Audited Supplier
SMF-10
White Powder
Concrete Admixture, Grouting Material, Self-Leveling Compound
Sulfonated Melamine Formaldehyde
Rapid Setting Time
High-range Water-reducing Agent
10%-20%
sidleychem
Paper Bag
25 kg / 55 lb paper bag
China
Product Description
Product Description
Water Reducing Agent
Melamine Superplasticizer
SMF-10
| Chemical Nature | SMF-10 Melamine water reducer is a water-soluble anionic water-reducing agent. Its main component is sulfonated melamine formaldehyde resin with solid adsorption and dispersion effects on cement, and it has excellent comprehensive performance in concrete and dry-mixed mortar. | ||||||||||||
| Typical Properties |
| ||||||||||||
| Features of application | 1. High water-reducing rate and no air entrainment; improve the workability of fresh cement products and segregation stability; improve the early strength and durability of the product. 2. There is low sulfate, extremely low chloride ions, and no corrosion to steel bars. 3. Cement adaptability and compatibility with redispersible polymer powder, cellulose ether, and other additives. Applications 1. SMF-10 Melamine water reducer has good dispersion properties for aluminate and a good water-reducing effect. It can be used in refractory concrete, bricks, refractory castables, and other aluminate materials to significantly improve refractory materials' resistance. It can enhance the compressive and flexural strength, reduce the moisture porosity of refractory materials, increase the density, and extend the life of refractory materials. 2. SMF-10 Melamine water reducer is used in self-leveling cement mortar, non-metallic wear-resistant floors, and grouting materials to improve the workability of the materials, increase the hardness and smoothness of the floor surface, and prevent cracks. 3. SMF-10 Melamine water reducer is used in waterproof mortar and emulsion modifiers to improve the impermeability of concrete or mortar. 4. SMF-10 Melamine water reducer prepares high-strength concrete, pumped concrete, colored concrete, decorative products, high-strength mortar, and repair mortar. | ||||||||||||
| Usage | Pre-mix evenly with other dry powder components before packaging. Mix and use on-site according to the recommended amount of water. The recommended addition amount is 0.5%-1.5% of the cementitious material, which must be pre-tested according to the raw materials and construction specifications before use. | ||||||||||||
| Packaging | 25 kg / 55 lb paper bag | ||||||||||||
| Storage condition | Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use. | ||||||||||||
| Product safety | According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information. | ||||||||||||
| General | The usual safety precautions when handling chemicals must be observed. These include the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles. | ||||||||||||
| Material Safety Data Sheet | All safety information is provided in the Material Safety Data Sheet for Melamine Superplasticizer | ||||||||||||
| Transport Regulation | Not known as a dangerous good according to transport regulations. |
Packing for Transportation
1 | This product is packed in 25kg bags out HDPE bags inner with LDPE bags. |
2 | Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use. |
Company Profile
SIDLEYCHEM has extensive experience in the production of concrete admixtures. We can adjust the synthesis process according to the customer's needs and provide solutions for different materials and climates. SIDLEYCHEM has a professional concrete laboratory, which can help customers optimize the proportion of C60/c80/c100 strength concrete, reduce costs and the strength still meet the technical requirements of the concrete. SiDLEYCHEM to provide customers with professional, customized one-stop product suppiy services and systermized solutions. Whatever suits you is the best product.
Our Factory
Exhibition
Our Advantages
Top class R&D laboratory