Audited Supplier
FOR PUBLIC HEALTH & ENVIRONMENT
| Medical waste contains potentially harmful microorganisms which could infect people | The World Health Organization (WHO) estimates that 40% of hepatitis cases and 2,5% of HIV cases worldwide are caused by occupational exposure | Treatment and disposal of healthcare waste may release pathogens and toxic pollutants |
Technical characteristics
Microwave disinfection technology uses a microwave sterilization time is short, fast, penetrating ability, inside and outside the temperature uniformity, saving energy, disinfection effect of good characteristics.
In the microwave field, the cell structure is destroyed, destroying the cell inside and outside the material balance, causing cell death.
The combination of microwave and water vapor makes the disinfection effect more effective.
Microwave disinfection does not produce dioxin and malodorous gases, no waste water.
| Compare technologies | LiYing Technology | Autoclave | Autoclave with a shedder | Incinerator |
| (microwave process) | (hot steam process) | (hot steam process) | (high-heat process) | |
| Continuous process | ✓ | X | X | X |
| Integral shredding | ✓ | X | ✓ | X |
| Unrecognisable waste | ✓ | X | ✓ | ✓ |
| Volume of waste reduction | ✓ | X | ✓ | ✓ |
| Mass of waste reduction | ✓ | X | X | ✓ |
| Installation requirements | Low | High | High | High |
| Complexity of the installation | Low | Intermediate | Intermediate | High |
| Possibility of installation "in situ" | ✓ | ✓ | ✓ | X |
| Technology approval and recognition by countries all over the world | High | Intermediate | High | Low |
| Level of sterelization | High | Intermediate | High | High |
| Odours | Low | High | Intermediate | Intermediate |
| Level of noise | Low | Intermediate | Intermediate | High |
| Treatment of pathological and anatomical waste | ✓ | X | ✓ | ✓ |
| Cost | ||||
| ROI | High | Low | Low | Low |
| Investment costs | Intermediate | Low | Intermediate | High |
| Operating costs | Low | High | High | High |
| Maintenance costs | Low | High | High | High |
| Labour costs | Low | High | High | High |
| Environment | ||||
| Impact on the environment | No | Intermediate | Intermediate | High |
| Treated waste recyclable | ✓ | X | X | X |
| No contaminated rejection (such as water, steam) | ✓ | X | X | X |
| Security | ||||
| No risk related to pressurized vessel | ✓ | X | X | X |
| Risk for workforce/personnel health (no risk of toxic contaminants released into the air or the treated waste) | No | Intermediate | Intermediate | High |
| Dimensions | 8.3m lenght x2.9m widthx3.3m high |
| Weight | 13tons |
| Treatment type | Pre-shredding with core-hearting microwave disinfection technology |
| Type of process | Automatic continuous process |
| Processing capacity | 300kg/hr |
| Emissions | Zero emission |
| Energy consumption | 117 kw ( 20° C at 1 atm ) |
| Effectivness | More than 6log10 disinfection |
| Required floor space | 9m x 3m ( 6 m height ) |
| Manpower requirements | No specialized operator / 1 operator |
| Assembly and start-up | One day assembly - start-up & training with our engineers |
Applicable Range
Liying's MDU-type medical waste microwave disinfection equipment is professionally used for the harmless disposal of medical waste, including medical waste that is classified as infectious, traumatic, and pathological waste. It can also be used in epidemics when dealing with sick and dead poultry.
Dialysis Waste
Animal Tissues, Body Parts, and Carcasses
Human Tissues, Body Parts, and Limbs
Biological and Non-Hazardous Pharmaceutical
Needles, Syringes, and other Sharps
Research Waste, Laboratory Specimens, Surgery Waste
Pathology and Histology Samples
Aids and Hepatitis Waste
Isolation Waste
Cultures and Slides
Intravenous Bags, Blood Bags, and Associated Tubing
Animal Bedding
Trace Chemotherapy/anti- neo plastic waste
soft waste (including gauze, bandages, drapes, gowns, and bedding) from patient care, etc.
Unique advantages of microwave with steam synergistic sterilization meet a fast and thorough sterilization rate.
SIMPLE OPERATION
High degree of automation and PLC control allows easy operation by ONE single person with simple training.
ECONOMICAL
Low investment, stable operation with simple maintenance. Only electricity and water are connected, it's efficient and economical.
Zero emission, no hazard airs or water release, no dioxin, without secondary pollution.
FLEXIBILITY
Fixed and Mobile type available, plug and play, flexible, convenient and energy-saving.
MARKET ACCEPTANCE
Significant advantages of high disinfection effect, simple operation, zero emissions allows the technology being quickly recognized by the market.
