Audited Supplier
Meraif is the leading SMT factory solution provider in China,offering professional SMT factory building advice and service.
We have 18 year experience about SMT factories,offering full solutions for global clients with our great advantaged sources.
All SMT machines and SMT spare parts for PCBA assembly we can support you ,SMT pick and place machines,SMT Solder Paste Printers, Reflow Oven, Wave Soldering Machines,3D AOI,3D SPI,PCB Cleaning Machines,PCB Cutting Machines.
Our core technology team members are well experienced in SMT filed, One-stop SMT Solution for PCBA factory Through Asian supply chain output, Meraif support customers build factories including technical evaluation, equipment provision, workshop planning, technical support .
JUKI RX-6R/RX-6B SMT Pick And Place Machine
Prevention of defective PWBs and rapid analysis
An ultra miniature camera built into the head section captures images of component pick and placement in real time. An analysis is run for presence/absence and traceability information can be saved. This unique function prevents defective PWBs and reduces the time for root cause failure analysis. Component upside down: If a component is supplied upside down, an error is displayed and the machine is stopped automatically.
Machine construction for high-speed component placement
High-speed component placement in a very compact footprint: 1.25mm wide. Each machine is equipped with two heads, each with its own LaserAlign sensor. Components are centered on-the-fly between the pick and placement location. Direct travel between the pick and placement enables high speed placement with great accuracy.
Vision recognition technology for high-speed component placement
- Dual cameras enables high speed placement of large and odd-form components
- Dual centering technology: Each head includes a LaserAlign sensor in addition, dual upward looking strobing cameras capture images in high speed for large, fine pitch, or odd-form components.
- Dual centering methods allow the machine to use the fastest and best method for each component type, based on size, shape and design.
Wide component range
The 6 nozzle head supports components from 0402 (01005) up to 33.5mm square and height up to 33mm. The 3 nozzle head supports an even wider variety: from 0402 (01005) chips up to 100mm square or 50mm x 180mm long connectors with height up to 33mm. These heads are designed to handle a wide variety of components from ultra miniature resistors to large ICs or connectors.
Flexibility by changing the head unit
The rear head can be changed between a 6 nozzle head and a 3 nozzle head, giving greater flexibility to configure the production line to according to the current requirements.
PoP (Package on Package) support
3D or package-on-package (PoP) placement is possible using the optional fluxer units. Support for both flux and solder paste is available.
Laser centering technology for high accuracy placement
The machine can recognize components of various shapes: from ultra miniature components such as 0402 (01005) chips ups to 33.5mm square components such as PLCCs, SOPs, BGAs, and QFPs. When the machine recognizes a component, programming is made simplier and variations such as shape, color, and reflection do not matter with LaserAlign technology
Features
Compact footprint : the width is just 1.25m
Equipped with standard Placement Monitor check function.*1
Replaceable head allow you to configure a production line best suited to the current repirments.*6
High-speed component placement using high-speed non-stop vision recognition.*3
Wide range of components and boards: tall components, large components and large boards.
Brand new Matrix Tray Sever TR8S improves the component capability and productivity.
| Modle Name | RX-6R | RX-6B | |||
| Head | 6x6 nozzle head | 6x6 nozzle head | 6x3 nozzle head | ||
| Board Size | Single Lane: | 50x50~610x590/905x590mm(2times clamping) | |||
| Dual Lane: | - | 50x50~360x250mm | |||
| Component Height | 6/12/20mm | 6/12/20/25/33mm | |||
| Component Size | Laser recognition(01005) | 0402~50mm | 0402~50mm | 0402~33.5mm | |
| Vision recognition | Standard camera | 3~33.5mm | 3~33.5mm | 3~100mm/50×180mm | |
| High-resolution camera | 1005~24mm | 1005~20mm | 1005~48mm/24×72mm | ||
| Placement Speed | CHIP | Optimum | 52,000CPH | 42,000CPH | 34,000CPH |
| IPC9850 | 29,000CPH | 26,000CPH | 23,000CPH | ||
| IC | 14,000CPH | 14,000CPH | 11,000CPH | ||
| Placement Accuracy | Laser recognition | ±0.04mm(Cpk>=1) | ±0.04mm(Cpk>=1) | ±0.04mm(Cpk>=1) | |
| Vision recognition | ±0.04mm | ±0.04mm | ±0.03mm | ||
| Component Loading Quantity | Max.160 in case of 8mm tape(on a Electric double tape feeder) | ||||
| Power Supply | AC200~415V,(3-Phase) | ||||
| Apparent Power | Max .3.5kVA | ||||
| Operation Air Preasure | 0.5±0.5Mpa | ||||
| Air Consumption: | 100L/min | ||||
| Mass(Kg) | Single Lane | Approx. 1,800Kg | Approx. 1,800Kg | ||
| Dual Lane | - | Approx. 1,830Kg | |||
| Machine dimensions (W×D×H) | 1,250x2,095x1,440mm | ||||
| 1.Single lane conveyor specification mode max. 360x450mm. 2.Optional. 3.Placement speed of IC components is estimated value when placing 36 pieces QFP Component(dimension 10mm sauare of smaller) on M size PWB overall,picking from both front and rear side with all nozzles simutanesuly. 4.Machine width measure (D) does not include display.Machine heiht measure (H)does notin clude signal light an display. | |||||
| Recognitions system | High-resolution camera |
| Operation System | Windows 7 |
| Inspection function | Conplanarity sensor/Component Verification System(CVS)/SOT detection check funtion |
| Conveyor | Conveyor extention |
| Electrical protection | Ground-fault interrupter |
| Force control | Force control nozzle |
| Others | FCS Calibration Jig/Mini-signal light tower/Super foot/Offset placement after solder screen-printing/Solder lighting/Placement monitor(data srorage &analysis function)/Flucer unit (Linear Tyoe,Rotary Type) Csster/Rear-side operation unit |
| Software | IS/IFS-NX/EPU |
| Component handing and feesers | Feeder Trolley/Electric tape feeder/Electric stick feeder/High Speed Matrix Tray Server TR7DN/TR8S Tray Holder/IC collection belt/Trash box/Tape reel mounting base/Feeder trolley/Feeder stocker/Splicing jig/Feeder Calibration Jig with Monitor/Tray holder/Eletric Trolley Power Station |
MERAIF-SMT- Complete SMT Line Manufacturers
Your Strong SMT Partner For SMT Line Equipment, SMT Spare Parts & SMT Extras-One-Stop Service.
Meraif Success StoriesMeraif provides overall technical solutions for electronic factory setup, makes rational planning for governments, institutions, associations and as well as share technical ideas with partner.
Meraif prefers to cooperate with global manufacturers and service providers in a cooperative manner, and its main cooperation groups are factories or enterprises in the SMT industry chain.
Meraif-One-Stop SMT Solution Provider
Why We Can Be Your Reliable Partner:
We Can Make Cost-Effective Quotation Plans Based On Your Production Capacity And Budget.
ALL Brands Of SMT Machines Have The Same Quality, And We Can Provide Better Prices And Services.
Our Company Has Engineers With More Than 15 Years Of Experience In Yamaha, Juki, Panasonic, FUJI, Hanwha/Samsung To Serve You.
Our Engineers Can Go To Your Factory For On-Site Installation Training, And Can Also Recommend Local Engineers For You.
After-sales problems will be feedback within 2 hours, and solutions will be provided within 24 hours.
