Audited Supplier
Mass Transfer Media Metal Wire Gauze Structured Packing for Absorption Tower
The earliest Metal Wire Gauze packing was invented by Sulzer in 1960s. It is called Gauze Packings. Geometry structure will provide large surface area. Wire mesh's capillary function also enlarge surface area's wettability. When filling into the column, upper and lower filling trays cross by 90. It has advantages of high effectiveness, low pressure drop and large flow rate. It is used in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.
Model | FXM-220926-A1 | ||||||
Material | PP/PVC/Stailness steel/Copper/Carbon steel/Aluminum/Ceramic | ||||||
Plastic Corrugated Plate Packing (X: Incline angle 30°, Y: Incline angle 45°) | |||||||
Type | Surface Area m2/m3 |
Volid %
| Pressure Drop Mpa/m | Packing Density Kg/m
| Theo Plate | Liquid Loading m3/m2.hr |
m-1
|
SB-125Y | 125 | 98 | 2*10-4 | 45 | 1-2 | 0.20-100 | 3 |
SB-250Y | 250 | 97 | 3*10-4 | 60 | 2-2.5 | 0.20-100 | 2.6 |
SB-350Y | 350 | 94 | 2*10-4 | 80 | 3.5-4 | 0.20-100 | 2 |
SB-500Y | 500 | 92 | 3*10-4 | 130 | 4-4.5 | 0.20-100 | 1.8 |
SB-125X | 125 | 98 | 1.4*10-4 | 40 | 0.8-1.9 | 0.20-100 | 3.5 |
SB-250X | 250 | 97 | 1.8*10-4 | 55 | 1.5-2 | 0.20-100 | 2.8 |
| SB-350X | 350 | 94 | 1.3*10-4 | 75 | 2.3-2.8 | 0.20-100 | 2.2 |
| SB-500X | 500 | 92 | 1.8*10-4 | 120 | 2.8-3.2 | 0.20-100 | 2 |
Plastic Knitting Gauze Packing | |||||||
| Type | Surface Area m2/m3 | Volid % | Theo Plate | Packing Density Kg/m3 | Pressure Drop Mpa/m | ||
| 500X | 500 | 95 | 4.5-5.5 | 250 | 30*10-4 | ||
| 500Y | 500 | 95 | 4-5 | 250 | 1.97*10-4 | ||
| 700X | 700 | 87 | 8-10 | 350 | 4.6-6.6*10-4 | ||
| 700Y | 700 | 87 | 6-7 | 350 | 3.33*10-4 | ||
Metal Corruated Plate Packing | |||||||
| Type | Surface Area m2/m3 | Volid % | Theo Plate | Wave Crest Height mm | Pressure Drop Mpa/m | ||
| 125Y | 125 | 98.5 | 1-1.2 | 24 | 1.5*10-4 | ||
| 250Y | 250 | 97 | 2-3 | 12 | 1.52*10-4 | ||
| 350Y | 350 | 95 | 3.5-4 | 8 | 1.5*10-4 | ||
| 450Y | 450 | 93 | 4-4.5 | 6.5 | 1.8*10-4 | ||
| Metal Wire Gauze Packing | |||||||
| Type | Surface Area m2/m3 | Volid % | F Factor m-1 | Wave Crest Height mm | Pressure Drop Mpa/m | ||
| CY | 700 | 87-90 | 5 | 4.3 | 5*10-4 | ||
| BX | 500 | 95 | 1.6 | 6.3 | 1.5*10-4 | ||
Application 1. Sea water deaerators 2. Waste gas purification, drying and gas, water sluble solvents absorbers 3. HCL and H2SO4 production 4. Air seperation 5. Strippers 6. Vacuum and atmospheric crude oil fractionator 7. Negative pressure, normal pressure and pressurization operation 8. Liquid/liquid extraction 9. Ethylene water quench tower | |||||||
- The number of theoretical plates is high, the flux is large, and the pressure is reduced;
- The low load performance is good, the number of theoretical plates increases with the decrease of the gas load, and there is almost no low load limit;
- The operating flexibility is large; the amplification effect is unclear;
- 4. It can meet the requirements of precise, large-scale and high-vacuum distillation equipment. It provides favorable conditions for the rectification separation of difficult-to-separate materials, heat-sensitive materials and high-purity products.
As the first domestic enterprise whom fully achieved Industry 4.0 Production layout and "5G+RAID+AGV+MEC+WMS"Intelligent Management in mass transfer field,Aite Covered area is over 35000 SQM, which owned fully automatic injection workshop,the R&D center integrating design, processing and maintenance,Centralized and integrated metal stamping workshop,assembled type tower Internals workshop,Experimental simulation device and so on. Those equipments have made Aite a leading company in the industry, also attracted Tianjin University,Zhejiang University,East China University of Science and Technology,Zhejiang University of Technology,Zhongtai Chemical's research institute technical support.
Relying on many years development and powerful equipment & techincal support, Aite established Suzhou Kaient Environmental Engineering Co., Ltd., WuXi Bazhen Machinery Co., Ltd,Tianjin Tianyuan Technology Co., Ltd.Jinta Group's Aite Metal structured packing branch,Xiangdong Ceramic Branch,Pingxiang Fxsino Petrochemical Packing Co., Ltd.one after another.Mainly developed in mass transfer product,tower internals, wastewater treatment filler,VOCS series,cooling tower filler, random & structured packing, EPC project and on. Furthermore, owned 2 international patents and 5 Chinese patents on the development journey.
Most products are widely used in chemical industry, chemical fertilizer industry, coking industry, chlor-alkali industry, salinization, electric power, environmental protection, oil refining, coal to liquid, pharmaceutical, fire protection etc.Annual Output is over 300000 cbm.Output value is about RMB 300,000,000.00
Currently, FXSINO can fully achieve"one station service" from technological design from all mass transfer product production.
Typical Application:
1:Metal wire gauze packing is used for Fine chemical, flavors factory, isomer separation. The separation of thermally sensitive materials, testing tower and the improvement of tower.
2:250(AX) Precision rectification for high productive capacity and less theoretical plate number.
3:500(BX) Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa .
4:700(CY) Separation of isotopic compound and isomeric compound.