Technologies Comparation
| Items | LiYing Technology | Autoclave | Autoclave with a shedder | Incinerator |
| (microwave process) | (hot steam process) | (hot steam process) | (high-heat process) | |
| Continuous process | YES | X | X | X |
| Integral shredding | YES | X | YES | X |
| Unrecognisable waste | YES | X | YES | YES |
| Volume of waste reduction | YES | X | YES | YES |
| Mass of waste reduction | YES | X | X | YES |
| Installation requirements | Low | High | High | High |
| Complexity of the installation | Low | Intermediate | Intermediate | High |
| Possibility of installation "in situ" | YES | YES | YES | X |
| Technology approval and recognition by countries all over the world | High | Intermediate | High | Low |
| Level of sterelization | High | Intermediate | High | High |
| Odours | Low | High | Intermediate | Intermediate |
| Level of noise | Low | Intermediate | Intermediate | High |
| Treatment of pathological and anatomical waste | YES | X | YES | YES |
| Cost | ||||
| ROI | High | Low | Low | Low |
| Investment costs | Intermediate | Low | Intermediate | High |
| Operating costs | Low | High | High | High |
| Maintenance costs | Low | High | High | High |
| Labour costs | Low | High | High | High |
| Environment | ||||
| Impact on the environment | No | Intermediate | Intermediate | High |
| Treated waste recyclable | YES | X | X | X |
| No contaminated rejection (such as water, steam) | YES | X | X | X |
| Security | ||||
| No risk related to pressurized vessel | YES | X | X | X |
| Risk for workforce/personnel health (no risk of toxic contaminants released into the air or the treated waste) | None | Intermediate | Intermediate | High |
About Us?
More than 19 medical waste treatment centralize treatment institutes invested and built by LiYing company could finish more than 96000CBM medical waste each year.
- Design of construction layout drawing
- Project construction
- Shipping and transportation
- Installation and commissioning
- Medical waste professional training
- Project recruitment team
- Assist operation management
| ISO 9001 Quality Management System Certivicate | ISO14001 Environmental Management System Certivicate | ISO45001 Occupataional Health and Safety Management System Certificate | CE Verrification of MD Compliance Test Standard: Mechine Directive 2006/42/EC Annex I EN ISO 12100:2010 EN 60204-1:2006+A1:2009 |
76 utility model patents
24 software copyright registration certificates
Product INSPECTION REPORTS by
CCIC Central Plains Agricultural Products & Food Testing (Henan) Co., Ltd.
Our teams
Q1. Are you a factory or trading company?
We are a professional manufacturing factory since the year 2014. Welcome to visit our factory located in Minquan county, Henan province, China.
Q2. How can I visit your factory?
Visit us on site. You are always warmly welcome to visit our factory on site, just feel free to contact us for an invitation letter.
Visit our factory through online video. Or please never hesitate to contact us, our sales staff will contact you and take you to visit our manufacturing workshop and work site through online video.
Q3. Where is your factory? How can I get to your factory?
Our factory is located in Minquan county, Henan province, the nearest airport is Zhengzhou Xinzheng International Airport (CGO), and then two hours by car or train to our factory. Or you can also fly to Beijing or Shanghai air port, then get to your county by a high speed train.
Q4. How long about the delivery time for the medical waste disinfection equipment?
About 20 days to 60days for standard models, feel free to contact us for details.
Q5. Where will the disinfected medical waste go?
The medical waste after microwave disinfection treatment is non-infectious, non-hazardous and unrecognizable inert waste, which can be transported to the local domestic garbage landfill or incineration plant as ordinary domestic garbage for treatment, or part of the medical waste after disinfection treatment can be recycled accordingly. It should be properly handled according to your local laws and regulations.
Q6. I want to build a centralized treatment institute in our city, what could you help me?
Please feel free to contact us NOW, our experienced teams will give you sufficient suggestions on your projects, from marketing research, project scales choose, site selection, land layout, and including economic benefit analysis, operational model, etc. With our 19 centralized treatment centers experience in China, surely we'll help during the whole procedure.
Other Products
Other Products
| Clinical Waste on-site Treatment Device Used for medical waste on-site disinfection in Clinics, small hospitals, etc. | Mobile Medical Waste Disinfection Vehicle Used for treatment of medical waste in remote areas, or emergencies. | Medical Waste Transfer Vehicle Used for medical waste tranported from hospitals or clinics to an centralized treatment center. |
Will you have an customized inquiry, please never hesitate to Contact us Now! We'll give efficient suggestions with quotation.
