Audited Supplier
Controlling the growth of organisms and maintaining a smooth, clean hull minimizes drag and helps to deliver on the intended operational performance of vessels. Biofouling is proven to slow down a vessel by as much as 40%. Without effective antifouling coatings, the industry would potentially have to spend an extra $35 billion* per year on fuel and the environment would have to absorb another 400 million tons of CO2 emissions. (* IMO GHG Study)
Futura Classic is a two component chemically curing aliphatic acrylic polyurethane coating. Giving you a cost effective, nice appearance for industrial use. It has very good application properties and a very good initial finish. Futura classic has a glossy finish, good gloss retention and is a high-solids product.
Model
Paint with Comp A and Hardener with Comp B.
Typical use
Marine: Recommended for topside, deck and superstructure.
Key features
Attractive appearance
Good application properties
Cost effective
Excellent initial finish
Good gloss retention
| Physical state | Liquid. |
| Color | Brown., Black, Blue., Clear., Green., Grey, MCI Base 1, MCI Base 2, MCI Base 3, MCI Base 5, MCI Base 6, Off-white., Orange, Pink, Red, White., Yellow. |
| Odour | Characteristic. |
Odour threshold | Not applicable. |
Melting point/freezing point | Not applicable. |
Initial boiling point and boiling range | Lowest known value: 126°C (258.8°F) . Weighted average: 140.89°C (285.6°F) |
Flammability | Not applicable. |
Upper/lower flammability or explosive limits | 0.8 - 7.6% |
Flash point | Closed cup: 27°C (80.6°F) |
Auto-ignition temperature | Lowest known value: 280 to 470°C (536 to 878°F) (hydrocarbons, C9, aromatics). |
Decomposition temperature | Not applicable. |
pH | Not applicable. |
Viscosity | Kinematic (40°C): >20.5 mm2 /s |
Solubility(ies) | |
| Media | Neither solubled in the cold water and hot water |
Partition coefficient: n-octanol/ water | Not available. |
Vapour pressure | Highest known value: 1.5 kPa (11.3 mm Hg) (at 20°C) . Weighted average: 0.9 kPa (6.75 mm Hg) (at 20°C) |
Evaporation rate | Highest known value: 1 Weighted average: 0.8compared with butyl acetate |
Density | 1.266 to 1.513 g/cm³ |
Vapour density | Highest known value: 4 (Air = 1). Weighted average: 3.71 (Air = 1) |
Explosive properties | Not available. |
Oxidising properties | Not available. |
Particle characteristics Median particle size | Not applicable. |
MECHANICAL RESISTANCE AND TOLERANCE
Protecting your deck from impact and abrasion is critical to ensuring operational availability. Our coating systems are designed to keep your decks operational for extended durations and provide additional functionality such as low solar absorbency, lower installed weight and non-skid which enhance operational value to you.
From low temperature-curing, rapid repair and cosmetic enhancement, our full range of deck coating systems are approved to the highest performance standards - we make it easy to choose the right deck coating system for your vessel in both general and landing areas.
HULL PERFORMANCE AND CORROSION PROTECTION
Jotun is a world leader in hull performance - delivering verified average speed loss and fuel savings across our range of state-of-the-art anti-fouling coatings and through revolutionary solutions such as Hull Skating Solutions.
Jotun have tailor-made anticorrosive coatings for newbuildings and drydocking - including solvent-free and low-VOC products.
CHEMICAL RESISTANCE
