1 ton capacity worm gear screw jack mechanical actuator is produced in many standard models with a wide range of capacities, there is a standard model for almost any requirement. Operated manually or by means of gear motors, machine screw actuator models can be used singly, in tandem or in multiple arrangements.
1. Upright or inverted units with maximum static load capacity 1 ton in tension or compression.
2. With higher ratios are inherently self-locking and will hold the loads without creep as long as the screw jack is not subject to vibration.
3. Lifting screw with 24mm diameter, 4mm pitch (single start trapezoidal screw thread).
4. Available in 6:1 and 24:1 ratios.
5. Custom travel lengths from 5mm to 1500mm.
6. Translating lifting screws (travelling screw jacks), keyed lifting screws for anti-rotation (keyed screw jacks), and rotating lifting screws with traveling nut (travelling nut screw jacks) as the standard configurations.
7. Worm screw (input shaft) is rotated by a handwheel with handle (manually operated screw jack) or by a gear motor (electrically operated screw jack).
8. Can be applied either individually use or in tandem or in multiple arrangements for exactly synchronized lifting system, linked by connecting shafts, bevel gears and couplings etc.
We use the best materials to guarantee the performance and lifetime of the screw jacks you purchased.
- Trapezoidal screw material - C45 steel. Customized stainless steel 304, 316.
- Worm shaft material - C45 steel, heat treatment. Customized stainless steel 304, 316.
- Worm gear material - high strength bronze.
- Housing material - ductile iron, available in stainless steel 304.
- Traveling nut - high strength bronze.
- Safety nut - high strength bronze.



1. Note: The dark gray figures in the tables indicates operational restrictions due to thermal limits. Selection of screw jacks using these figures should only be carried out in consultation with our engineers. When your selection is made within the areas shaded dark gray, you will need to reduce duty cycle or choose the bigger size screw jack in order to allow effective heat dissipation.
3. H=high ratio, L=slow ratio.
4. Nm=input torque required, kW=input power required. Find out front view, side view and top view assembly drawings.

* Free 2D AutoCAD Assembly Drawings (PDF, DWG, DXF Format).
* Free 3D CAD Model Assembly Drawings (STP/STEP, IGS/IGES, SLDPRT, MODEL, CATPART Format).
Before packing, all Customers' orders will be inspected following Production Drawings and Inspection Report.* Inspection of Screw Jack: model, screw diameter, screw pitch, installation type, basic design, stroke length, screw end types, wormgear ratio, worm shaft diameter, input shaft types, motor flange types, accessories, lubrications, housing color, orders with special requirements, smooth lifting.
* Inspection of Bevel Gearbox: model, input shaft diameter, output shaft(solid or hollow) diameter, input flange dimensions, shaft arrangements, rotation directions, mounting positions, gear ratios, accessories, lubrications, housing color, orders with special requirements.
* Inspection of Lifting System: except above points, must inspect the order quantities of jacks, gearboxes and others.


* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.

* America: United States, Mexico, Canada, Chile, Bolivia, Brazil, Colombia, Dominican Republic, Honduras, Argentina, Peru.
* Europe: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
* Australia: Australia, New Zealand, Fiji.
* Africa: South Africa, Egypt, Ethiopia, Nigeria.

