the operation
C. Water pollution: No pollution at all.
D. Solid pollution: The solid after pyrolysis is the crude carbon black and steel wires which can be deep-processed or sold
Directly with its value.
Why Choose Us
Our service
And lifetime maintenance for complete set of machines.
2. Our company sends engineers for installation and commissioning in buyer's site including the training of skills of buyer's
Workers on operation, maintenance, etc.
3. Supply layout according to buyer's workshop and land, civil works information, operation manuals, etc. To the buyer.
4. For the damage caused by the users, our company provides the parts and accessories with cost price.
5. Our factory supplies the wearing parts with the cost price to clients.
