Audited Supplier
HYS-3
Remote Operation, Video Calls, House Calls
1 Year
Customizable
Customizable
Impact Testing Machine
Customizable
Customizable
Electronic Load
Customizable
Digital
Computer Control
Customizable
AC220V
Customizable
50 (Including Fixtures, Test Pieces, Sensors, etc.
Half Sine Wave
Free Fall
Not Less Than 3 Times
220VAC±10% 50Hz
0~40
<85%
≤0.8MPa
HUANYI
Standard Export Wooden Box
Customized
China
9024800000
Product Description
Mechanical Impact Resistance Test Machine Used to measure and determine the impact resistance of products or packaging, to assess the functional reliability and structural integrity of the test product under impact environment
This equipment meets GB/T2423.5 "Basic Environmental Test Procedures for Electrical and Electronic Products Ea: Impact Test Method", GB/T2423.6 "Basic Environmental Test Procedure for Electrical and Electronic Products Ea: Collision Test Method", GJB150.18-2008 "Military Equipment environmental test method: impact test and other relevant test standards for impact test requirements. For the new energy sector, meet GB/T 31467.3-2015.
(1) Windows-based stable control system: fully automatic remote control interface, the operator only needs to input simple values;
(2) Full air pressure drive lift, impact, clean and environmentally friendly, good repeatability and high reliability;(3) It can pass steel welded table with high strength and hardness and high first-order resonance frequency, low noise and no clutter generation; adjust gas pressure to control shock frequency, frequency is continuously adjustable, system is more stable and reliable, and software operation is convenient ;
(4) The test time and the number of impacts can be set arbitrarily, and the machine will automatically stop after the test is completed, which is convenient for users to operate;
(5) Perfect measurement system: various waveform tolerance bands of system memory, convenient for users to adjust and apply, automatically complete the test report generation after the end of the test;
(6) The control unit has door protection, flying protection and zero signal protection to ensure the safety of the system.
(7) Advanced drive system: It is driven by full air pressure, with simple structure and high reliability. And no pollution, can keep the environment clean and sanitary;
(8) High efficiency and high precision: The advanced pneumatic drive and control system greatly improves the test efficiency;
(9) Double-track guide post: combined with pneumatic balance lifting system, no noise, fully automatic positioning table;
(10) Convenient installation: The device comes with high-performance buffer vibration isolation device, no need for special foundation, easy to install, safe and reliable.
| Main technical indicators | ||
| Rated load (kg) | 50 (including fixtures, test pieces, sensors, etc.) | |
| Shock pulse waveform | Half sine wave | |
| Pulse form | Free fall | |
| Peak acceleration (m/s2) | Half sine: 150 m/s2 to 5000 m/s2 (1g=9.8 m/s2, up to 600g at 3ms) After peak sawtooth wave: 150 m/s2 to 3000 m/s2 Trapezoidal wave: 150 m/s2 to 1000 m/s2 | |
| Pulse duration (ms) | Half sine: 30ms ~ 1ms After peak sawtooth wave: 18ms ~ 3ms Trapezoidal wave: 18ms ~ 6ms Maximum speed change rate: ≥7.4m/sec Lifting height: 1500mm (using hydraulic lifting, designed for international mainstream) | |
| Impact direction | Z axis | |
| Continuous impact times | Not less than 3 times | |
| Precision requirements | Meet the 6.2.2 tolerance requirements in GJB 150.18A | |
| Table size (length × width) | 500mm×500mm | |
| Dimensions (length × width × height) | Subject to the real thing | |
| Total weight of equipment (kg) | 2500 | |
| power supply | 220VAC±10% 50Hz | |
| User provides environmental conditions | Temperature (°C) | 0~40 |
| Humidity (25 ° C) | <85% | |
| Stable gas source (MPa) | ≤0.8MPa | |
| Applicable standard | GB2423, GJB150, GB/T 31467.3, IEC68-2-29, etc. | |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
